Tin-Lead Solder Alloy Ingot
Unwrought ingot composed primarily of tin with lead as the secondary element, used for soldering applications in electronics and plumbing. Tin predominates by weight over lead, and the alloy meets the definition of a tin alloy. It is classified under tariff item 8001.20.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the ingot is processed into flux-coated solder wire or bars
Prepared solders with flux are classified in Chapter 83.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the tin content exceeds 50% by weight and the total alloying elements exceed 1%
• Provide a certificate of analysis for CBSA
• Declare as unwrought tin alloy, not as prepared solder of heading 8311
Related Products under Tariff item 8001.20.00
Electronics-Grade Tin Solder Pig (0.5% Lead)
High-purity unwrought tin alloy pigs with 0.5% lead for wave soldering in circuit boards. Tin predominates by weight, and the total alloying elements exceed 1%, meeting the tin alloy definition. These pigs are classified under tariff item 8001.20.00.
Low-Lead Tin Babbitt Alloy Bars (2% Lead)
Unwrought bars of tin-based babbitt alloy with 2% lead, 10% antimony, and balance tin, used for bearings after casting. Tin predominates by weight, and the total alloying elements exceed 1%, qualifying as a tin alloy. These are classified under tariff item 8001.20.00.
Organ Pipe Tin Alloy Blocks
Unwrought blocks of tin-lead alloy, with tin predominating by weight over lead and other elements. These blocks are cast for subsequent melting and pouring into organ pipes, and the alloy composition is adjusted for acoustic properties. They are classified as unwrought tin alloys under tariff item 8001.20.00.
Pewter Master Alloy Ingots
Unwrought ingots of pewter master alloy, where tin is the predominant metal by weight, with antimony and copper as alloying elements exceeding 1% total. These ingots are used as a base for melting and casting decorative pewter items. They are classified as unwrought tin alloys under tariff item 8001.20.00.
Tin-10% Lead Solder Alloy Ingot
Unwrought tin alloy ingot containing 88% tin and 10% lead by weight, used primarily for manufacturing solder in electronics assembly. Tin predominates by weight, and the total alloying elements exceed 1%, qualifying as a tin alloy. It is classified under tariff item 8001.20.00.
Tin-12% Lead Cable Sheathing Alloy
Unwrought tin alloy pigs or anodes containing 12% lead for extrusion into protective cable sheathing in power transmission. Tin is the base metal, and the total alloying elements exceed 1%, meeting the tin alloy definition. These are classified under tariff item 8001.20.00.