C-110 Refined Copper Foil Coil
A coil of refined C-110 copper foil with thickness 0.2 mm and width 300 mm, used for electrical applications like PCB manufacturing. Although called foil, the thickness exceeds 0.15 mm, so it falls under plates, sheets and strip. It is refined copper in coils, meeting the tariff item's criteria.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the thickness is 0.15 mm or less
Covers refined copper foil, not exceeding 0.15 mm thickness.
If the product is not in coils
Covers refined copper plates, sheets and strip in non-coil form.
If the product is wire of refined copper in coils
Applies if the cross-section is round and meets the wire definition.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the thickness exceeds 0.15 mm to avoid classification as foil under heading 7410
• Provide purity documentation showing at least 99.85% copper
• Ensure the product is in coil form and declare the intended use for PCB manufacturing
Related Products under Tariff item 7409.11.00
Annealed Refined Copper Ribbon for Heat Sinks
Soft-annealed refined copper ribbon coil, 0.8 mm thick and 480 mm wide, used for heat sink fins. The annealing process enhances thermal conductivity without altering the refined copper composition. It falls under this tariff item as refined copper in coils with a thickness exceeding 0.15 mm.
Architectural Copper Coil Stock 3.0mm
Heavy gauge architectural copper coil stock, 3.0 mm thick, used for building facades and cladding. This refined copper plate/sheet in coils falls under tariff item 7409.11.00 as it exceeds 0.15 mm thickness and is presented in coil form.
Battery Current Collector Copper Foil 0.1mm Wait, 0.4mm
Refined copper strip, 0.4 mm thick, in coils, designed for battery current collectors. This product falls under tariff item 7409.11.00 as a plate/sheet/strip of refined copper exceeding 0.15 mm thickness, presented in coils.
Battery Tab Refined Copper Foil Coil
Ultra-thin refined copper foil coil for lithium battery tabs, 0.15mm thick and 150mm wide. The refined copper composition and coil form meet the tariff item criteria, with thickness exceeding 0.15mm.
Busbar Grade ETP Copper Coil 4.0mm
ETP (electrolytic tough pitch) copper coil stock, 4.0 mm thick, for electrical busbars with high IACS conductivity. This refined copper plate in coils is classified under tariff item 7409.11.00, as it exceeds 0.15 mm thickness and is presented in coil form.
C10100 Oxygen-Free Copper Wide Coil
Ultra-pure oxygen-free copper (C10100) coil stock, 0.4 mm thick, 600 mm wide, for RF shielding. This refined copper plate/sheet in coils is classified under tariff item 7409.11.00, meeting thickness and width specifications.