Tin-Zinc Alloy Plated Flat Wire for Can Manufacturing
Flat non-alloy steel wire coated with an electrolytic tin-zinc alloy, measuring 0.5 mm by 3 mm, used for high-speed coiling into beverage can tabs. The tin-zinc coating provides corrosion resistance and formability required for tab manufacturing. This product is classified under tariff item 7217.30.00 as wire of iron or non-alloy steel plated or coated with other base metals.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the coating is predominantly zinc
Wire plated or coated with zinc is classified under a separate tariff item.
If the wire is uncoated
Uncoated non-alloy steel wire falls under this heading.
If the wire is aluminum-based
Aluminum wire products are classified in Chapter 76.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the coating composition (tin-zinc alloy) and provide a mill certificate to support classification
• Ensure the wire meets Canadian food-contact safety standards if used in beverage can tabs
• Declare the exact alloy percentages to distinguish from zinc-only plated wire
Related Products under Tariff item 7217.30.00
Aluminum-Coated Low-Carbon Steel Guy Wire
Round aluminum-plated non-alloy steel wire, 3 mm in diameter, with a carbon content below 0.25%, used for utility pole guy strands. The aluminum coating provides corrosion resistance for outdoor applications. This product is classified under tariff item 7217.30.00 as wire of iron or non-alloy steel plated or coated with other base metals.
Aluminum-Plated Flat Low-Carbon Steel Wire
Aluminum-plated flat low-carbon steel wire, hot-dip aluminum coated, measuring 1.5 mm by 7 mm. Used for heat-resistant structural clips in automotive exhaust systems. This product is classified under tariff item 7217.30.00 as wire of iron or non-alloy steel, plated or coated with other base metals.
Aluminum-Plated Flat Steel Wire for Heat Exchangers
Aluminum-plated flat steel wire for heat exchangers, hot-dip coated with aluminum for high heat resistance. This non-alloy steel wire is plated with a base metal (aluminum) and has a flat cross-section, falling under tariff item 7217.30.00.
Bismuth-Plated Flat Wire for Soldering
Bismuth-plated flat wire for soldering, with a low-melt bismuth coating to aid joining. This non-alloy steel flat wire is plated with bismuth, a base metal, and is classified under tariff item 7217.30.00.
Brass-Plated Flat Annealed Steel Wire for Springs
Brass-plated flat annealed steel wire for springs, electroplated with brass (copper-zinc), measuring 0.6 mm by 3.2 mm. Preconditioned for precision spring coiling in appliances, with the brass layer reducing friction. This product is classified under tariff item 7217.30.00 as wire of iron or non-alloy steel, plated or coated with other base metals.
Brass-Plated Flat Steel Wire for Jewelry Findings
Brass-plated flat steel wire for jewelry findings, plated with a copper-zinc alloy for a gold-like finish. This non-alloy steel flat wire is coated with brass, a base metal, and falls under tariff item 7217.30.00.