Containing indentations, ribs, grooves or other deformations produced during the rolling process
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. > Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: > Of circular cross-section > Containing indentations, ribs, grooves or other deformations produced during the rolling process
Duty Rate (from China)
Products classified under Tariff item 7222.11.00.10
15-5 PH Stainless Steel Bar Stock
15-5 PH precipitation hardening stainless steel round bar stock, hot-rolled with a nickel content of 15%. This product is used in aerospace landing gear components and is classified as a stainless steel bar not further worked than hot-rolled, with a nickel content between 8% and 24%.
7222.11.0017-4 PH Hot-Rolled Stainless Round Bar 25mm
A 25mm diameter precipitation hardening 17-4 PH stainless steel round bar, hot-rolled to a circular cross-section and not further worked. This product falls under tariff item 7222.11.00 as a bar or rod of stainless steel, of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. Its high strength and corrosion resistance make it suitable for fasteners and gears.
7222.11.0017-4PH Precipitation Hardening Round Rod
>- 17-4PH precipitation hardening stainless steel round rod, hot-rolled, 120mm diameter circular section, with less than 4% nickel. This rod is not further worked than hot-rolling and is classified under tariff item 7222.11.00. It is used in aerospace and valve stem applications due to its high strength and corrosion resistance.
7222.11.0017-4 PH Stainless Steel Hot-Rolled Bar
17-4 PH precipitation hardening stainless steel hot-rolled round bar with a nickel content of 11% and a diameter of 40 mm. This product is used for valve stems and is classified as a stainless steel bar not further worked than hot-rolled, with a nickel content between 8% and 24%.
7222.11.00304L Hot-Extruded Stainless Steel Rod 38mm Dia
A 38mm diameter low-carbon 304L stainless steel rod, hot-extruded with a circular cross-section and not further worked. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. The low carbon content enhances weldability, making it common in food processing equipment.
7222.11.00310 Stainless Steel Round Rod
310 stainless steel round rod, hot-drawn with a nickel content of 19-22% and a diameter of 80 mm. This product is used for high-temperature furnace parts and is classified as a stainless steel bar not further worked than hot-drawn, with a nickel content between 8% and 24%.
7222.11.00316 Hot-Drawn Stainless Round Bar 50mm
A 50mm diameter 316 stainless steel bar, hot-drawn to a circular cross-section and not further worked. This product is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. Its corrosion resistance makes it a standard choice in the chemical industry.
7222.11.00316L Low-Nickel Hot-Rolled Stainless Round Rod
>- 316L low-nickel stainless steel round rod, hot-drawn, circular cross-section with maximum 100mm diameter, containing less than 8% nickel. This rod is not further worked than hot-drawing and falls under tariff item 7222.11.00. It is used in marine hardware and chemical processing equipment.
7222.11.00316L Stainless Steel Extruded Rod
316L stainless steel hot-extruded round rod with a nickel content of 10% and a diameter of 50 mm. This low-carbon product is used for pharmaceutical equipment shafts and is classified as a stainless steel bar not further worked than hot-extruded, with a nickel content between 8% and 24%.
7222.11.00321 Stainless Steel Hot-Extruded Rod
321 stainless steel hot-extruded round rod with a nickel content of 9-12% and a diameter of 25 mm. This product is used for aircraft exhaust components and is classified as a stainless steel bar not further worked than hot-extruded, with a nickel content between 8% and 24%.
7222.11.00321 Stainless Steel Hot-Rolled Round Rod 12mm
A 12mm diameter hot-rolled 321 stabilized stainless steel rod, with a circular cross-section and not further worked. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. The titanium stabilization provides excellent weldability, suitable for aerospace and exhaust applications.
7222.11.00409 Hot-Rolled Stainless Exhaust Tubing Rod
Grade 409 ferritic stainless steel round bar, hot-rolled to a 90 mm diameter, with a nickel content below 1%. This product is used in the fabrication of automotive exhaust systems and qualifies as a stainless steel bar not further worked than hot-rolled.
7222.11.00430 Hot-Rolled Stainless Rod 10mm Diameter
A 10mm diameter ferritic 430 stainless steel rod, hot-rolled with a circular cross-section and not further worked. This product is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. Its corrosion resistance and formability make it suitable for automotive trim applications.
7222.11.00AISI 304 Hot-Rolled Stainless Steel Round Bar
AISI 304 stainless steel round bar, hot-rolled with a circular cross-section under 152.4 mm diameter and a nickel content certified below 8%. This product is used in structural applications and is classified as a stainless steel bar not further worked than hot-rolled.
