Of aluminum alloys
Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm. > Other: > Of aluminum alloys > Of aluminum alloys
Duty Rate (from China)
Products classified under Tariff item 7606.9
1050 Aluminum Sheet 1mm Thick
A rectangular sheet made from 1050 aluminum alloy, which is 99.5% pure aluminum, with a thickness of 1mm exceeding 0.2mm. It is not clad and used for general fabrication and signage.
7606.91.001050 Aluminum Sheet 3mm Thick
A rectangular sheet of unalloyed 1050 aluminum with 99.5% purity and thickness of 3 mm, used for general fabrication. It is not clad, rectangular, exceeds 0.2 mm, and meets the unalloyed definition.
7606.91.001050 Aluminum Treadplate Lite 1.5mm
A 1.5mm 1050 unalloyed aluminum sheet with a light embossed tread pattern for walkways. Imported flat-rolled, not clad, and the embossing does not change its classification as a flat sheet.
7606.91.001050 Fin Stock Sheet 0.5mm
A thin 1050 sheet 0.5 mm for heat exchanger fins. It is a flat-rolled product of unalloyed aluminum, not clad, and meets the unalloyed purity requirements.
7606.91.001050 H14 Aluminum Sheet 4.5mm
A tempered H14 1050 aluminum sheet 4.5 mm thick for trailer skins. It is non-alloyed, flat-rolled, and not clad, meeting the unalloyed definition.
7606.91.001060 Aluminum Flat Sheet 5mm Thick
A commercial pure 1060 aluminum flat sheet, 5 mm thick for signage and cladding. It is non-alloyed per subheading note 1(a), not clad, and exceeds 0.2 mm in thickness.
7606.91.001060 Aluminum Sheet for Signage 2mm
A 2mm thick 1060 unalloyed aluminum sheet (99.6% Al) used for outdoor signage panels. Flat, not clad, and cut to size.
7606.91.001070 Aluminum Anodizing Stock 1mm
A 1mm thick 1070 unalloyed aluminum sheet prepared for anodizing processes, used in architectural panels. Not clad.
7606.91.001070 Lighting Reflector Sheet 2.8mm
A reflective sheet for lighting fixtures, made of 1070 unalloyed aluminum at 2.8 mm thickness. It is a flat-rolled product, not clad, and meets the unalloyed purity requirements.
7606.91.001070 Mirror Finish Sheet 1mm
A polished mirror finish 1070 sheet 1 mm for decorative reflectors. It is still a basic rolled sheet, non-alloyed, with no further working beyond polishing.
7606.91.001070 Pure Aluminum Sheet 2.5mm
A high-purity 1070 aluminum sheet at 2.5 mm thickness, used in electronics reflectors. It meets the unalloyed definition with at least 99.7% aluminum, is rectangular, rolled, unclad, and exceeds 0.2 mm.
7606.91.001070 Unalloyed Aluminum Strip 0.5mm
A narrow strip of 1070 pure aluminum (99.7% Al), 0.5mm thick, in coils for transformer winding. Not clad, with a rectangular cross-section.
7606.91.001100 Aluminum Plate 3mm Thick
A flat plate of 1100 grade unalloyed aluminum, 99.0% minimum purity, 3mm thick for industrial machining. Not clad, suitable for cookware bases and reflectors.
7606.91.001100 Aluminum Plate 4mm Thick
An unclad 1100 grade aluminum plate, 4 mm thick, with high purity for corrosion-resistant applications like chemical tanks. It is classified under 7606.91.00 due to its non-alloyed composition and plate form.
7606.91.001100 Battery Sheet 4mm
A 4 mm thick sheet of 1100 aluminum, which is commercially pure (at least 99% aluminum) and therefore not alloyed. It is used for battery casings and meets the tariff item's definition of aluminum, not alloyed, in plate, sheet or strip form exceeding 0.2 mm in thickness.
7606.91.001100 O Temper Sheet 2mm Thick
An annealed (O temper) 1100 aluminum sheet, 2 mm thick, used for soft forming applications. The 1100 grade is at least 99% aluminum, making it non-alloyed, and the sheet's thickness exceeds 0.2 mm, fitting the tariff item's scope.
