Nickel 200 Alloy Plate
Nickel 200 alloy plates, with 99.2% nickel and copper alloying, heavy plates for food processing tanks. While Nickel 200 is nearly pure, it is considered a nickel alloy if the copper content exceeds the limit for unalloyed nickel (0.3% for other elements). As a nickel alloy, it is classified under 7506.20.90 as 'other' nickel alloy plates, not meeting the foil criteria of subheading 7506.20.10.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the copper content is below 0.3% and other elements are within limits
If the product meets the definition of nickel, not alloyed, it would be classified under this subheading.
If the plates are foil under 0.15 mm thick and nickel content is below 60%
This subheading covers specific nickel alloy foil, which could apply if the product's dimensions and composition match.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the exact nickel and copper content, as Nickel 200 may be classified as unalloyed nickel if copper is below 0.3%
• Provide a certificate of analysis to support the alloy classification
• Ensure the plates are not cold-formed, as that could affect the tariff item
Related Products under Tariff item 7506.20.90
Alloy 20 Nickel Strip
Alloy 20 (UNS N08020) nickel-iron-chromium strip, hot-rolled and not cold-formed, in wide format. This product is a nickel alloy under Section XV Note 5, as nickel predominates by weight. It is classified under tariff item 7506.20.90 as 'other' nickel alloy plates, sheets, strip and foil, since it does not meet the specific foil thickness or nickel content criteria of subheading 7506.20.10.
Carpenter 20Cb-3 Strip
Carpenter 20Cb-3 strip, a nickel-based alloy with approximately 35% nickel, hot-rolled and not cold-formed, used in chemical pumps. As a nickel alloy where nickel predominates by weight, it falls under Chapter 75. It is classified under 7506.20.90 as 'other' nickel alloy strip, not meeting the foil thickness or nickel content thresholds of subheading 7506.20.10.
Hastelloy C-276 Nickel Alloy Foil
Hastelloy C-276 nickel alloy foil, ultra-thin (under 0.15 mm), hot-rolled and not cold-formed, for chemical processing gaskets and linings. This nickel alloy foil does not meet the specific criteria of subheading 7506.20.10 (which requires less than 60% nickel for unworked foil), as Hastelloy C-276 has a higher nickel content. Therefore, it is classified under 7506.20.90 as 'other' nickel alloy foil.
Incoloy 825 Nickel Alloy Sheet
Incoloy 825 nickel-iron-chromium alloy sheet, hot-rolled and not cold-formed, for sour gas service in oil and gas applications. As a nickel alloy where nickel predominates by weight, it is classified under Chapter 75. It falls under 7506.20.90 as 'other' nickel alloy sheet, as it does not meet the foil thickness criteria of subheading 7506.20.10.
Inconel 625 Nickel Alloy Sheet
Inconel 625 nickel-chromium-molybdenum alloy sheet, hot-rolled and not cold-formed, used in aerospace and chemical processing for corrosion resistance. This nickel alloy sheet is classified under 7506.20.90 as 'other' nickel alloy sheet, as it does not meet the foil thickness or nickel content criteria of subheading 7506.20.10. The nickel content typically exceeds 58%, making it a nickel alloy.
Monel 400 Nickel Alloy Plate
Monel 400 nickel-copper alloy plates, hot-rolled for marine and oil & gas applications due to seawater resistance. As a nickel alloy where nickel predominates by weight (typically 63% nickel), it is classified under Chapter 75. It falls under 7506.20.90 as 'other' nickel alloy plates, as it does not meet the foil thickness criteria of subheading 7506.20.10.