Other
Turbo-jets, turbo-propellers and other gas turbines. > Parts: > Other
Duty Rate (from China)
Products classified under Tariff item 8411.99.00
Cast Iron Bearing Housing Blank
> An unfinished cast-iron housing blank for gas turbine bearings, with fins and sprues removed and locator holes drilled. This product is in a basic processing state, suitable for further finishing into a bearing housing. It falls under tariff item 8411.99.00 as a part of gas turbines, not yet advanced beyond cleaning and minimal machining.
Cast Iron Bearing Housing Rough Casting for CFM56 Engine
A rough cast iron housing for main bearings in CFM56 civil aircraft gas turbines used in Boeing and Airbus. It is cleaned and minimally machined for location purposes.
Cast Iron Bearing Housing Rough Machined
A rough machined cast iron housing for main bearings in aircraft gas turbine engines, cleaned of fins and gates only. The housing is prepared for subsequent finishing operations. It is classified as a part of a gas turbine under tariff item 8411.99.00.
Cast Iron Combustion Chamber Flange
A cast iron flange ring used to bolt combustion chambers in stationary gas turbines. It has been cleaned and machined only to remove sprues and locate bolt circles, making it a rough part of a gas turbine.
Cast Iron Combustion Chamber Flange Rough Casting
> A rough flange casting for gas turbine combustion chambers, made of cast iron, with only cleaning and sprue machining performed. This product is in a basic state, intended for further finishing into a combustion chamber flange. It is classified under tariff item 8411.99.00 as a part of gas turbines, as it has not undergone advanced processing.
Cast Iron Combustion Chamber Support for LEAP-1 Engine
A cast iron support ring for the combustion chamber of CFM LEAP-1 gas turbines, used in civil aircraft such as the Airbus A320neo. The casting is minimally machined only to remove risers and locate it for subsequent finishing operations. It qualifies as a part of a gas turbine under tariff item 8411.99.00.
Cast Iron Compressor Housing for Boeing 737 Gas Turbine
A rough cast iron stator housing for the compressor section of civil aircraft gas turbines, such as those used in Boeing 737 aircraft. The casting is cleaned and lightly machined only to remove casting imperfections and for fixturing purposes. It is classified as a part of a gas turbine under tariff item 8411.99.00.
Cast Iron Compressor Impeller Hub
A rough cast iron hub for mounting compressor impellers in stationary gas turbines. It has been machined only to remove sprues, leaving it as a basic part of a gas turbine.
Cast Iron Diffuser Case for GE90 Civil Turbine
A cast iron diffuser casing that slows airflow after the compressor in GE90 gas turbines used in Boeing 777 civil aircraft. The casing has limited processing, only for fins and sprues removal. It is a part of a gas turbine under tariff item 8411.99.00.
Cast Iron Diffuser Ring Blank for Gas Turbine
> A basic diffuser ring casting made of cast iron, cleaned and with risers machined off for positioning in CNC. This product is an unfinished part for gas turbines, suitable for further machining into a diffuser ring. It falls under tariff item 8411.99.00 as a part of gas turbines, given its limited processing state.
Cast Iron Diffuser Support Strut
Cast iron radial struts that support diffuser walls in gas turbine exhaust systems. They are rough machined only for gate removal and fixture points, making them parts of stationary gas turbines.
Cast Iron Exhaust Collector Box
A rough cast iron box that collects exhaust from multiple turbine stages in industrial gas turbines. It has undergone only basic machining, such as cleaning and gate removal.
Cast Iron Exhaust Manifold Rough Casting for Turbojet
> An unfinished cast-iron manifold for turbojet exhaust systems, with only fins and gates removed and basic mounting faces machined. This product is in a rough state, intended for further finishing into an exhaust manifold. It is classified under tariff item 8411.99.00 as a part of gas turbines, as it has not been advanced beyond cleaning and minimal machining.
Cast Iron Exhaust Nozzle Base for Civil Jet Engines
A rough-machined cast iron base ring for the exhaust nozzle in civil jet engines. The machining is limited to cleaning and sprue removal, preparing it for later finishing. It is classified as a part of a gas turbine under tariff item 8411.99.00.
Cast Iron Fan Frame Casting for Trent 1000 Turbine
A rough cast iron frame supporting the fan section in Rolls-Royce Trent 1000 gas turbines for Boeing 787 civil aircraft. The casting is cleaned and fins are removed only, with no further machining. It is a part of a gas turbine under tariff item 8411.99.00.
Cast Iron Gas Turbine Base Frame Casting
A large rough cast iron base frame that supports the entire gas turbine package in power plants. It has minimal machining, limited to lifting lugs and alignment points.
Cast Iron Gas Turbine Casing Blank
> A rough cast-iron housing component for gas turbine engines, cleaned and minimally machined only to remove casting imperfections like fins and risers. This product is suitable for further finishing into a turbine casing. It falls under tariff item 8411.99.00 as a part of gas turbines, given its basic processing state.
Cast Iron Gas Turbine Compressor Casing
A rough-machined cast iron housing for the compressor section of industrial gas turbines used in power generation. It is cleaned and machined only to remove fins, gates, sprues, risers, or for fixture locations.
Cast Iron Gas Turbine Exhaust Diffuser
A cast iron diffuser that slows and diffuses exhaust gases from industrial gas turbine exhaust stages. It features only cleaning and basic locator machining post-casting.
