Basalt Cladding Panel Blank
Rectangular basalt slab thicker than 7.5 cm, sawn as a blank for later processing into wall cladding panels. HTS 2516.12.0030 applies as basalt building stone merely cut by sawing into qualifying rectangular slabs.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If pre-finished for direct cladding installation
Finished panels are worked stone in 6802.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Label as 'blanks for further fabrication' to clarify end-use without implying completion
• Ensure no pre-applied finishes; residue from quarry processing is allowed
Related Products under HTS 2516.12.00.30
Thick Granite Countertop Slab
A large rectangular granite slab, sawn to dimensions with a thickness exceeding 7.5 cm, used primarily for fabricating kitchen countertops and bathroom vanities. It falls under HTS 2516.12.0030 as monumental or building stone merely cut by sawing into blocks or slabs of rectangular shape, with the specified minimum thickness, and not further worked.
Heavy Basalt Building Block
Roughly trimmed rectangular basalt block sawn to over 7.5 cm thick, intended for structural building walls or facades in construction projects. Classified under HTS 2516.12.0030 as 'other monumental or building stone' merely cut into rectangular slabs or blocks meeting the thickness criterion.
Thick Granite Paving Slab
Heavy-duty granite slab, rectangular and sawn to 8-10 cm thickness, designed for heavy-traffic paving in plazas or driveways. Classified in HTS 2516.12.0030 as granite building stone meeting the rectangular slab and thickness specs, not yet setts or curbstones.
Sandstone Column Base Block
Sawn sandstone block over 7.5 cm thick, rectangular for use as bases in architectural columns or pillars. Meets HTS 2516.12.0030 for sandstone slabs of specified thickness, merely cut.
Thick Sandstone Wall Slab
Rectangular sandstone slab sawn to a thickness of 7.5 cm or greater, used for exterior wall cladding in architectural projects. It qualifies for HTS 2516.12.0030 due to being sandstone, a listed building stone, merely cut by sawing without further fabrication.
Porphyry Monumental Block
Large porphyry stone block sawn into rectangular form over 7.5 cm thick, suitable for memorials, sculptures, or grand building bases. Falls under HTS 2516.12.0030 as porphyry, explicitly named monumental stone, roughly trimmed or merely cut.