Nonalloy Steel Channel Section C50x25x5mm
C-shaped channel section, hot-rolled from non-alloy steel, with dimensions 50 mm height, 25 mm flange, and 5 mm thickness, used for shelving and framing. The C-profile is not a universal mill plate, cold-formed channel, or flat-rolled product, so it falls under tariff item 7216.99.00 as an other shape of non-alloy steel.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the channel is classified as an angle rather than a channel
Angles and channels are distinguished by their cross-section; a C-shape is a channel, but if the profile is L-shaped, it is an angle.
If the channel is cold-formed
Cold-formed channels are classified separately from hot-rolled channels.
If the channel is hollow and has an enclosed void
Hollow profiles are classified as tubes or pipes in Chapter 73.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the channel is hot-rolled, not cold-formed, as cold-formed channels are classified elsewhere
• Provide the exact dimensions and a cross-section drawing to the CBSA
• Verify the steel is non-alloy by providing a certificate of analysis
Related Products under Tariff item 7216.99.00
Cambered H-Pile Steel Section
A cambered H-pile steel section made of non-alloy steel, curved along its length for pre-stressed deep foundation applications. The cambering is a further working beyond simple hot-rolling, placing it under tariff item 7216.99.00 for other angles, shapes and sections of iron or non-alloy steel.
Cambered Universal Beam Section
A wide flange universal beam cambered for use as a bridge girder, made of non-alloy steel. The cambering constitutes further working beyond hot-rolling, so it falls under tariff item 7216.99.00 for other shapes and sections of iron or non-alloy steel.
Drilled C-Purlin Steel Channel
A C-shaped purlin of non-alloy steel with drilled mounting holes for roof framing in metal buildings. The drilling is a further working beyond hot-rolling, placing it under tariff item 7216.99.00 for other shapes and sections of iron or non-alloy steel.
Drilled Joist Hanger Steel Bracket
A steel bracket shape with drilled holes used to secure wooden joists to beams in flooring systems. Made of non-alloy steel, the drilling is a further working beyond hot-rolling, so it falls under tariff item 7216.99.00 for other shapes and sections.
Drilled L-Shaped Angle Iron Beam
An L-shaped structural angle of non-alloy steel with pre-drilled holes for bolted connections in construction framing. The drilling is a further working beyond hot-rolling, placing it under tariff item 7216.99.00 for other angles, shapes and sections.
Equal Leg Steel Angle 40x40x4mm
Equal leg steel angle, hot-rolled from non-alloy carbon steel, with 40mm legs and 4mm thickness. This product is an angle, shape, or section of iron or non-alloy steel, not cold-formed or further worked, and falls under tariff item 7216.99.00 as 'Other'.