Unalloyed Tin Bar
Solid rectangular bar made from unalloyed tin containing at least 99% tin by weight, with bismuth and copper below specified limits. It is used in soldering and metal casting applications and meets the definition of bars in the chapter notes.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the bar is in an unwrought state
Unwrought tin is classified under heading 8001, while bars are under 8003.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the tin purity and that bismuth and copper are below the limits
• Provide a certificate of analysis
• Declare as 'tin bars' and not as unwrought tin
Related Products under Tariff item 8003.00.00
High Purity Tin Wire 24 AWG
High purity tin wire, 24 AWG, made from 99.99% unalloyed tin, used in semiconductor applications. It meets the subheading note definition of tin, not alloyed, with bismuth and copper below the specified limits.
Pure Tin Welding Rod
Straight rods of unalloyed tin used for specialized tin welding applications. They meet the definition of tin rods under the chapter notes, with a uniform solid cross-section and tin content of at least 99%.
Tin Angle Profile
L-shaped angle profile extruded from unalloyed tin, used for marine hardware bases. It conforms to the definition of profiles in the chapter notes, having a uniform cross-section that is not a bar, rod, wire, plate, sheet, strip, foil, tube, or pipe.
Tin Flat Bar 1x4 Inch
Rectangular flat bar of pure tin, 1 inch thick by 4 inches wide, for laboratory equipment. It meets the definition of bars in the chapter notes, with a thickness exceeding one-tenth of the width and a uniform solid cross-section.
Tin Hollow Profile Tube
Thin-walled hollow profile tubing extruded from pure tin for fluid transfer components. It is classified as a profile under the chapter notes because it does not meet the definition of tubes or pipes, which require a uniform wall thickness and concentric cross-sections.
Tin Profile Channel Section
Extruded U-channel profile made from unalloyed tin for corrosion-resistant framing. It fits the definition of profiles in the chapter notes, with a uniform cross-section that is not a bar, rod, wire, plate, sheet, strip, foil, tube, or pipe.