Nickel Thermal Spray Foil 0.15 mm
0.15 mm pure nickel foil strips for thermal spray wire feedstock in surface coating applications. Its non-alloyed composition and exact thickness limit qualify it for tariff item 7506.10.10. Provides uniform coating deposition for wear and corrosion resistance.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the foil thickness exceeds 0.15 mm
Thicker nickel foil is classified under the 'Other' subheading.
If the product is in powder form
Nickel powders are classified under heading 7504.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the foil thickness does not exceed 0.15 mm, as thicker foil falls under a different subheading
• Provide a certificate of analysis for nickel purity
• If the foil is used as feedstock, ensure it is not considered waste or scrap
Related Products under Tariff item 7506.10.10
Battery Cathode Nickel Foil 0.08 mm
Ultra-thin 0.08 mm pure nickel foil used as a cathode current collector in lithium-ion batteries. Its non-alloyed composition and thickness below 0.15 mm qualify it for tariff item 7506.10.10. Enhances battery performance with high electrical conductivity and corrosion resistance.
Cold-Formed Nickel Foil for Battery Anodes
Cold-formed nickel foil for battery anodes, processed to precise thicknesses below 0.15 mm and used as anode current collectors in lithium-ion batteries. The cold-forming process imparts specific mechanical properties, and the product is classified under tariff item 7506.10.10 as worked foil of non-alloyed nickel.
Cold-Formed Nickel Foil for Catalyst Supports
Perforated cold-formed nickel foil used as structured catalyst supports in chemical reactors. The cold-forming process and perforations make it worked foil, and its non-alloyed nickel composition and thickness below 0.15 mm place it under tariff item 7506.10.10.
Cold-Formed Nickel Foil for EMI Shielding
Ultra-thin cold-formed pure nickel foil for electromagnetic interference shielding in electronics, with thickness below 0.05 mm. The cold-forming process makes it worked foil, and its non-alloyed composition and thin gauge classify it under tariff item 7506.10.10.
Cold-Formed Nickel Foil for Flexible Circuits
Ultra-thin cold-formed nickel foil laminated into flexible printed circuits for wearables. The cold-forming process and lamination make it worked foil, and its non-alloyed nickel composition and thickness under 0.15 mm place it under tariff item 7506.10.10.
Cold-Formed Nickel Foil for Vacuum Deposition Targets
High-purity cold-formed nickel foil used as sputtering targets for thin-film vacuum deposition. The cold-forming process ensures uniform evaporation, and its non-alloyed composition and thickness below 0.15 mm classify it under tariff item 7506.10.10.