Duty Rate (from China)
Products classified under Tariff item 7220.90.00.00
17-4PH Stainless Steel Sheet
Precipitation-hardening stainless steel sheet with approximately 4% nickel and 3.5% molybdenum, width under 600 mm, used in aerospace components. This flat-rolled stainless steel product is not further worked and falls under this tariff item for other flat-rolled stainless steel.
7220.90.00310 Stainless High-Temp Strip
Hot-rolled 310 stainless steel strips, 1.2 mm thick and 400 mm wide, intended for furnace parts and kiln linings. These flat-rolled products are of stainless steel, less than 600 mm in width, and are not further worked than hot-rolled, falling under this tariff item for other flat-rolled stainless steel products.
7220.90.00316L Stainless Steel Annealed Strip
Hot-rolled and annealed 316L stainless steel flat strips, 1-3 mm thick and 400 mm wide, for marine and chemical applications. These are flat-rolled stainless steel products under 600 mm wide, not cold-rolled or further worked, and are classified as other flat-rolled stainless steel.
7220.90.00316Mo Stainless Steel Band
Enhanced 316 stainless band with 12% nickel and 2.5% molybdenum, flat-rolled and under 600 mm wide, for surgical tools. This stainless steel flat product is not further worked and is classified as other flat-rolled stainless steel.
7220.90.00321 Stainless Steel Annealed Sheet
Hot-rolled and solution annealed 321 stainless sheets, 2 mm thick and 550 mm wide, stabilized for high-temperature exhaust components. These flat-rolled stainless steel products are under 600 mm wide and not further worked, falling under this tariff item for other flat-rolled stainless steel.
7220.90.00409 Stainless Steel Heat Exchanger Foil
Thin hot-rolled 409 stainless steel foil, 0.15 mm thick and 500 mm wide, for finned heat exchanger cores in automotive radiators. This flat-rolled stainless steel product is under 600 mm wide and not further worked, classified as other flat-rolled stainless steel.
7220.90.00430 Stainless Steel Banding Strap
Flat-rolled 430 stainless steel strips, 0.5-1 mm thick and 300-500 mm wide before slitting, used for securing cargo and pallets. These are hot-rolled stainless flat products under 600 mm wide, not further worked, and fall under this tariff item for other flat-rolled stainless steel.
7220.90.00AL-6XN Stainless Steel Foil
Thin flat-rolled stainless foil with 21% nickel and 2.4% molybdenum, width under 600 mm, for heat exchanger manufacturing. This stainless steel flat product is not further worked and is classified as other flat-rolled stainless steel.
7220.90.00Alloy 254 SMO Steel Plate
Super austenitic stainless steel plate with 18% nickel and 2.5% molybdenum, under 600 mm wide, for marine applications. This flat-rolled stainless steel product is not further worked and falls under this tariff item for other flat-rolled stainless steel.
7220.90.00Custom 904L Stainless Steel Strip
High corrosion-resistant stainless strip with 1-2% nickel and 4% molybdenum, narrow width under 600 mm, for chemical processing equipment. This flat-rolled stainless steel product is not further worked and falls under this tariff item.
7220.90.00Stainless Steel 201 Edging Strip
Flat-rolled 201 stainless steel strips, 0.8 mm thick and 250 mm wide, used for furniture and appliance edging. These are hot-rolled stainless flat products under 600 mm wide, not further worked, and are classified as other flat-rolled stainless steel.
7220.90.00Stainless Steel 304 Shim Stock
Thin flat-rolled stainless steel 304 sheets, typically 0.1-1 mm thick and 100-500 mm wide, used for precision shimming in machinery alignment. These are hot-rolled stainless flat products under 600 mm wide, not further worked, and fall under this tariff item.
7220.90.00Stainless Steel Decorative Strip 430
Ferritic 430 stainless flat strips, 0.6 mm thick and 300 mm wide, for trim applications with a hot-rolled finish. These are flat-rolled stainless steel products under 600 mm wide, not further worked, and are classified as other flat-rolled stainless steel.
7220.90.00Stainless Steel Narrow Band 304L
Low-carbon 304L stainless narrow bands, 0.4 mm thick and 150 mm wide, from hot-rolled stock, for packaging seals. These are flat-rolled stainless steel products under 600 mm wide, not further worked, and fall under this tariff item for other flat-rolled stainless steel.
7220.90.00Stainless Steel Slit Coil 304
Hot-rolled 304 stainless steel slit into coils, 1.5 mm thick and 450 mm wide, for fabrication. Slitting does not constitute further working, so these flat-rolled stainless products under 600 mm wide are classified as other flat-rolled stainless steel.