S7 Tool Steel Rectangle Bar Stock
S7 tool steel rectangle bar stock, a shock-resisting tool steel in rectangular semi-finished form with width at least four times thickness. It is used for impact tools and is a semi-finished product of other alloy steel. This product falls under tariff item 7224.90.00 as other semi-finished products of other alloy steel.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the bar stock is hot-rolled into bars or rods
Other bars and rods of other alloy steel, not further worked than hot-rolled, hot-drawn or extruded, would apply if the product is not semi-finished.
If the product is in primary form, such as ingots
Ingots or other primary forms of other alloy steel are classified separately under heading 7224.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the product is not further worked than primary hot-rolling or forging; any additional processing may change classification
• Provide a mill certificate showing the carbon and chromium content to support classification as other alloy steel
• Check if the product is considered a 'flat-rolled product' under Chapter 72 Note 1(k), which would exclude it from this heading
Related Products under Tariff item 7224.90.00
15CrMoG Boiler Tube Billet
15CrMoG low-alloy steel billets, a chromium-molybdenum grade per Chinese standard, are semi-finished products of other alloy steel. They are intended for further processing into high-pressure boiler tubes and are not yet in the form of finished tubes or pipes.
1.6582 (18NiCrMo5) Alloy Steel Bloom
DIN 1.6582 (18NiCrMo5) alloy steel blooms are semi-finished products of case-hardening nickel-chromium-molybdenum steel. They are supplied in bloom form for subsequent rolling or forging into automotive transmission components.
34CrNiMo6 Gear Steel Billet
EN 34CrNiMo6 alloy steel billets are semi-finished products of nickel-chromium-molybdenum case-hardening steel. They are used for large gears and crankshafts and are supplied in billet form before further hot-working.
A2 Tool Steel Rectangle Slab
A2 tool steel rectangle slab, a semi-finished product of other alloy steel, with a rectangular cross-section where the width exceeds four times the thickness. It is air-hardening and used for shear blades and punches. This product falls under tariff item 7224.90.00 as it is a semi-finished product of other alloy steel, not further worked than hot-rolled or forged.
A2 Tool Steel Square Billet
A2 tool steel square billet is a semi-finished product with a square cross-section, width/thickness ratio under 4:1, primarily for forging into punches and shear blades. It is classified under tariff item 7224.90.00 as other alloy steel semi-finished products, given its tool steel composition.
AISI 316 Modified Alloy Billet
Modified AISI 316 alloy steel billets, with a chromium content below 10.5%, do not meet the definition of stainless steel. They are semi-finished products of other alloy steel, intended for pressure vessel applications.