7606.91.001145 Aluminum Sheet 1.5mm Thick
A 1.5 mm thick sheet of 1145 aluminum, a non-alloyed grade with at least 99% aluminum, used as fin stock in heat exchangers. The rectangular sheet exceeds 0.2 mm in thickness and is not clad, meeting the tariff item's requirements for non-alloyed aluminum plates and sheets.
7606.91.001145 Unalloyed Aluminum Plate 5mm
A heavy 5mm 1145 aluminum plate, unalloyed with high purity, for heat exchangers. Not clad, rectangular form.
7606.91.003003 Aluminum Sheet 3mm - Wait, Non-Alloy Only
A 6 mm thick sheet of 99% pure aluminum for architectural panels, meeting strict non-alloyed specifications. The sheet is rolled, unclad, and exceeds 0.2 mm in thickness, fitting the tariff item for non-alloyed aluminum plates and sheets.
7606.91.003003 Wait - No, 1235 Pure Aluminum Sheet
A 1235 grade unalloyed aluminum sheet, 99.35% Al, 1.5mm thick for lithographic printing plates. Unclad flat product.
7606.91.0099.5% Pure Aluminum Plate 10mm Thick
A rectangular plate made from unalloyed aluminum containing at least 99% aluminum by weight, with a uniform thickness of 10 mm, exceeding 0.2 mm overall. It is not clad and meets the purity requirements for unalloyed aluminum under subheading note 1(a).
7606.91.00Annealed Unalloyed Aluminum Sheet 6.5mm
An annealed 6.5 mm thick sheet of pure unalloyed aluminum, not clad, for bending into reflectors. The annealing process does not change its classification as a flat-rolled product of heading 7606.
7606.91.00Battery Grade Aluminum Sheet 0.3mm
A high-purity 1070 aluminum sheet 0.3mm thick for lithium battery current collectors. Flat rolled, not clad.
7606.91.00Clad Aluminum Architectural Cladding Sheet
A clad aluminum sheet for architectural cladding, with a decorative or functional cladding layer over a non-alloyed aluminum base, exceeding 0.2 mm in thickness. Clad products are still classified as plates/sheets of aluminum, and the non-alloyed base determines the subheading.
7606.91.00Clad Aluminum Battery Tray Sheet
A clad aluminum sheet for EV battery trays, with corrosion protection cladding over a non-alloyed aluminum base, exceeding 0.2 mm in thickness. The product is a plate/sheet of non-alloyed aluminum, and the cladding does not alter its classification.
7606.91.00Clad Aluminum Brazing Sheet for Condensers
A clad aluminum brazing sheet for condensers, with a brazing alloy cladding over a non-alloyed aluminum base, exceeding 0.2 mm in thickness. The product is designed for HVAC condensers and is classified as a plate/sheet of non-alloyed aluminum, with the cladding not affecting the tariff item.
7606.91.00Cookware Grade Aluminum Sheet 4mm
A 4mm thick unalloyed 1050/1100 aluminum disks/sheets for cookware bottoms. Not clad, pre-cut circles, remains as material, not finished article.
7606.91.00High-Purity Aluminum Block Plate 15mm
A 15 mm thick block-style plate from 99.99% unalloyed aluminum, cut to size for semiconductor wafer processing bases. It is a flat-rolled product of heading 7606, not further worked beyond cutting to size.
7606.91.00High Purity Aluminum Sheet 2.5mm
A 99.99% pure aluminum sheet (4N grade) 2.5mm thick for semiconductor processing equipment bases. Not alloyed, not clad.
7606.91.00Industrial Grade Aluminum Plate 9mm Thick
A 9 mm thick industrial plate of non-alloyed aluminum (99.0% min), unclad for fabrication into machinery bases. It meets the unalloyed definition with Fe+Si not exceeding 1% and other elements within limits.
7606.91.00Non-Alloyed Al Treadplate 5.5mm
A 5.5 mm thick treadplate made of 1050 aluminum, a non-alloyed grade with at least 99% aluminum, featuring a raised pattern for flooring. Despite the pattern, it remains a plate/sheet of non-alloyed aluminum exceeding 0.2 mm in thickness, and the pattern does not change its classification.
