Cold-Formed Nickel Strip for RF Connectors
Cold-rolled nickel strip for high-frequency RF connector contacts. These are strips, not foil, and likely exceed 0.15 mm, so they do not classify under tariff item 7506.10.10.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Related Products under Tariff item 7506.10.10
Cold-Formed Nickel Foil for Battery Anodes
Cold-formed nickel foil for battery anodes, processed to precise thicknesses below 0.15 mm and used as anode current collectors in lithium-ion batteries. The cold-forming process imparts specific mechanical properties, and the product is classified under tariff item 7506.10.10 as worked foil of non-alloyed nickel.
Cold-Formed Nickel Foil for Catalyst Supports
Perforated cold-formed nickel foil used as structured catalyst supports in chemical reactors. The cold-forming process and perforations make it worked foil, and its non-alloyed nickel composition and thickness below 0.15 mm place it under tariff item 7506.10.10.
Cold-Formed Nickel Foil for EMI Shielding
Ultra-thin cold-formed pure nickel foil for electromagnetic interference shielding in electronics, with thickness below 0.05 mm. The cold-forming process makes it worked foil, and its non-alloyed composition and thin gauge classify it under tariff item 7506.10.10.
Cold-Formed Nickel Foil for Flexible Circuits
Ultra-thin cold-formed nickel foil laminated into flexible printed circuits for wearables. The cold-forming process and lamination make it worked foil, and its non-alloyed nickel composition and thickness under 0.15 mm place it under tariff item 7506.10.10.
Cold-Formed Nickel Foil for Vacuum Deposition Targets
High-purity cold-formed nickel foil used as sputtering targets for thin-film vacuum deposition. The cold-forming process ensures uniform evaporation, and its non-alloyed composition and thickness below 0.15 mm classify it under tariff item 7506.10.10.
Cold-Formed Nickel Plate for Aerospace Shims
Precision cold-formed nickel plates used as shims and spacers in aircraft engines, with tight tolerances. These are worked plates of non-alloyed nickel, and while thicker than foil, they are classified under tariff item 7506.10.10 if they meet the worked foil criteria; however, as plates, they may not fit the foil definition, so this candidate is excluded.