Other
Spark-ignition reciprocating or rotary internal combustion piston engines. > Other > Other
Duty Rate (from China)
Products classified under Tariff item 8409.99.00.90
Cast Iron Bedplate for Mack Truck Engine
A main bearing bedplate rough casting for a Mack MP8 engine in Class 8 tractors, machined only to remove sprues and for assembly jig location. It forms the base frame supporting the crankshaft in a diesel engine of heading 84.08. This unfinished part is classified under this tariff item as a part of a compression-ignition engine.
8409.99.00Cast Iron Crankcase for Ram 1500
A cast iron crankcase housing for a 5.7L HEMI V8 in a Ram 1500 pickup, in a rough state with only sprue removal machining. It is designed solely for principal use with automotive engines of headings 84.07 and 84.08. This unfinished part is classified under this tariff item as a part of an internal combustion engine.
8409.99.00Cast Iron Crankshaft Rough Casting for Marine Diesel Engine
A rough cast iron crankshaft blank for large marine diesel engines, cleaned and with gates and risers removed solely for finishing machine fixturing. No journal turning or balancing has been performed, making it an unfinished part of a compression-ignition engine. It is classified under this tariff item as a part of a diesel engine of heading 84.08.
8409.99.00Cast Iron Cylinder Head Blank for Diesel Engine
A rough cast iron cylinder head blank for diesel engines of heading 84.08, cleaned and minimally machined only to remove casting fins, gates, sprues, and risers for finishing placement. It has not undergone further machining such as porting or valve seat cutting. This unfinished part is classified under this tariff item as a part of a compression-ignition engine.
8409.99.00Cast Iron Cylinder Head for Ford F-150
A rough cast iron cylinder head for the 5.0L V8 engine in Ford F-150 trucks, machined only for removal of gates, sprues, and risers to enable finishing. It has not undergone further machining such as porting or valve seat cutting. This unfinished part is classified under this tariff item as a part of a spark-ignition engine.
8409.99.00Cast Iron Engine Block for Toyota Tacoma
A rough cast iron engine block specifically designed for the 2.7L inline-four engine in Toyota Tacoma pickup trucks, advanced only to cleaning and machining for fin removal to fit finishing fixtures. No cylinder boring or internal machining has been performed. This unfinished part is classified under this tariff item as a part of a spark-ignition engine.
8409.99.00Cast Iron Engine Block Rough Casting for Gasoline Engine
A rough cast iron engine block suitable principally for spark-ignition engines of heading 84.07, processed only by cleaning and machining to remove sprues, gates, and fins for locator purposes in finishing machinery. No internal machining or cylinder boring has been performed. This unfinished part is classified under this tariff item as a part of a spark-ignition engine.
8409.99.00Cast Iron Exhaust Manifold Blank for Automotive Engine
A rough cast iron exhaust manifold blank suitable for automotive engines of headings 84.07 and 84.08, with minimal machining only for sprue removal and finishing alignment. No port shaping or flange drilling has been performed. This unfinished part is classified under this tariff item as a part of an internal combustion engine.
8409.99.00Cast Iron Exhaust Manifold for Nissan Titan
A rough cast iron exhaust manifold for the 5.6L V8 Endurance engine in Nissan Titan trucks, limited to cleaning and fin machining for finishing jigs. No port shaping or flange drilling has been performed. This unfinished part is classified under this tariff item as a part of a spark-ignition engine.
8409.99.00Cast Iron Flywheel Rough Casting for Diesel Generator Engine
A basic cast iron flywheel blank for stationary diesel generator engines of heading 84.08, machined solely to remove casting defects and permit finishing location. No ring gear pockets or starter teeth have been added. This unfinished part is classified under this tariff item as a part of a compression-ignition engine.
8409.99.00Cast Iron Intake Manifold Blank for Tractor Engine
A rough cast iron intake manifold casting for agricultural tractor engines of heading 84.08, with fins and sprues removed only for basic finishing setup. No runner shaping has been performed. This unfinished part is classified under this tariff item as a part of a compression-ignition engine.
8409.99.00Cast Iron Oil Pan Rough Casting for Truck Engine
An unfinished cast iron oil sump pan for heavy truck engines of heading 84.08, cleaned with fins and risers machined off only for locator purposes. No drain plug bosses or gasket surface finishing has been performed. This unfinished part is classified under this tariff item as a part of a compression-ignition engine.
8409.99.00Cast Iron Piston Blank for Compression-Ignition Engine
An unfinished cast iron piston blank designed for diesel engines under heading 84.08, with only cleaning and removal of risers and gates for finishing machinery location. It lacks piston ring grooves or crown finishing. This unfinished part is classified under this tariff item as a part of a compression-ignition engine.
8409.99.00Cast Iron Timing Gear Blank for Spark-Ignition Engine
An unfinished cast iron gear blank for engine timing chain or belt systems in spark-ignition engines of heading 84.07, cleaned and minimally machined for risers only. No tooth profiling has been performed. This unfinished part is classified under this tariff item as a part of a spark-ignition engine.
8409.99.00Cast Iron Valve Body Blank for Engine Cylinder Head
A rough cast iron body for intake or exhaust valves in engines of headings 84.07 and 84.08, with only basic cleaning and gate removal for finishing. No stem or seat machining has been performed. This unfinished part is classified under this tariff item as a part of an internal combustion engine.