Duty Rate (from China)
Products classified under Tariff item 7318.19.00.00
Adjusting Screw M5 x 0.8 x 20mm
A fine thread adjusting screw, M5 x 0.8 by 20mm, used for machine leveling feet and set-up. It is made of steel with a slotted or hex head. This is classified as an 'other' threaded article, as it is not a standard bolt or screw.
7318.19.00Carriage Bolt 1/2-13 x 6 Inch
A carriage bolt with a square neck, 1/2-13 thread by 6 inches, made of low carbon steel. The square neck prevents spinning during nut tightening, making it ideal for wood-to-wood or wood-to-metal connections. It is classified as an 'other' threaded article, as it is not a standard hex bolt.
7318.19.00Clevis Pin with Thread 3/8-24 x 2 Inch
A threaded clevis pin, 3/8 inch diameter by 2 inches, with a 24 tpi end thread and head slots for cotter retention. It is used in linkages and is made of steel. This is classified as an 'other' threaded article, as it is not a standard bolt or screw.
7318.19.00Concrete Screw Anchor 1/4 x 2-1/8 Inch
A concrete screw anchor with a hex washer head, 1/4 inch diameter by 2-1/8 inches long, with a knurled shank for masonry anchoring. It is designed for torque-driven embedment in concrete, providing pull-out resistance. This is classified as an 'other' threaded article of steel.
7318.19.00Deck Screw #10 x 3 Inch Star Drive
A coated steel deck screw, #10 gauge by 3 inches, with a star (Torx) drive and Type 17 point, designed for composite decking. The polymer coating reduces friction and resists corrosion. It is classified as an 'other' threaded article, as it is not a wood screw per subheading exclusions.
7318.19.00Dowel Screw 3/8-16 x 4 Inch Double End
A double-ended threaded dowel screw, 3/8-16 by 4 inches, used for joining two wood pieces without nuts. It has no head and features wrench flats for installation. This is classified as an 'other' threaded article of steel, as it is not a bolt or wood screw.
7318.19.00Eye Bolt 3/8-16 Forged Steel
A forged steel eye bolt with 3/8-16 shoulder threads, used for rigging and lifting applications. It provides a secure loop for cables and is made from forged steel for strength. This is classified as an 'other' threaded article, similar to screw hooks.
7318.19.00M6 x 1.0 Hex Head Cap Screw
A fully threaded hex head cap screw, M6 with 1.0mm pitch, made of carbon steel. It is used for general fastening in machinery and construction. This is classified as an 'other' threaded article, as it is not a wood screw or a standard bolt.
7318.19.00Self-Drilling Tek Screw #12 x 1 Inch
A self-drilling Tek screw, #12 by 1 inch, with a #3 drill point for thin steel roofing and HVAC ducting. It eliminates the need for pre-drilling, speeding up installation. This is classified as an 'other' threaded article of steel, as it is not a wood screw or a standard bolt.
7318.19.00Set Screw M4 x 0.7 Cup Point
A headless M4 x 0.7 set screw with a cup point, used for locking shafts in pulleys and gears. It is made of alloy steel. This is classified as an 'other' threaded article, as it lacks a head and is not a wood screw.
7318.19.00Shoulder Bolt 10-24 x 1/2 Inch Shoulder
A precision shoulder bolt with a 10-24 thread and a 1/2-inch unthreaded shoulder, made of alloy steel. It is used as a pivot or locator in jigs and fixtures, where the shoulder provides precise alignment. This product is classified as an 'other' threaded article of iron or steel, as it is not a standard bolt with a fully threaded shank.
7318.19.00Stainless Steel Lag Screw 5/16-18 x 3 Inch
A heavy-duty lag screw with coarse 5/16-18 threads and a pointed end, made from 304 stainless steel for outdoor decking and timber framing. It is classified as an 'other' threaded article, as it is not a wood screw per subheading exclusions.
7318.19.00Threaded Insert M8 x 1.25
A steel threaded insert, M8 x 1.25 internal thread with an external knurl for press-fit installation into wood or plastic. It converts holes to machine threads and has a slotted body for installation. This is classified as an 'other' threaded article of steel.
7318.19.00Threaded Rod Stud M10 x 1.5 x 100mm
A fully threaded rod segment or stud, M10 x 1.5 pitch by 100mm long, made of carbon steel. It is used for jigs, fixtures, and adjustable assemblies. This is classified as an 'other' threaded article, as it is not a bolt with a head.
7318.19.00U-Bolt 5/16-18 x 4 Inch Leg
A threaded U-bolt, 5/16-18 with 4-inch legs, used for pipe clamps and suspension systems. It is made of steel and has threads on both ends. This is classified as an 'other' threaded article, similar to screw hooks.