Worked foil of a thickness not exceeding 0.15 mm
Nickel plates, sheets, strip and foil. > Of nickel, not alloyed > Worked foil of a thickness not exceeding 0.15 mm > Worked foil of a thickness not exceeding 0.15 mm
Duty Rate (from China)
Products classified under Tariff item 7506.10.10
Cold-Formed Nickel Foil for Battery Anodes
Cold-formed nickel foil for battery anodes, processed to precise thicknesses below 0.15 mm and used as anode current collectors in lithium-ion batteries. The cold-forming process imparts specific mechanical properties, and the product is classified under tariff item 7506.10.10 as worked foil of non-alloyed nickel.
Cold-Formed Nickel Foil for Catalyst Supports
Perforated cold-formed nickel foil used as structured catalyst supports in chemical reactors. The cold-forming process and perforations make it worked foil, and its non-alloyed nickel composition and thickness below 0.15 mm place it under tariff item 7506.10.10.
Cold-Formed Nickel Foil for EMI Shielding
Ultra-thin cold-formed pure nickel foil for electromagnetic interference shielding in electronics, with thickness below 0.05 mm. The cold-forming process makes it worked foil, and its non-alloyed composition and thin gauge classify it under tariff item 7506.10.10.
Cold-Formed Nickel Foil for Flexible Circuits
Ultra-thin cold-formed nickel foil laminated into flexible printed circuits for wearables. The cold-forming process and lamination make it worked foil, and its non-alloyed nickel composition and thickness under 0.15 mm place it under tariff item 7506.10.10.
Cold-Formed Nickel Foil for Vacuum Deposition Targets
High-purity cold-formed nickel foil used as sputtering targets for thin-film vacuum deposition. The cold-forming process ensures uniform evaporation, and its non-alloyed composition and thickness below 0.15 mm classify it under tariff item 7506.10.10.
Cold-Formed Nickel Plate for Aerospace Shims
Precision cold-formed nickel plates used as shims and spacers in aircraft engines, with tight tolerances. These are worked plates of non-alloyed nickel, and while thicker than foil, they are classified under tariff item 7506.10.10 if they meet the worked foil criteria; however, as plates, they may not fit the foil definition, so this candidate is excluded.
Cold-Formed Nickel Plate for Heat Exchanger Components
Thick cold-formed nickel plates for gasketed plate heat exchangers in corrosive process streams. These are plates, not foil, and exceed the thickness limit of 0.15 mm, so they do not fall under tariff item 7506.10.10.
Cold-Formed Nickel Sheet for Architectural Panels
Decorative cold-formed nickel sheets for building facades and interior panels. These are sheets, not foil, and are thicker than 0.15 mm, so they are excluded from tariff item 7506.10.10.
Cold-Formed Nickel Sheet for Medical Implants
Biocompatible cold-formed nickel sheets for orthopedic implants and surgical instruments. These are sheets, not foil, and exceed the thickness limit, so they do not classify under tariff item 7506.10.10.
Cold-Formed Nickel Strip for Fuel Cell Components
Narrow cold-formed nickel strips (0.1-0.5mm thick) for bipolar plates in hydrogen fuel cells. Some strips may be ≤0.15 mm and qualify as foil, but the description includes thicker strips, so this candidate is not exclusively under this item.
Cold-Formed Nickel Strip for Jewelry Findings
Fine cold-formed nickel strip for hypoallergenic jewelry findings, clasps, and links. These are strips, not foil, and likely exceed 0.15 mm thickness, so they do not fall under tariff item 7506.10.10.
Cold-Formed Nickel Strip for Printed Circuit Boards
Precision cold-formed nickel strips for lead frames and connectors in PCB manufacturing. These are strips, not foil, and may exceed 0.15 mm, so they are excluded from tariff item 7506.10.10.
Cold-Formed Nickel Strip for RF Connectors
Cold-rolled nickel strip for high-frequency RF connector contacts. These are strips, not foil, and likely exceed 0.15 mm, so they do not classify under tariff item 7506.10.10.
Cold-Formed Pure Nickel Sheet for Chemical Processing
Cold-rolled nickel sheets (0.5-2mm thick) of 99.9% pure nickel. These are sheets, not foil, and exceed 0.15 mm, so they are excluded from tariff item 7506.10.10.
Cold-Rolled Nickel Sheet for Marine Hardware
Cold-formed 1mm nickel sheets for corrosion-resistant marine fittings. These are sheets, not foil, and exceed 0.15 mm, so they do not fall under tariff item 7506.10.10.