Other
Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. > Other: > Other
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7214.99
Forged Flat Steel Bar 3x1/2 inch
A flat bar of non-alloy steel, forged to dimensions of 3 inches by 1/2 inch, with no further working beyond the forging process. It is classified under this tariff item as an 'other' bar of iron or non-alloy steel, not further worked than forged, and not falling into more specific categories.
7214.99.00Forged Hot Steel Anchor Rod Blank
A non-alloy steel rod, forged hot to serve as an anchor rod blank, in an unfinished state. It is classified under this tariff item as an 'other' bar or rod of iron or non-alloy steel, not further worked than hot forging, and not otherwise specified.
7214.99.00Forged Low-Carbon Steel Round Bar 200mm Diameter
A large-diameter round bar of non-alloy steel containing less than 0.25% carbon, produced by forging and not further worked beyond hot-rolling. It is used primarily in heavy construction for structural supports and piling applications, and falls under tariff item 7214.99.00 as other bars and rods of iron or non-alloy steel.
7214.99.00Forged Mild Steel Round Rod 90 mm Diameter
A forged mild steel round rod, 90 mm in diameter, made of non-alloy steel with less than 0.25% carbon. It is hot-rolled or forged and not further worked, making it suitable as structural forging stock. This product falls under tariff item 7214.99.00 as other bars and rods of iron or non-alloy steel.
7214.99.00Forged Nonalloy Steel Lath Strip Bar
A lath strip bar made of non-alloy steel, produced by forging, with no additional working. It is classified under this tariff item as an 'other' bar of iron or non-alloy steel, not further worked than forging, and not covered by more specific headings.
7214.99.00Forged Nonalloy Steel Round Rod 120 mm Diameter
A forged non-alloy steel round rod, 120 mm in diameter, with less than 0.25% carbon. It is suitable for heavy-duty shafts in industrial equipment and is not further worked beyond forging or hot-rolling. This product is classified under tariff item 7214.99.00 as other bars and rods of iron or non-alloy steel.
7214.99.00Forged Nonalloy Steel Round Rod 50mm
A forged round rod of non-alloy steel with a carbon content below 0.25%, measuring 50 mm in diameter. It is used in machinery components and has not been further worked beyond forging or hot-rolling. This product falls under tariff item 7214.99.00 as an 'other' bar or rod of iron or non-alloy steel.
7214.99.00Forged Steel Billet Bar 4x4 inch
A square bar of non-alloy steel, forged to 4x4 inch dimensions, intended as machining stock, with no further processing. It is classified under this tariff item as an 'other' bar of iron or non-alloy steel, not further worked than forging, and not otherwise specified.
7214.99.00Hot-Drawn Mild Steel Dowel Rod
A mild steel dowel rod, hot-drawn with a plain finish, not further worked. It is classified under this tariff item as an 'other' bar or rod of iron or non-alloy steel, not further worked than hot-drawing, and not falling into more specific categories.
7214.99.00Hot-Drawn Mild Steel Round 8mm
A hot-drawn mild steel round bar with a carbon content below 0.25%, measuring 8 mm in diameter. It is commonly used for fasteners and fixtures due to its excellent ductility. This product is classified under tariff item 7214.99.00 as it is not further worked beyond hot-drawing.
7214.99.00Hot-Drawn Nonalloy Steel Rod 10mm
A 10mm round rod of non-alloy steel, hot-drawn without subsequent cold operations or surface treatments. It is classified under this tariff item as an 'other' rod of iron or non-alloy steel, not further worked than hot-drawing, and not otherwise specified.
7214.99.00Hot-Drawn Nonalloy Steel Round 140 mm Diameter
A hot-drawn round bar of non-alloy steel with less than 0.25% carbon, 140 mm in diameter, used for construction supports. It is not further worked beyond hot-drawing and is classified under tariff item 7214.99.00 as other bars and rods of iron or non-alloy steel.
