Pure Aluminum Round Rod 3/8 Inch for Machining
A 3/8-inch diameter unalloyed aluminum rod with a round cross-section, designed for CNC machining into fittings. The aluminum content exceeds 99% and other elements are within the limits of Chapter 76 subheading note (a), making it a non-alloyed aluminum bar or rod.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the rod contains alloying elements above the non-alloyed limits
Aluminum alloys are classified separately under the subheading for alloyed bars, rods, and profiles.
If the product is a flat sheet or plate instead of a round rod
Flat products with a thickness not exceeding one-tenth of the width are classified under heading 7606.
If the rod is machined into finished fittings before import
Finished articles of aluminum are classified under heading 7616.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• For CNC machining stock, ensure the rod is supplied in straight lengths and not in coils to qualify as a bar or rod
• Provide a certificate of analysis to the CBSA showing the aluminum purity and impurity limits
• If the rod is imported with threads or other working, it may be classified as an article rather than a bar
Related Products under Tariff item 7604.10.00
99.5% Pure Aluminum Round Rod 1/4 Inch Diameter
A straight round rod made from unalloyed aluminum containing at least 99% aluminum by weight, with iron plus silicon content under 0.1%. It has a uniform circular cross-section and is used in manufacturing and construction. It is classified under 7604.10.00 as an unalloyed aluminum bar or rod.
99.7% Aluminum Round Bar 9/16 Inch
A high-purity 99.7% unalloyed aluminum round bar, 9/16-inch diameter, for laboratory equipment. The aluminum content is at least 99% by weight, with impurities within Chapter 76 limits. It has a uniform circular cross-section, qualifying as a bar under Section XV note 9(a).
Aluminum 1100 Series Round Stock 5/8 Inch
A Series 1100 unalloyed aluminum round bar with a 5/8-inch cross-section, commercially pure for general fabrication. It conforms to the limits for Fe+Si and other elements in Chapter 76 subheading note 1(a). It has a uniform circular cross-section, qualifying as a bar under Section XV note 9(a).
Aluminum Round Rod 11/16 Inch Non-Alloyed
An 11/16-inch diameter non-alloyed aluminum round rod for automotive prototypes. The elemental composition is strictly within the limits for unalloyed aluminum in Chapter 76 subheading note 1(a). It has a uniform circular cross-section, qualifying as a rod under Section XV note 9(a).
Commercial Pure Aluminum Rod 3/4 Inch Round
A commercial purity unalloyed aluminum rod, 3/4-inch round, for electrical contacts and reflectors. It adheres to the elemental limits for unalloyed aluminum in Chapter 76 subheading note 1(a). It has a uniform circular cross-section, qualifying as a rod under Section XV note 9(a).
Non-Alloyed Aluminum Round Bar 1 Inch Diameter
A 1-inch diameter round bar of unalloyed aluminum, with a purity of at least 99% and impurities within the limits set by Chapter 76 subheading note (a). It is used for structural supports and prototyping, and its uniform solid cross-section qualifies it as a bar under Section XV note 9(a).