304L Hot-Rolled Stainless Steel Coil 0.8mm
A hot-rolled coil of 304L low-carbon stainless steel, 0.8 mm thick and 1000 mm wide, not further worked. The low carbon content (≤0.03%) and chromium ≥18% make it stainless steel per Chapter 72. Its thin gauge and coil form place it under tariff item 7219.14.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the coil is cold-rolled after hot-rolling
Cold-rolled stainless products of thickness 0.5 mm or more but not exceeding 1 mm are classified in heading 7219.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the product is not pickled, annealed, or otherwise surface-treated beyond hot-rolling, as such processing may change classification
• Provide a certificate of analysis confirming chromium ≥10.5% and carbon ≤1.2% for stainless steel status
• Ensure the coil width exceeds 600 mm to meet the flat-rolled product definition
Related Products under Tariff item 7219.14.00
15-5 PH Hot-Rolled Stainless Coil 1.9mm
A hot-rolled coil of 15-5 PH precipitation-hardening stainless steel, 1.9 mm thick, supplied in coil form without further working. This martensitic grade contains at least 10.5% chromium and 1.2% or less carbon, meeting the definition of stainless steel in Chapter 72. Its thickness below 3 mm and coil format place it under tariff item 7219.14.00.
17-4 PH Hot-Rolled Stainless Coil 2.0mm
A hot-rolled coil of 17-4 PH precipitation-hardening stainless steel, 2 mm thick, in wide format, not further worked. This grade contains chromium and nickel, qualifying as stainless steel under Chapter 72 definitions. The coil's thickness under 3 mm and hot-rolled condition match tariff item 7219.14.00.
310 Hot-Rolled Stainless Coil 1.0mm Thick
A hot-rolled coil of 310 stainless steel, 1 mm thick and over 600 mm wide, not further worked. This austenitic grade contains 24-26% chromium and 19-22% nickel, meeting stainless steel definitions. The coil's thickness under 3 mm and hot-rolled condition align with tariff item 7219.14.00.
316L Hot-Rolled Stainless Coil 2.9mm Thick
A hot-rolled coil of 316L low-carbon stainless steel, 2.9 mm thick, in wide format, not further worked. This molybdenum-bearing austenitic grade contains 16-18% chromium and 10-14% nickel, qualifying as stainless steel. Its thickness just under 3 mm and coil form place it under tariff item 7219.14.00.
321 Stabilized Hot-Rolled Stainless Coil 1.8mm
A hot-rolled coil of 321 stabilized stainless steel, 1.8 mm thick and 1500 mm wide, free of further surface treatments. This titanium-stabilized austenitic grade contains chromium and nickel, meeting stainless steel definitions. The coil's thickness under 3 mm and hot-rolled condition match tariff item 7219.14.00.
409 Hot-Rolled Stainless Steel Coil 2.8mm
A hot-rolled coil of 409 ferritic stainless steel, 2.8 mm thick and 700 mm wide, not further worked. This grade contains 10.5-11.75% chromium and ≤0.08% carbon, meeting stainless steel definitions. Its thickness under 3 mm and coil form place it under tariff item 7219.14.00.