7222.11.00AISI 410 Hot-Rolled Stainless Round Bar 3/4 Inch
A 3/4 inch diameter hot-rolled round bar made from martensitic 410 stainless steel, with a circular cross-section and not further worked. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. This grade is commonly used in valve stems and pump shafts due to its hardness and wear resistance.
7222.11.00AL-6XN Hot-Rolled Round Rod
>- AL-6XN super-austenitic stainless steel hot-rolled rod, circular 22mm diameter, containing 23.5-25.5% nickel. This high-nickel stainless steel rod is not further worked than hot-rolling and is classified under tariff item 7222.11.00. It is used in seawater desalination due to its excellent resistance to chloride corrosion.
7222.11.00Alloy 20 Hot-Rolled Stainless Rod
>- Alloy 20 (Carpenter 20Cb3, UNS N08020) hot-rolled round rod, 50mm diameter, with 32-38% nickel. This high-nickel stainless steel rod is not further worked than hot-rolling and falls under tariff item 7222.11.00. It is used in sulfuric acid handling due to its exceptional corrosion resistance.
7222.11.00Duplex 2205 Hot-Drawn Stainless Steel Bar 1 Inch Dia
A 1-inch diameter hot-drawn duplex 2205 stainless steel bar, with a circular cross-section and not further worked. This product is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. Its high strength and corrosion resistance make it ideal for offshore oil platforms.
7222.11.00Electroslag Remelted 304 Stainless Steel Hot-Rolled Bar
A 25mm diameter standard 304 austenitic stainless steel bar, electroslag remelted and hot-rolled only, with a circular cross-section and not further worked. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. The electroslag remelting process refines the microstructure for superior cleanliness, making it ideal for corrosion-resistant structural parts.
7222.11.00Electroslag Remelted 316L Stainless Steel Round Bar
A 316L stainless steel bar produced via electroslag remelting with a circular cross-section, not further worked beyond hot-rolling. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. The remelting process refines the microstructure for superior cleanliness, enhancing corrosion resistance for demanding applications.
7222.11.00Electroslag Remelted Custom 321 Stainless Steel Bar
A 321 stabilized austenitic stainless steel bar, electroslag remelted for weldability in exhaust systems, with a circular hot-drawn section and not further worked. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. The titanium stabilization and remelting process enhance weldability and corrosion resistance.
7222.11.00Electroslag Remelted Inconel 718 Equivalent Stainless Bar
A high-performance stainless steel bar akin to Inconel 718, electroslag remelted with a circular cross-section for turbine blades, not further worked than hot-rolled. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded, provided it meets the stainless steel definition with at least 10.5% chromium. The remelting process improves cleanliness for high-temperature applications.
7222.11.00Ferritic 430 Hot-Extruded Stainless Steel Bar
Ferritic 430 grade stainless steel round bar, hot-extruded with a diameter of 80 mm and a nickel content below 0.5%. This product is commonly used in automotive exhaust components and qualifies as a stainless steel bar not further worked than hot-extruded.
7222.11.00Hastelloy C-276 Hot-Rolled Bar
>- Hastelloy C-276 hot-rolled circular bar, 38mm diameter, with 57% nickel, 16% molybdenum, and 15-17% chromium. This high-nickel alloy steel bar is not further worked than hot-rolling and is classified under tariff item 7222.11.00. It is used for extreme corrosion resistance in chemical processing.
7222.11.00Hastelloy X Hot-Extruded Bar
>- Hastelloy X hot-extruded circular bar, 45mm diameter, with 47% nickel superalloy composition. This high-nickel alloy steel bar is not further worked than hot-extrusion and falls under tariff item 7222.11.00. It is used in gas turbine combustion zones due to its high-temperature strength.
7222.11.00Hot-Extruded 316L Stainless Steel Rod 20mm Diameter
A 20mm diameter rod of 316L stainless steel produced by hot extrusion, featuring a smooth circular cross-section and not further worked. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. The low carbon content improves weldability, making it suitable for pharmaceutical equipment.
7222.11.00Hot-Rolled 304 Stainless Steel Round Bar 1/2 Inch Diameter
A 1/2 inch diameter round bar made from 304 stainless steel, hot-rolled to achieve its final shape with a circular cross-section and not further worked. This product is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. It is widely used in structural applications due to its corrosion resistance and strength.