7606.91.00Non-Alloyed Aluminum Strip 7mm Thick
A continuous strip of unalloyed aluminum, 7 mm thick and 1 meter wide, used in roll-forming applications. It is a flat-rolled product of heading 7606, not clad, and meets the unalloyed purity requirements.
7606.91.00Pure Al Nameplate Sheet 1.2mm
A 1.2 mm thick sheet of pure aluminum intended for engraving nameplates. The sheet is non-alloyed, exceeding 0.2 mm in thickness, and is in the form of a plate/sheet, fitting the tariff item's description.
7606.91.00Pure Al Roofing Sheet 3.2mm
A 3.2 mm thick corrugated sheet of pure aluminum for roofing, rolled into a corrugated form. The sheet is non-alloyed and exceeds 0.2 mm in thickness; corrugation is a pattern that does not remove it from the plate/sheet definition.
7606.91.00Pure Aluminum Roofing Sheet 0.8mm
A 0.8mm thick corrugated pure aluminum sheet (1050/1060) for roofing, flat-rolled before corrugation but imported flat. Not clad, unalloyed.
7606.91.00Pure Aluminum Thick Plate 12mm for Heat Sinks
A 12 mm thick plate of 99.7% pure unalloyed aluminum, designed as base stock for machining large heat sinks in electronics cooling. It is a flat-rolled product of heading 7606, not clad, and meets the unalloyed definition.
7606.91.00Unalloyed Aluminum Flashing Strip 0.4mm
A 0.4mm thick 1060 aluminum strip for building flashing and trim. Continuous strip, not clad.
7606.91.00Unalloyed Aluminum Nameplate Blank 1.2mm
A 1.2mm thick rectangular blanks of unalloyed 1100 aluminum for engraving nameplates. Not clad, unfinished sheet form.
7606.91.00Unalloyed Aluminum Partition Sheet 0.6mm
A 0.6mm 1100 aluminum sheets for room partitions and dividers. Flat, unpainted, not clad.
7606.91.00Unclad Aluminum Sheet 8mm Thick for Tooling
A high-purity unclad aluminum sheet, 8 mm thick, composed of non-alloyed aluminum for precision tooling and jig-making. It is a flat-rolled product of heading 7606, not clad, and meets the unalloyed purity requirements.
7606.92.001100-H14 Aluminum Alloy Sheet 0.8mm Thick
Near-pure 1100-H14 aluminum alloy sheet at 0.8mm thickness for reflectors and packaging. Although low alloy, it exceeds non-alloy limits, qualifying as an aluminum alloy sheet under this tariff item.
7606.92.002024-T351 Aluminum Alloy Machining Plate
High-strength 2024-T351 aluminum alloy plate, exceeding 6.3 mm in thickness, used for CNC machining into truck parts. The copper alloying elements classify it as an aluminum alloy, and the unclad rectangular form falls under this tariff item.
7606.92.002024-T3 Aluminum Alloy Sheet 1.6mm Thick
2024-T3 aluminum alloy sheet, 1.6mm thick, for fuselage skins in aviation. The copper alloying makes it an aluminum alloy, and the unclad form fits this tariff item.
7606.92.003003-H14 Aluminum Alloy Sheet 2.5mm Thick
3003-H14 aluminum alloy sheet, 2.5mm thick, commonly used for cookware and chemical tanks. The manganese alloying classifies it as an aluminum alloy, and the unclad rectangular form falls under this item.
7606.92.005052-H32 Aluminum Alloy Plate 5mm Thick
Marine-grade 5052-H32 aluminum alloy plate, 5mm thick, used for boat hulls and tanks. The magnesium content defines it as an alloy, and the unclad form fits this tariff item.
7606.92.005083-H116 Aluminum Alloy Marine Plate
High-strength 5083-H116 aluminum alloy plate over 6.3 mm thick, corrosion-resistant for shipbuilding and offshore platforms. The magnesium content exceeds 4%, classifying it as an alloy, and the unclad rectangular form falls under this item.
7606.92.005083-H116 Aluminum Alloy Plate 6mm Thick
5083-H116 marine-grade aluminum alloy plate at 6mm thickness for shipbuilding and offshore platforms. The magnesium content exceeds 4%, classifying it as an alloy, and the unclad form falls under this item.