Cast Iron Gas Turbine Foot Mount Blank
> A basic foot mounting casting in cast iron for gas turbines, with gates removed and base machined for location. This product is in a rough state, intended for further finishing into a foot mount. It is classified under tariff item 8411.99.00 as a part of gas turbines, as it has not undergone advanced processing.
Cast Iron Gas Turbine Impeller Core Blank
> A rough impeller hub casting in cast iron for gas turbines, cleaned of flash and sprues with locator pads machined. This product is in a basic state, suitable for further finishing into an impeller hub. It falls under tariff item 8411.99.00 as a part of gas turbines, given its limited processing.
Cast Iron Gas Turbine Liner Support
A cast iron support structure that holds combustion liners in gas turbine combustors. It is rough with only locator machining, making it a part of a stationary gas turbine.
Cast Iron Gas Turbine Spacer Ring Blank
> A rough spacer ring in cast iron for turbine assemblies, cleaned and minimally machined for positioning. This product is intended for further finishing into a spacer ring. It is classified under tariff item 8411.99.00 as a part of gas turbines, as it has not been advanced beyond basic processing.
Cast Iron Impeller Support Casting for Embraer E-Jets
A cast iron support structure for impellers in gas turbines of Embraer E-Jets civil aircraft. The casting is processed only to remove risers and fins for placement in finishing machinery. It is classified as a part of a gas turbine under tariff item 8411.99.00.
Cast Iron Inlet Duct Flange for Airbus A320 Turbine
A cast iron flange connecting the air inlet duct in civil aircraft gas turbine engines such as the Airbus A320. The flange is machined solely for gate removal and alignment in finishing equipment. It is a part of a gas turbine under tariff item 8411.99.00.
Cast Iron Scroll Housing Casting for Turbine
> A rough scroll-shaped cast-iron housing for gas turbine scrolls, cleaned and minimally machined for risers only. This product is in a basic state, suitable for further finishing into a scroll housing. It falls under tariff item 8411.99.00 as a part of gas turbines, given its limited processing.
Cast Iron Shaft Sleeve Blank for PW4000 Engine
A rough cast iron sleeve blank protecting shafts in Pratt & Whitney PW4000 civil aircraft gas turbines. The sleeve is machined only to permit finishing machinery location. It is classified as a part of a gas turbine under tariff item 8411.99.00.
Cast Iron Transition Duct Casting
> A rough transition duct casting connecting turbine sections in cast iron, with basic cleaning only. This product is intended for further finishing into a transition duct. It is classified under tariff item 8411.99.00 as a part of gas turbines, as it has not been advanced beyond basic processing.
Cast Iron Turbine Casing End Cover
A rough cast iron end cover plate that seals the turbine casing on non-aircraft industrial gas turbines. It has basic cleanup machining only.
Cast Iron Turbine Casing for Civil Aircraft Gas Turbine
A rough-machined cast iron housing that encases the turbine blades and rotor in civil aircraft gas turbines. The housing is advanced only to cleaning and minimal machining for fin removal and location. It is a part of a gas turbine under tariff item 8411.99.00.
Cast Iron Turbine Frame Base Casting
> A rough base frame in cast iron for gas turbine mounting, minimally machined post-casting for sprue removal and fixturing. This product is in a basic state, suitable for further finishing into a turbine frame base. It falls under tariff item 8411.99.00 as a part of gas turbines, given its limited processing.
Cast Iron Turbine Frame Cross Brace
Rough cast iron cross bracing for the structural turbine frame in non-aircraft gas turbines. It has minimal machining for assembly purposes.
Cast Iron Turbine Inlet Scroll
A rough cast iron scroll-shaped volute that directs airflow into the turbine stage of stationary gas turbines. It is cleaned and minimally machined only for casting defect removal and assembly fixturing.
Cast Iron Turbine Nozzle Guide Vane Base
> A base casting for nozzle guide vanes in cast iron gas turbines, with fins removed and locator features only. This product is intended for further finishing into a nozzle guide vane base. It is classified under tariff item 8411.99.00 as a part of gas turbines, as it has not been advanced beyond basic processing.
Cast Iron Turbine Nozzle Support Ring
A rough cast iron ring that supports stationary turbine nozzle vanes in industrial gas turbines. It is cleaned with locator machining only.
Cast Iron Turbine Rotor Support Bracket
A rough-machined cast iron bracket that supports turbine rotor bearings in non-aircraft gas turbines for marine propulsion. It is limited to post-casting cleanup and fixturing holes.
Cast Iron Turbine Shaft Bearing Pedestal
A rough cast iron pedestal that houses turbine shaft bearings in power generation gas turbines. It is cleaned and machined minimally.
Cast Iron Turbojet Compressor Housing Rough Casting
> A rough cast-iron part for turbojet compressor sections, processed only by cleaning and minimal machining to eliminate sprues and permit fixturing. This product is in a basic state, suitable for further finishing into a compressor housing. It falls under tariff item 8411.99.00 as a part of gas turbines, given its limited processing.
Cast Iron Turbopropeller Inlet Duct Casting
> A basic cast-iron inlet duct blank for turbopropeller engines, with gates and risers removed and light machining for assembly location only. This product is intended for further finishing into an inlet duct. It is classified under tariff item 8411.99.00 as a part of gas turbines, as it has not been advanced beyond basic processing.
Cast Iron Volute Casing Rough Part
> A rough volute-shaped cast-iron casing for gas turbine pumps or compressors, limited to cleaning and gate removal machining. This product is in a basic state, suitable for further finishing into a volute casing. It falls under tariff item 8411.99.00 as a part of gas turbines, given its limited processing.