7222.11.00Incoloy 800 Hot-Rolled Round Bar
>- Incoloy 800 hot-rolled round bar, 25mm diameter, containing over 30% nickel and 20% chromium. This high-nickel alloy steel bar is not further worked than hot-rolling and is classified under tariff item 7222.11.00. It is used in high-temperature applications such as furnace components.
7222.11.00Incoloy 825 Extruded Round Bar
>- Incoloy 825 hot-extruded bar, 30mm circular cross-section, with 38-46% nickel and titanium stabilization. This high-nickel alloy steel bar is not further worked than hot-extrusion and falls under tariff item 7222.11.00. It is used for oil and gas downhole tools due to its resistance to sulfide stress cracking.
7222.11.00Inconel 600 Hot-Rolled Bar
>- Inconel 600 hot-rolled round bar, 35mm diameter, with 72% minimum nickel and 14-17% chromium. This high-nickel alloy steel bar is not further worked than hot-rolling and is classified under tariff item 7222.11.00. It is used in nitration plants due to its resistance to caustic and chloride environments.
7222.11.00Inconel 625 Hot-Extruded Rod
>- Inconel 625 hot-extruded round rod, 19mm diameter, with 58% minimum nickel, 20-23% chromium, and molybdenum. This high-nickel superalloy rod is not further worked than hot-extrusion and falls under tariff item 7222.11.00. It is used for pitting resistance in marine and chemical applications.
7222.11.00Inconel 718 Hot-Rolled Rod
>- Inconel 718 hot-rolled round rod, 19mm diameter, with 52.5% minimum nickel and niobium. This age-hardenable high-nickel alloy steel rod is not further worked than hot-rolling and is classified under tariff item 7222.11.00. It is used for jet engine shafts due to its high strength at elevated temperatures.
7222.11.00Low-Nickel 439 Stainless Steel Round Bar
439 ferritic stainless steel round bar, hot-drawn to a 50 mm diameter with a nickel content below 0.5%. This corrosion-resistant product is used in appliance trim and qualifies as a stainless steel bar not further worked than hot-drawn.
7222.11.00Martensitic 410 Hot-Rolled Round Rod
410 martensitic stainless steel round rod, hot-rolled with a maximum dimension of 140 mm and a nickel content below 0.5%. This heat-treatable grade is used for cutlery blanks and fasteners, and qualifies as a stainless steel bar not further worked than hot-rolled.
7222.11.00Monel 400 Equivalent Hot-Rolled Round Bar 15mm
A 15mm diameter hot-rolled bar made from a nickel-copper alloy similar to Monel 400, with a circular cross-section and not further worked. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded, provided it meets the definition of stainless steel with at least 10.5% chromium. This material is used in marine propeller shafts due to its corrosion resistance.
7222.11.00Monel 400 Hot-Drawn Round Rod
>- Monel 400 hot-drawn round rod, 12mm diameter, with 63% minimum nickel and 28-34% copper. This high-nickel alloy steel rod is not further worked than hot-drawing and falls under tariff item 7222.11.00. It is used in marine applications due to its excellent corrosion resistance in seawater.
7222.11.00Vacuum Arc Remelted 15-5 PH Stainless Steel Round Rod
A 20mm diameter 15-5 PH martensitic precipitation hardening stainless rod, vacuum arc remelted, with a circular cross-section and hot-extruded, not further worked. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. This material is used in aerospace landing gear due to its high strength and toughness.
7222.11.00Vacuum Arc Remelted 17-4 PH Stainless Steel Rod
>- Vacuum arc remelted 17-4 PH precipitation hardening stainless steel rod of circular cross-section, hot-drawn. This rod is not further worked after hot-drawing, making it a bar or rod of stainless steel under heading 72.22. Its high strength and corrosion resistance suit turbine components.
7222.11.00Vacuum Arc Remelted Duplex 2205 Stainless Rod
>- Duplex 2205 (S31803) stainless steel rod, vacuum arc remelted, 1-inch circular cross-section, extruded or hot-drawn. This rod is not further worked after hot-forming and is classified as a stainless steel bar or rod of circular cross-section. Its duplex structure offers high strength and corrosion resistance for offshore applications.
7222.11.00Vacuum Arc Remelted Nitronic 60 Stainless Rod
>- Nitronic 60 high-manganese austenitic stainless steel rod, vacuum arc remelted, 38mm circular cross-section. This rod is not further worked than hot-drawn or extruded, and its circular cross-section places it under tariff item 7222.11.00. It is used for wear-resistant valves due to its high strength and galling resistance.