7606.92.005086-H32 Aluminum Alloy Sheet 3.5mm Thick
A flat-rolled aluminum alloy sheet in 5086-H32 temper, 3.5 mm thick, exceeding 0.2 mm. This unclad product is used in truck trailers and cryogenic applications due to its superior strength-to-weight ratio. It is classified under tariff item 7606.92.00 as an aluminum alloy plate, sheet or strip.
7606.92.005456-H321 Aluminum Alloy Shipbuilding Plate
5456-H321 weldable alloy plate exceeding 6.3 mm for hull plating in marine vessels. The magnesium and chromium composition exceeds pure aluminum limits, classifying it as an alloy, and the unclad form fits this item.
7606.92.005754-H111 Aluminum Alloy Plate 5.5mm Thick
A flat-rolled aluminum alloy plate in 5754-H111 temper, 5.5 mm thick, exceeding 0.2 mm. This unclad product is used in pressure vessels and automotive panels, with magnesium alloying for weldability. It is classified under tariff item 7606.92.00 as an aluminum alloy plate, sheet or strip.
7606.92.005754-H111 Aluminum Alloy Tanker Plate
5754-H111 corrosion-resistant alloy plate over 6.3 mm for fuel tanker bodies. The magnesium alloying makes it an aluminum alloy, and the unclad rectangular form falls under this tariff item.
7606.92.006061-T6 Aluminum Alloy Plate
A rectangular plate made from 6061-T6 aluminum alloy, with a thickness exceeding 6.3 mm, used in structural applications like aircraft components and machinery bases. It is an unclad alloy plate, fitting this tariff item.
7606.92.006061-T6 Aluminum Alloy Sheet 3mm Thick
A rectangular sheet made from 6061-T6 aluminum alloy, 3 mm thick, exceeding 0.2 mm. This unclad product is ideal for structural applications due to its strength and corrosion resistance. It is classified under tariff item 7606.92.00 as an aluminum alloy plate, sheet or strip.
7606.92.006063-T6 Aluminum Alloy Plate 4mm Thick
A flat-rolled aluminum alloy plate in 6063-T6 temper, 4 mm thick, exceeding 0.2 mm. This unclad product is used for architectural panels and frames, offering good extrusion and finishing qualities. It is classified under tariff item 7606.92.00 as an aluminum alloy plate, sheet or strip.
7606.92.006063-T6 Extrusion-Grade Aluminum Alloy Plate
6063-T6 aluminum alloy plate over 6.3 mm thick, often rolled for architectural frames and extrusion billets. The silicon and magnesium content defines it as an alloy, and the unclad form fits this item.
7606.92.006082-T6 Aluminum Alloy Bridge Plate
6082-T6 structural alloy plate exceeding 6.3 mm for bridge decking and girders. The silicon and manganese content classifies it as an aluminum alloy, and the unclad rectangular form falls under this item.
7606.92.007005-T53 Aluminum Alloy Trailer Plate
7005-T53 weldable alloy plate >6.3 mm thick for semi-trailer flooring. The zinc and magnesium content defines it as an aluminum alloy, and the unclad form fits this tariff item.
7606.92.007075-T651 Aluminum Alloy Aerospace Plate
Ultra-high-strength 7075-T651 alloy plate thicker than 6.3 mm for aircraft wing skins and fuselage parts. The zinc and copper contents define it as an aluminum alloy, and the unclad form falls under this item.
7606.92.007075-T651 Aluminum Alloy Sheet 4.5mm Thick
A high-strength aluminum alloy sheet in 7075-T651 temper, 4.5 mm thick, exceeding 0.2 mm. This unclad product is used in aircraft wings and frames due to its superior tensile strength from zinc alloying. It is classified under tariff item 7606.92.00 as an aluminum alloy plate, sheet or strip.
7606.92.00Aluminum 5052-H32 Alloy Pressure Vessel Plate
5052-H32 aluminum alloy plate, thicker than 6.3 mm, used for fabricating chemical tanks and pressure vessels. The magnesium content defines it as an alloy, and the unclad rectangular form fits this tariff item.