7214.99.00Hot-Extruded Low Carbon Steel Bar 20mm
A hot-extruded round bar of low-carbon non-alloy steel with a carbon content below 0.25%, measuring 20 mm in diameter. It is used for automotive shafting and has not been further worked beyond hot-extrusion. This product falls under tariff item 7214.99.00 as an 'other' bar or rod.
7214.99.00Hot-Extruded Low Carbon Steel Round Bar 80 mm
A hot-extruded round bar of iron or non-alloy steel with less than 0.25% carbon, 80 mm in diameter, used for manufacturing large pins and axles. It is not further worked beyond extrusion and falls under tariff item 7214.99.00 as other bars and rods of iron or non-alloy steel.
7214.99.00Hot-Extruded Nonalloy Steel Armature Rod
An armature blank rod of non-alloy steel, produced by hot-extrusion, with no further working. It is classified under this tariff item as an 'other' bar or rod of iron or non-alloy steel, not further worked than hot-extrusion, and not covered by more specific headings.
7214.99.00Hot-Extruded Round Steel Rod 20mm Diameter
A 20mm diameter round rod of non-alloy steel, produced by hot-extrusion, without further working such as coating or cold-drawing. It is classified under this tariff item as an 'other' rod of iron or non-alloy steel, not further worked than hot-extrusion, and not otherwise specified.
7214.99.00Hot-Extruded Steel Shaft Blank Rod
A non-alloy steel rod, hot-extruded as a shaft blank for machinery, without coatings or cold-finishing. It is classified under this tariff item as an 'other' rod of iron or non-alloy steel, not further worked than hot-extrusion, and not falling into more specific categories.
7214.99.00Hot-Rolled Grating Bar Stock 35mm
A 35 mm round hot-rolled low-carbon steel bar used for floor grating fabrication. It supplies bearing bars for industrial walkways and has not been further worked beyond hot-rolling. This product is classified under tariff item 7214.99.00 as an 'other' bar or rod of non-alloy steel.
7214.99.00Hot-Rolled Low Carbon Round Shafting Stock 130 mm
A hot-rolled round shafting stock bar of non-alloy steel with less than 0.25% carbon, 130 mm in diameter, for turning into finished shafts. It is not further worked beyond hot-rolling and is classified under tariff item 7214.99.00 as other bars and rods of iron or non-alloy steel.
7214.99.00Hot-Rolled Low-Carbon Steel Round Bar 100 mm Diameter
A forged, hot-rolled round bar of non-alloy steel with less than 0.25% carbon and a diameter of 100 mm, used in structural applications like machinery bases. It is not further worked and falls under tariff item 7214.99.00 as other bars and rods of iron or non-alloy steel.
7214.99.00Hot-Rolled Low-Carbon Steel Round Bar 12mm
A hot-rolled round bar of non-alloy steel with a carbon content below 0.25% and a diameter of 12 mm. It is suitable for general structural fabrication and has not been further worked beyond hot-rolling. This product falls under tariff item 7214.99.00 as an 'other' bar or rod.
7214.99.00Hot-Rolled Machinery Shafting Steel Round 25mm
A 25 mm diameter hot-rolled round of low-carbon non-alloy steel used for shafting in industrial machinery. It offers good machinability without further finishing and has not been worked beyond hot-rolling. This product is classified under tariff item 7214.99.00 as an 'other' bar or rod.
7214.99.00Hot-Rolled Mild Steel Round Bar 1 inch
A 1-inch diameter mild (non-alloy) steel round bar, hot-rolled for general fabrication use, with no further working. It is classified under this tariff item as an 'other' bar of iron or non-alloy steel, not further worked than hot-rolling, and not otherwise specified.
7214.99.00Hot-Rolled Nonalloy Steel Billet Rod
A rectangular billet-style rod of non-alloy steel, hot-rolled for use as forging stock, with no further working. It is classified under this tariff item as an 'other' rod of iron or non-alloy steel, not further worked than hot-rolling, and not covered by more specific headings.
