Tin bars, rods, profiles and wire.
Unwrought tin. > Tin bars, rods, profiles and wire. > Tin bars, rods, profiles and wire.
Duty Rate (from China)
Products classified under Tariff item 8003.00.00.00
High Purity Tin Wire 24 AWG
High purity tin wire, 24 AWG, made from 99.99% unalloyed tin, used in semiconductor applications. It meets the subheading note definition of tin, not alloyed, with bismuth and copper below the specified limits.
8003.00.00Pure Tin Welding Rod
Straight rods of unalloyed tin used for specialized tin welding applications. They meet the definition of tin rods under the chapter notes, with a uniform solid cross-section and tin content of at least 99%.
8003.00.00Tin Angle Profile
L-shaped angle profile extruded from unalloyed tin, used for marine hardware bases. It conforms to the definition of profiles in the chapter notes, having a uniform cross-section that is not a bar, rod, wire, plate, sheet, strip, foil, tube, or pipe.
8003.00.00Tin Flat Bar 1x4 Inch
Rectangular flat bar of pure tin, 1 inch thick by 4 inches wide, for laboratory equipment. It meets the definition of bars in the chapter notes, with a thickness exceeding one-tenth of the width and a uniform solid cross-section.
8003.00.00Tin Hollow Profile Tube
Thin-walled hollow profile tubing extruded from pure tin for fluid transfer components. It is classified as a profile under the chapter notes because it does not meet the definition of tubes or pipes, which require a uniform wall thickness and concentric cross-sections.
8003.00.00Tin Profile Channel Section
Extruded U-channel profile made from unalloyed tin for corrosion-resistant framing. It fits the definition of profiles in the chapter notes, with a uniform cross-section that is not a bar, rod, wire, plate, sheet, strip, foil, tube, or pipe.
8003.00.00Tin Profile for Soldering
Extruded tin profile in L-shaped cross-section used as base material for solder alloys. It complies with the unalloyed tin definition in the subheading note, with bismuth and copper below the specified limits.
8003.00.00Tin Rod 1/4 Inch Diameter
Cylindrical rod of unalloyed tin with a 0.25-inch diameter, suitable for machining into components. It meets the chapter note definition of bars and rods, with a uniform solid cross-section and tin content of at least 99%.
8003.00.00Tin Round Bar 2 Inch Diameter
Cast and rolled round bar of unalloyed tin, 2 inches in diameter, for chemical apparatus fabrication. It meets the tin bar criteria in the chapter notes, with a uniform solid cross-section and tin content of at least 99%.
8003.00.00Tin Solder Bar (Unalloyed Base)
High-purity tin bar used as a base for custom solder alloys in electronics manufacturing. It is unalloyed per the subheading note, with bismuth and copper below the specified limits.
8003.00.00Tin Square Rod 1/2 Inch
Square cross-section rod of unalloyed tin, 0.5 inch per side, for specialty casting. It fits the definition of rods in the chapter notes, with a uniform solid cross-section and tin content of at least 99%.
8003.00.00Tin Wire Spool 30 Gauge
Ultra-fine 30 AWG unalloyed tin wire on a plastic spool for precision electronics. It meets the definition of wire in the chapter notes, being in coils with a uniform solid cross-section and tin content of at least 99%.
8003.00.00Unalloyed Tin Bar
Solid rectangular bar made from unalloyed tin containing at least 99% tin by weight, with bismuth and copper below specified limits. It is used in soldering and metal casting applications and meets the definition of bars in the chapter notes.
8003.00.00Unalloyed Tin Extruded Rod
Continuously extruded rod of high-purity tin for further drawing into wire. It meets the chapter note definition of rods, with a uniform solid cross-section and tin content of at least 99%.
8003.00.00Unalloyed Tin Wire 18 AWG
Fine drawn wire of pure unalloyed tin in 18 AWG gauge for electronics prototyping. It meets the purity requirements in the subheading note, with bismuth and copper below the specified limits, and is classified as tin wire.