Bronze Foil 0.08mm Sheet
Bronze foil, a copper-tin alloy, at 0.08mm thickness, unbacked, for electrical shielding and artistic inlays. The tin content predominates over other elements, classifying it as bronze, and the thickness is within the foil limit.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the product is thicker than 0.15mm, it is not foil.
Copper alloy plates, sheets, and strip are in heading 7409.
If the foil is of refined copper, not bronze.
Refined copper foil is a separate item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the tin content is at least 3% and predominates over other elements to classify as bronze
• Provide alloy composition documentation
• Ensure the foil is unbacked and thickness is under 0.15mm
Related Products under Tariff item 7410.12.00
Admiralty Brass Foil 0.05mm
Admiralty brass foil, a copper-zinc-tin alloy, at 0.05mm thickness, unbacked, used in marine heat exchangers. The tin content is below 3%, so it qualifies as a brass under the subheading note, and the thickness is within the 0.15mm limit for foil.
Brass Anode Foil 0.08mm
Brass anode foil, a high-purity copper-zinc alloy, at 0.08mm thickness, unbacked, used as anode material in electroplating. The zinc content makes it a brass, and the thickness is under 0.15mm, fitting the foil definition.
Brass Decorative Foil 0.03mm
Brass decorative foil, an ultra-thin 0.03mm copper-zinc alloy, unbacked, for decorative inlays in furniture and art. The zinc content makes it a brass, and the thickness is well within the foil limit.
Brass Etching Foil 0.1mm
Brass etching foil, a 0.1mm thick copper-zinc alloy, unbacked, designed for chemical etching in electronics prototyping. The zinc content makes it a brass, and the thickness is under 0.15mm.
Brass Foil 0.10mm Thickness
Brass foil, a copper-zinc alloy, at 0.10mm thickness, unbacked, used in precision gaskets and decorative laminates. The zinc content predominates over other elements, making it a brass, and the thickness is under 0.15mm.
Brass Gasket Foil 0.12mm
Brass gasket foil, a 0.12mm thick copper-zinc alloy, unbacked, precision-cut for thin gaskets in hydraulic systems. The zinc content makes it a brass, and the thickness is within the foil limit.