Hot-Rolled 4330V Modified Alloy Steel Coil
Hot-rolled 4330V modified alloy steel coil, with a width of 850 mm and a thickness of 9 mm, is not further worked than hot-rolled. It is a flat-rolled product of other alloy steel under tariff item 7225.30.00, used in structural applications requiring high strength. The vacuum-melted alloy composition includes nickel, chromium, and molybdenum for enhanced mechanical properties.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the product is in straight lengths rather than coils
Flat-rolled products of other alloy steel, not further worked than hot-rolled, but not in coils.
If the width is less than 600 mm
Flat-rolled products of other alloy steel, of a width of less than 600 mm, not further worked than hot-rolled.
If the product is in bars and rods, not in coils
Other bars and rods of other alloy steel, not further worked than hot-rolled, hot-drawn or extruded.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the coil's dimensions and alloy composition are clearly documented, as CBSA may verify the classification
• Provide a certificate of analysis to support the alloy steel designation
• If the product is further worked, such as cold-rolled or heat-treated, it may be classified under a different tariff item
Related Products under Tariff item 7225.30.00
A2 Tool Steel Hot-Rolled Coil
A2 tool steel hot-rolled coil, 5.5 mm thick and 1000 mm wide, supplied in coils without further working. A2 is an air-hardening tool steel with high carbon and chromium content, making it an alloy steel under Chapter 72. The product is flat-rolled, of a width exceeding 600 mm, and not further worked than hot-rolled, fitting the tariff item.
AL-6XN Hot-Rolled High-Nickel Alloy Coil
This is a hot-rolled coil of AL-6XN super-austenitic high-nickel alloy steel, containing at least 24% nickel by weight, with a thickness of 4.75 mm or more and a width of 600 mm or more. It is classified under tariff item 7225.30.00 as a flat-rolled product of other alloy steel, not further worked than hot-rolled, in coils. The product has a black finish from hot rolling and is not further processed.
Alloy 20Cb-3 Hot-Rolled High-Nickel Steel Coil
This is a hot-rolled coil of Alloy 20Cb-3 (Incoloy 20), a high-nickel austenitic alloy steel containing about 35% nickel, with a thickness of 4.75 mm or more and a width of 600 mm or more. It is classified under tariff item 7225.30.00 as a flat-rolled product of other alloy steel, not further worked than hot-rolled, in coils. The product is supplied in coils without further surface treatment.
Carpenter 20 Hot-Rolled Alloy Steel Coil
This is a hot-rolled coil of Carpenter 20Cb-3 high-nickel stainless steel, with a thickness of 4.75 mm or more and a width of 600 mm or more. It is classified under tariff item 7225.30.00 as a flat-rolled product of other alloy steel, not further worked than hot-rolled, in coils. The product is supplied in coils without further processing.
CPM-10V Tool Steel Hot-Rolled Coil
CPM-10V tool steel hot-rolled coil, 10 mm thick and 1600 mm wide, for wear-resistant knives. CPM-10V is a powdered metallurgy tool steel with high carbon and vanadium content, classified as other alloy steel. The product is flat-rolled, wide, and in coils, not further worked.
CPM-M4 Tool Steel Hot-Rolled Coil
CPM-M4 tool steel hot-rolled coil, 6.5 mm thick and 950 mm wide, produced by powder metallurgy. This alloy steel contains high carbon and chromium, qualifying as tool steel. The product is flat-rolled, over 600 mm wide, and in coils, not further worked than hot-rolled.