Turbojet Turbine Nozzle Guide Vane
Stator vanes that direct high-temperature exhaust gases onto turbine blades in turbojet engines, made from heat-resistant nickel alloys. They are classified as parts of turbojets under tariff item 8411.91.00, distinct from complete turbine assemblies.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the guide vanes are for other gas turbines
This covers parts for gas turbines other than turbojets or turbopropellers, which may apply if the vanes are for industrial turbines.
If the guide vanes are for reaction engines other than turbojets
This covers parts of other reaction engines, which may apply if the vanes are used in ramjets or pulsejets.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Declare the guide vanes as parts of a turbojet under 8411.91.00, with evidence of their heat-resistant material and specific design
• Ensure they are not classified as complete turbine stages
• Provide material certifications and engineering specifications to the CBSA
Related Products under Tariff item 8411.91.00
Cast Iron Accessory Gearbox Mounting Frame
A rough cast iron frame that mounts the accessory gearbox on aircraft turbofan engines. Basic cleaning and machining for gate removal only, making it an unfinished part of a turbojet.
Cast Iron Bearing Housing
A cast iron housing for main bearings in aircraft turbojet rotor assemblies. It is cleaned, fins/gates removed, and machined for location only, meeting the requirements for an unfinished aircraft turbine part.
Cast Iron Bearing Housing for Civil Turbofan Engine
A cast iron bearing housing that supports the main bearings in a civil turbofan engine used on passenger aircraft. The part has undergone only cleanup machining to remove casting artifacts, making it an unfinished component of a turbojet or turbopropeller.
Cast Iron Compressor Stator Vane Carrier
A cast iron support structure holding stator vanes in the compressor stage of aircraft turbopropellers. Produced by casting, cleaned, and machined solely for casting defect removal and fixturing, qualifying as an unfinished part.
Cast Iron Compressor Stat or Vane for Civil Jet Engine
Cast iron stator vanes that guide airflow in the compressor stage of civil jet turbojet engines. The machining is limited to casting defect removal, so the part is considered an unfinished component of a turbojet.
Cast Iron Exhaust Nozzle Segment for Turboprop Civil Aircraft
A segmental cast iron component forming part of the exhaust nozzle in civil turboprop engines. It is machined solely for casting cleanup and fixturing, making it an unfinished part specifically for turbopropellers.