C26000 Cartridge Brass Sheet
Cartridge brass sheet in C26000 alloy (70% copper, 30% zinc), 1.2 mm thick and 400 mm wide, is a flat-rolled product of a copper-zinc base alloy (brass). It is classified under tariff item 7409.19.00 as a plate, sheet or strip of refined copper, other, because brass is treated as refined copper under the tariff nomenclature when it does not meet the definition of a copper alloy for this heading.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the sheet is of a copper-zinc base alloy (brass) that is not considered refined copper
This subheading covers plates, sheets and strip of copper-zinc base alloys, which may apply if the zinc content exceeds the limits for refined copper.
If the sheet is of another copper alloy, such as a bronze
This subheading covers other copper alloy plates, sheets and strip, for alloys not classified as brass or copper-nickel.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the copper content and alloy composition are documented, as brass is classified as refined copper for this heading
• Verify the thickness exceeds 0.15 mm and the width is under 500 mm to match the statistical suffix
• Keep mill test certificates to support the declared alloy grade
Related Products under Tariff item 7409.19.00
99.95% Pure Refined Copper Sheet 0.5mm Thick 1100mm Wide
Ultra-pure 99.95% refined copper sheet 0.5mm x 1100mm for vacuum chamber linings. Low impurity levels are essential for high-vacuum applications.
99.99% Pure Refined Copper Block Sheet 7mm Thick
Ultra-pure 99.99% refined copper block sheet, 7mm thick, for semiconductor heat sinks. Its exceptional purity minimizes impurities, making it ideal for high-performance thermal management applications.
Annealed Refined Copper Sheet 2.5mm Thick 800mm Wide
Soft annealed refined copper sheet 2.5mm thick, 800mm wide for architectural flashing and ornaments. Provides malleability for forming applications.
Anode-Grade Refined Copper Plate 15mm Thick
Anode-grade refined copper plate, 15mm thick, for secondary smelting feed. This semi-fabricated form is used as a raw material in smelting operations.
Busbar Grade Refined Copper Sheet 4mm Thick 700mm Wide
Busbar-grade refined copper sheet 4mm thick x 700mm wide for electrical substations. Meets ASTM B187 standards for conductivity.
C10100 Oxygen-Free Copper Sheet
C10100 oxygen-free copper sheet, 99.99% Cu with minimal oxygen, 2 mm thick and 420 mm wide, used for RF shielding. The refined copper purity and dimensions (thickness >0.15 mm, width <500 mm) place it under tariff item 7409.19.00.