Threaded Insert M8 x 1.25
A steel threaded insert, M8 x 1.25 internal thread with an external knurl for press-fit installation into wood or plastic. It converts holes to machine threads and has a slotted body for installation. This is classified as an 'other' threaded article of steel.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the threaded insert is considered a nut
Nuts are classified under 7318.15.00, but this insert is not a standard nut.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Classify the threaded insert as a threaded fastener under 7318.19.00, not as a bushing or other article
• Provide the internal thread size and external knurl details for accurate classification
• If the insert is sold with installation tools, consider whether it is a set
Related Products under Tariff item 7318.19.00
Adjusting Screw M5 x 0.8 x 20mm
A fine thread adjusting screw, M5 x 0.8 by 20mm, used for machine leveling feet and set-up. It is made of steel with a slotted or hex head. This is classified as an 'other' threaded article, as it is not a standard bolt or screw.
Carriage Bolt 1/2-13 x 6 Inch
A carriage bolt with a square neck, 1/2-13 thread by 6 inches, made of low carbon steel. The square neck prevents spinning during nut tightening, making it ideal for wood-to-wood or wood-to-metal connections. It is classified as an 'other' threaded article, as it is not a standard hex bolt.
Clevis Pin with Thread 3/8-24 x 2 Inch
A threaded clevis pin, 3/8 inch diameter by 2 inches, with a 24 tpi end thread and head slots for cotter retention. It is used in linkages and is made of steel. This is classified as an 'other' threaded article, as it is not a standard bolt or screw.
Concrete Screw Anchor 1/4 x 2-1/8 Inch
A concrete screw anchor with a hex washer head, 1/4 inch diameter by 2-1/8 inches long, with a knurled shank for masonry anchoring. It is designed for torque-driven embedment in concrete, providing pull-out resistance. This is classified as an 'other' threaded article of steel.
Deck Screw #10 x 3 Inch Star Drive
A coated steel deck screw, #10 gauge by 3 inches, with a star (Torx) drive and Type 17 point, designed for composite decking. The polymer coating reduces friction and resists corrosion. It is classified as an 'other' threaded article, as it is not a wood screw per subheading exclusions.
Dowel Screw 3/8-16 x 4 Inch Double End
A double-ended threaded dowel screw, 3/8-16 by 4 inches, used for joining two wood pieces without nuts. It has no head and features wrench flats for installation. This is classified as an 'other' threaded article of steel, as it is not a bolt or wood screw.