Leaded Tin Type Metal Pigs
Unwrought stereotype metal pigs of tin-based alloy with more than 25% lead, used for printing press type casting. Tin predominates by weight, classifying them as tin alloys under tariff item 8001.20.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the pigs are cast into finished printing type
Finished tin articles are classified under heading 80.07.
If the pigs are part of printing machinery
Printing plates and cylinders are classified in Chapter 84.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Document the alloy composition showing tin predominance and lead content
• Confirm the pigs are unwrought and not cast into finished type
• Note that printing industry use may be subject to specific occupational safety regulations
Related Products under Tariff item 8001.20.00
Electronics-Grade Tin Solder Pig (0.5% Lead)
High-purity unwrought tin alloy pigs with 0.5% lead for wave soldering in circuit boards. Tin predominates by weight, and the total alloying elements exceed 1%, meeting the tin alloy definition. These pigs are classified under tariff item 8001.20.00.
High-Lead Tin Babbitt Metal Bar
An unwrought tin-based Babbitt alloy bar containing more than 25% lead, designed for bearing and machinery lubrication surfaces. Tin predominates by weight, classifying it as a tin alloy under tariff item 8001.20.00 despite the high lead content.
High-Lead Tin Cable Sheathing Billets
Unwrought tin-lead alloy billets containing more than 25% lead, used for extruding protective sheathing on undersea power cables. Tin predominates by weight, classifying them as tin alloys under tariff item 8001.20.00.
Leaded Tin Anode Bar
Unwrought tin alloy bars with over 25% lead, designed as sacrificial anodes for electroplating and corrosion protection in industrial tanks. Tin predominates by weight, classifying them as tin alloys under tariff item 8001.20.00.
Low-Lead Tin Babbitt Alloy Bars (2% Lead)
Unwrought bars of tin-based babbitt alloy with 2% lead, 10% antimony, and balance tin, used for bearings after casting. Tin predominates by weight, and the total alloying elements exceed 1%, qualifying as a tin alloy. These are classified under tariff item 8001.20.00.
Organ Pipe Tin Alloy Blocks
Unwrought blocks of tin-lead alloy, with tin predominating by weight over lead and other elements. These blocks are cast for subsequent melting and pouring into organ pipes, and the alloy composition is adjusted for acoustic properties. They are classified as unwrought tin alloys under tariff item 8001.20.00.