17-4 PH Stainless Precipitation Hardening Angle 28x28x4mm
A hot-rolled 17-4 PH stainless steel angle bar with 28 mm equal legs and 4 mm thickness, with a cross-section under 80 mm. It is used for aerospace brackets and is not further worked beyond hot rolling, so it qualifies as an angle, shape or section of stainless steel under tariff item 7222.40.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the angle is imported in bars and rods form, not as an angle shape
Bars and rods of stainless steel, hot-rolled, fall under this heading when not conforming to the angle, shape or section definition.
If the angle is further worked, such as drilled or punched
Other bars and rods of stainless steel, not further worked than hot-rolled, may cover products with additional processing.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the angle is not drilled, punched, or otherwise advanced beyond hot rolling, as further processing may change classification
• Provide a mill test certificate showing the 17-4 PH composition to confirm it meets stainless steel definitions
• Verify the cross-section dimension is under 80 mm to stay within this tariff item
Related Products under Tariff item 7222.40.00
17-4PH Stainless Hot-Rolled Flat Bar Section 150x20mm
Precipitation-hardening 17-4PH stainless steel hot-rolled flat bar, treated as a shape, with 150mm width and 20mm thickness. The maximum dimension exceeds 80mm, and the product is not further advanced. This section is classified under tariff item 7222.40.00 for angles, shapes and sections of stainless steel, suitable for aerospace and valve applications.
17-4 PH Stainless Steel Angle 110x110x10mm
Precipitation-hardening 17-4 PH stainless hot-rolled angle, 110mm square x 10mm, exceeding 80mm max dimension. This product qualifies as an angle, shape or section of stainless steel under tariff item 7222.40.00, used in aerospace structural components.
310 Stainless Steel Angle Profile 45x45x5mm
A hot-rolled 310 stainless steel equal angle with 45 mm legs and 5 mm thickness, with a cross-section under 80 mm and no punching. It is used in furnace construction due to its high-temperature resistance, and it falls under tariff item 7222.40.00 for angles, shapes and sections of stainless steel.
310 Stainless Steel Angle Section 120x120x15mm
High-temperature 310 stainless hot-rolled angle, 120mm equal x 15mm thick. This product is an angle, shape or section of stainless steel under tariff item 7222.40.00, used in furnace and heat-resistant applications.
316L Stainless Hot-Rolled Equal Angle 90x90x8mm
Marine-grade 316L stainless steel equal angle, hot-rolled, with 90mm x 90mm x 8mm dimensions and a maximum dimension exceeding 80mm. The product is not drilled or advanced. This angle is classified under tariff item 7222.40.00 for angles, shapes and sections of stainless steel, ideal for offshore platforms and similar corrosive environments.
316L Stainless Steel Equal Angle 40x40x5mm Hot-Rolled
A hot-rolled 316L stainless steel equal angle with 40 mm legs and 5 mm thickness, with a cross-section under 80 mm. It is suitable for marine environments and is not drilled, punched, or otherwise advanced, so it falls under tariff item 7222.40.00 for angles, shapes and sections of stainless steel.