Incoloy 825 Hot-Rolled High-Nickel Steel Coil
Incoloy 825 is a high-nickel alloy steel containing about 42% nickel, presented as a hot-rolled coil with a thickness of 4.75 mm or more and a width of 600 mm or more. It is not further worked than hot-rolled, making it a flat-rolled product of other alloy steel under tariff item 7225.30.00. This product is commonly used in chemical processing and marine applications due to its corrosion resistance.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the coil is not in coils but in straight lengths
Flat-rolled products of other alloy steel, not further worked than hot-rolled, but not in coils.
If the width is less than 600 mm
Flat-rolled products of other alloy steel, of a width of less than 600 mm, not further worked than hot-rolled.
If the nickel content exceeds the steel content and it is classified as a nickel alloy
Products of nickel, not alloyed, in plates, sheets, strip and foil, if the material is predominantly nickel by weight.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the coil's dimensions (thickness ≥4.75 mm, width ≥600 mm) and nickel content are clearly documented on the commercial invoice to support classification under 7225.30.00
• Provide a mill test certificate showing the alloy composition, as CBSA may verify the high-nickel content
• If the coil is further processed (e.g
• pickled or annealed), it may fall under a different tariff item
Related Products under Tariff item 7225.30.00
A2 Tool Steel Hot-Rolled Coil
A2 tool steel hot-rolled coil, 5.5 mm thick and 1000 mm wide, supplied in coils without further working. A2 is an air-hardening tool steel with high carbon and chromium content, making it an alloy steel under Chapter 72. The product is flat-rolled, of a width exceeding 600 mm, and not further worked than hot-rolled, fitting the tariff item.
AL-6XN Hot-Rolled High-Nickel Alloy Coil
This is a hot-rolled coil of AL-6XN super-austenitic high-nickel alloy steel, containing at least 24% nickel by weight, with a thickness of 4.75 mm or more and a width of 600 mm or more. It is classified under tariff item 7225.30.00 as a flat-rolled product of other alloy steel, not further worked than hot-rolled, in coils. The product has a black finish from hot rolling and is not further processed.
Alloy 20Cb-3 Hot-Rolled High-Nickel Steel Coil
This is a hot-rolled coil of Alloy 20Cb-3 (Incoloy 20), a high-nickel austenitic alloy steel containing about 35% nickel, with a thickness of 4.75 mm or more and a width of 600 mm or more. It is classified under tariff item 7225.30.00 as a flat-rolled product of other alloy steel, not further worked than hot-rolled, in coils. The product is supplied in coils without further surface treatment.
Carpenter 20 Hot-Rolled Alloy Steel Coil
This is a hot-rolled coil of Carpenter 20Cb-3 high-nickel stainless steel, with a thickness of 4.75 mm or more and a width of 600 mm or more. It is classified under tariff item 7225.30.00 as a flat-rolled product of other alloy steel, not further worked than hot-rolled, in coils. The product is supplied in coils without further processing.
CPM-10V Tool Steel Hot-Rolled Coil
CPM-10V tool steel hot-rolled coil, 10 mm thick and 1600 mm wide, for wear-resistant knives. CPM-10V is a powdered metallurgy tool steel with high carbon and vanadium content, classified as other alloy steel. The product is flat-rolled, wide, and in coils, not further worked.
CPM-M4 Tool Steel Hot-Rolled Coil
CPM-M4 tool steel hot-rolled coil, 6.5 mm thick and 950 mm wide, produced by powder metallurgy. This alloy steel contains high carbon and chromium, qualifying as tool steel. The product is flat-rolled, over 600 mm wide, and in coils, not further worked than hot-rolled.