1070 Aluminum Anodizing Stock 1mm
A 1 mm thick sheet of 1070 unalloyed aluminum, prepared for anodizing processes and used in architectural panels. It is not clad and meets the purity requirements for unalloyed aluminum.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the stock is an aluminum alloy.
Alloy anodizing stock is classified under a different item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the aluminum purity (≥99% Al) and that the sheet is unclad
• The product should be declared as a plate or sheet, not as an article
• Use code 7606.91.00 for clearance
Related Products under Tariff item 7606.91.00
1050 Aluminum Sheet 1mm Thick
A flat-rolled rectangular sheet of 1050 aluminum alloy, which contains at least 99% aluminum by weight. The sheet is 1 mm thick, exceeding 0.2 mm, and is not clad, making it suitable for general fabrication and signage.
1050 Aluminum Treadplate Lite 1.5mm
A 1.5 mm thick sheet of 1050 unalloyed aluminum with a light embossed tread pattern for walkways. It is flat-rolled, not clad, and the embossing does not change its classification as a plate or sheet.
1060 Aluminum Sheet for Signage 2mm
A 2 mm thick sheet of 1060 unalloyed aluminum, with a purity of 99.6%, used for outdoor signage panels. It is flat, not clad, and cut to size, fitting the definition of an unalloyed aluminum plate or sheet.
1070 Unalloyed Aluminum Strip 0.5mm
A narrow strip of 1070 unalloyed aluminum, 0.5 mm thick, in coils for transformer winding. It has a rectangular cross-section, is not clad, and meets the definition of strip in the chapter.
1100 Aluminum Plate 3mm Thick
A flat plate of 1100 grade unalloyed aluminum, with a minimum purity of 99.0%, 3 mm thick for industrial machining. It is not clad and suitable for cookware bases and reflectors.
1145 Unalloyed Aluminum Plate 5mm
A heavy 5 mm plate of 1145 unalloyed aluminum, with high purity for heat exchangers. It is not clad and has a rectangular form, fitting the definition of an unalloyed aluminum plate.