Of a thickness of 3 mm or more but less than 4.75 mm
Live horses, asses, mules and hinnies. > Of a thickness of 3 mm or more but less than 4.75 mm > Of a thickness of 3 mm or more but less than 4.75 mm
Duty Rate (from China)
Products classified under Tariff item 7219.23.00.00
17-4PH Precipitation Hardening Stainless Plate 3.4mm
Hot-rolled flat-rolled product of 17-4PH precipitation-hardening stainless steel, 3.4 mm thick and 1380 mm wide, not in coils and not further worked beyond hot-rolling. The thickness is within the 3 mm to less than 4.75 mm range of this tariff item.
7219.23.00316L Hot-Rolled Stainless Steel Wide Plate 3.2mm
Hot-rolled flat-rolled product of 316L low-carbon stainless steel, 3.2 mm thick and 1600 mm wide, not in coils and not further worked beyond hot-rolling. Its thickness falls within the 3 mm to less than 4.75 mm range of this tariff item.
7219.23.00321 Hot-Rolled Stainless Steel Sheet 3.7mm x 1524mm
Hot-rolled flat-rolled product of 321 titanium-stabilized stainless steel, 3.7 mm thick and 1524 mm wide, not in coils and not further worked beyond hot-rolling. The thickness is within the 3 mm to less than 4.75 mm range of this tariff item.
7219.23.00409 Hot-Rolled Stainless Steel Automotive Sheet 3.9mm
Hot-rolled flat-rolled product of 409 ferritic stainless steel, 3.9 mm thick and 1420 mm wide, not in coils and not further worked beyond hot-rolling. Its thickness falls within the 3 mm to less than 4.75 mm range of this tariff item.
7219.23.00430 Grade Hot-Rolled Stainless Steel Sheet 4mm Thick
Hot-rolled flat-rolled product of 430 ferritic stainless steel, 4 mm thick and 1400 mm wide, supplied flat and not further worked beyond hot-rolling. The thickness is within the 3 mm to less than 4.75 mm range of this tariff item.
7219.23.00AISI 304 Hot-Rolled Stainless Steel Plate 3.5mm Thick
Hot-rolled flat-rolled product of AISI 304 stainless steel, 3.5 mm thick and 1500 mm wide, not further worked beyond hot-rolling and not in coils. Its thickness falls within the 3 mm to less than 4.75 mm range of this tariff item.
7219.23.00Duplex 2205 Hot-Rolled Stainless Plate 4.5mm Thick
Hot-rolled flat-rolled product of duplex 2205 stainless steel, 4.5 mm thick and 1800 mm wide, flat non-coil delivery, not further worked beyond hot-rolling. The thickness is within the 3 mm to less than 4.75 mm range of this tariff item.
7219.23.00Hot-Rolled 17-4 PH Stainless Steel Sheet 3.75mm
Hot-rolled flat-rolled product of 17-4 PH precipitation-hardening stainless steel, 3.75 mm thick and over 600 mm wide, not in coils and not further worked than hot-rolling. This thickness falls within the 3 mm to less than 4.75 mm range specified for this tariff item.
7219.23.00Hot-Rolled 304 Stainless Steel Plate 3.5mm Thick
Hot-rolled flat-rolled product of 304 austenitic stainless steel, 3.5 mm thick and over 600 mm wide, not in coils and not further worked beyond hot-rolling. Its thickness places it squarely in the 3 mm to less than 4.75 mm range of this tariff item.
7219.23.00Hot-Rolled 310 Stainless Steel Plate 4.2mm Thick
Hot-rolled flat-rolled product of 310 heat-resistant stainless steel, 4.2 mm thick and over 600 mm wide, not in coils and not further worked beyond hot-rolling. The thickness is within the 3 mm to less than 4.75 mm range specified for this tariff item.
7219.23.00Hot-Rolled 316L Stainless Steel Sheet 4mm Thick
Hot-rolled flat-rolled product of 316L low-carbon stainless steel, 4 mm thick and over 600 mm wide, not in coils and not further worked beyond hot-rolling. Its thickness falls within the 3 mm to less than 4.75 mm range of this tariff item.
7219.23.00Hot-Rolled 409 Stainless Steel Sheet 4.5mm Thick
Hot-rolled flat-rolled product of 409 ferritic stainless steel, 4.5 mm thick and over 600 mm wide, not in coils and not further worked beyond hot-rolling. The thickness is within the 3 mm to less than 4.75 mm range of this tariff item.
7219.23.00Hot-Rolled Duplex 2205 Stainless Steel Plate 3.2mm
Hot-rolled flat-rolled product of duplex 2205 stainless steel, 3.2 mm thick and over 600 mm wide, not in coils and not further worked beyond hot-rolling. Its thickness falls within the 3 mm to less than 4.75 mm range of this tariff item.
7219.23.00Type 321 Hot-Rolled Stainless Steel Mill Plate 3.25mm
Hot-rolled flat-rolled product of 321 titanium-stabilized stainless steel, 3.25 mm thick and over 600 mm wide, not in coils and not further worked beyond hot-rolling. The thickness is within the 3 mm to less than 4.75 mm range of this tariff item.
7219.23.00Type 430 Hot-Rolled Stainless Steel Sheet 3.8mm Thick
Hot-rolled flat-rolled product of 430 ferritic stainless steel, 3.8 mm thick and over 600 mm wide, not in coils and not further worked beyond hot-rolling. Its thickness falls within the 3 mm to less than 4.75 mm range of this tariff item.