Duty Rate (from China)
Products classified under Tariff item 7216.69.00.00
Cold-Finished Carbon Steel Unequal Angle 4x2x3/8 Inch
A cold-finished unequal leg angle bar made of nonalloy carbon steel, measuring 4x2 inches with a 3/8 inch thickness. It is a structural shape used in applications such as stair stringers and brackets, and falls under tariff item 7216.69.00 as an 'other' angle, shape, or section of iron or nonalloy steel, not further worked than cold-formed or cold-finished.
7216.69.00Cold-Finished Nonalloy Steel Angle Iron 3x3x1/4 Inch
A standard 3x3x1/4 inch angle iron, cold-finished from nonalloy carbon steel, used as a versatile structural shape in fabrication and construction. It qualifies under tariff item 7216.69.00 as an 'other' angle of iron or nonalloy steel, not further worked than cold-formed or cold-finished.
7216.69.00Cold-Finished Nonalloy Steel Hat Channel 6x2.5x14 Gauge
A hat-shaped channel section, 6 inches deep, 2.5 inches wide, and 14 gauge thick, cold-finished from nonalloy carbon steel. It is used in drywall framing and ceiling grids and falls under tariff item 7216.69.00 as an 'other' shape or section of iron or nonalloy steel, not further worked than cold-formed.
7216.69.00Cold-Finished Nonalloy Steel U-Channel 4x2x3/16 Inch
A U-shaped channel section measuring 4 inches deep by 2 inches wide with a 3/16 inch thickness, cold-finished from nonalloy steel. It is used in structural and framing applications and qualifies under tariff item 7216.69.00 as an 'other' shape or section of iron or nonalloy steel, not further worked than cold-formed.
7216.69.00Cold-Finished Steel Slotted Angle 1x1x1/16 Inch
A pre-slotted equal angle for shelving, measuring 1x1 inch with a 1/16 inch thickness, cold-finished from nonalloy steel. The slots are considered minimal working, so it falls under tariff item 7216.69.00 as an 'other' angle of iron or nonalloy steel, not further worked than cold-formed.
7216.69.00Cold-Formed Carbon Steel L-Angle 2x2x1/4 Inch
A 2x2 inch L-shaped angle bar with a 1/4 inch thickness, made from nonalloy carbon steel and produced via cold-forming. It is used in light structural applications and falls under tariff item 7216.69.00 as an 'other' angle of iron or nonalloy steel, not further worked than cold-formed.
7216.69.00Cold-Formed Carbon Steel Z-Purlin 8 Inch
A Z-shaped purlin profile, 8 inches deep, cold-formed from nonalloy steel for roofing and wall support systems. It provides superior load distribution in metal buildings and falls under tariff item 7216.69.00 as an 'other' shape or section of iron or nonalloy steel, not further worked than cold-formed.
7216.69.00Cold-Formed Nonalloy Steel Furring Channel 7/8 Inch
A hat-shaped furring channel, 7/8 inch deep, cold-formed from nonalloy carbon steel for wall leveling in drywall applications. It falls under tariff item 7216.69.00 as an 'other' shape or section of iron or nonalloy steel, not further worked than cold-formed.
7216.69.00Cold-Formed Steel C-Purlin 10 Inch Depth
A C-shaped purlin with a 10 inch depth, cold-formed from nonalloy steel for structural roof support in pre-engineered metal buildings. It is not hollow and falls under tariff item 7216.69.00 as an 'other' shape or section of iron or nonalloy steel, not further worked than cold-formed.
7216.69.00Cold-Formed Steel Lip Channel 3x1.25x12 Gauge
A lipped C-channel profile with a 3 inch height, 1.25 inch lip, and 12 gauge thickness, cold-formed from nonalloy steel. It is popular for stud framing in commercial construction and falls under tariff item 7216.69.00 as an 'other' shape or section of iron or nonalloy steel, not further worked than cold-formed.
7216.69.00Cold-Formed Steel Super-Strut Channel 1-5/8x1-5/8 Inch
A Super-Strut style channel with a 1-5/8 inch square profile, cold-formed from nonalloy steel for pipe and electrical supports. It is an industrial support standard and falls under tariff item 7216.69.00 as an 'other' shape or section of iron or nonalloy steel, not further worked than cold-formed.
7216.69.00Cold-Rolled Carbon Steel J-Section 4 Inch
A J-shaped section, 4 inches high, cold-rolled from nonalloy steel for jamb and trim applications in door and window framing. It falls under tariff item 7216.69.00 as an 'other' shape or section of iron or nonalloy steel, not further worked than cold-formed.
7216.69.00Cold-Rolled Nonalloy Steel Equal Leg Angle 1.5x1.5x1/8 Inch
An equal leg L-angle with 1.5x1.5 inch legs and a 1/8 inch thickness, cold-rolled from nonalloy carbon steel. It is used in light framing and racking systems and falls under tariff item 7216.69.00 as an 'other' angle of iron or nonalloy steel, not further worked than cold-formed.
7216.69.00Cold-Rolled Steel Omega Profile 2 Inch
An omega-shaped (Ω) profile, 2 inches wide, cold-rolled from nonalloy steel for ceiling suspension systems. It provides grid support in commercial interiors and falls under tariff item 7216.69.00 as an 'other' shape or section of iron or nonalloy steel, not further worked than cold-formed.
7216.69.00Cold-Rolled Steel T-Section 3x3x5/16 Inch
A T-shaped structural section with a 3 inch flange, 3 inch height, and 5/16 inch web thickness, cold-rolled from carbon nonalloy steel. It is used for beam support and falls under tariff item 7216.69.00 as an 'other' shape or section of iron or nonalloy steel, not further worked than cold-formed.