7214.99.00Hot-Rolled SAE 1010 Steel Round Bar 110 mm
An SAE 1010 grade non-alloy steel hot-rolled round bar, 110 mm in diameter, typically containing 0.08-0.13% carbon, for automotive and machinery applications. It is not further worked and is classified under tariff item 7214.99.00 as other bars and rods of iron or non-alloy steel.
7214.99.00Hot-Rolled Scaffolding Pipe Stock Round 55mm
A 55 mm solid round hot-rolled low-carbon steel bar used as stock for scaffolding components. It serves as a basis for coupler and pin machining and has not been further worked beyond hot-rolling. This product falls under tariff item 7214.99.00 as an 'other' bar or rod.
7214.99.00Hot-Rolled Square Steel Bar 1/2 inch
A 1/2 inch square cross-section bar of non-alloy steel, produced via hot-rolling, not subjected to further working beyond twisting after rolling. It is classified under this tariff item as an 'other' bar of iron or non-alloy steel, not further worked than hot-rolling, including those twisted after rolling.
7214.99.00Low Carbon Anchor Rod Stock 60mm
A 60 mm diameter hot-rolled low-carbon steel round used for anchor rod manufacturing. It is a common precursor for foundation anchors and has not been further worked beyond hot-rolling. This product is classified under tariff item 7214.99.00 as an 'other' bar or rod.
7214.99.00Low Carbon Chain Link Fence Post Stock 45mm
A 45 mm diameter hot-rolled round of low-carbon steel used for chain link fence post manufacturing. It provides strength for outdoor fencing and has not been further worked beyond hot-rolling. This product falls under tariff item 7214.99.00 as an 'other' bar or rod.
7214.99.00Low-Carbon Hot-Rolled Round Steel Bar 152 mm
A hot-rolled round bar of non-alloy steel with less than 0.25% carbon, maximum 152 mm in diameter, for heavy machinery components. It is not further worked and falls under tariff item 7214.99.00 as other bars and rods of iron or non-alloy steel.
7214.99.00Low-Carbon Structural Steel Round Bar 40mm
A hot-rolled round bar for structural use, made of non-alloy steel with a carbon content below 0.25% and a diameter of 40 mm. It meets ASTM A36 equivalent specifications for construction beams and has not been further worked beyond hot-rolling. This product is classified under tariff item 7214.99.00.
7214.99.00Low Carbon Tamping Bar Round 65mm
A 65 mm diameter hot-rolled low-carbon round used for concrete tamping bars. It is durable for construction compaction tools and has not been further worked beyond hot-rolling. This product falls under tariff item 7214.99.00 as an 'other' bar or rod.
7214.99.00Mild Steel Dowel Rod 15mm Diameter
A 15 mm hot-rolled mild steel round rod used for dowel pins in construction joints. It provides a precise fit without machining and has not been further worked beyond hot-rolling. This product is classified under tariff item 7214.99.00 as an 'other' bar or rod.
7214.99.00Mild Steel Handrail Round Bar 18mm
An 18 mm hot-rolled mild steel round bar for architectural handrails. It has a smooth surface ideal for exposed applications and has not been further worked beyond hot-rolling. This product falls under tariff item 7214.99.00 as an 'other' bar or rod.
7214.99.00Nonalloy Steel Rebar Tie Wire Rounds 10mm
A 10 mm hot-drawn round of low-carbon steel used for rebar tie wire production. It offers high ductility essential for tying reinforcement and has not been further worked beyond hot-drawing. This product is classified under tariff item 7214.99.00 as an 'other' bar or rod.
7214.99.00Nonalloy Steel Round Bar 76 mm Exact Diameter
A hot-rolled round bar of non-alloy steel with less than 0.25% carbon, precisely 76 mm in diameter, for precision structural use. It is not further worked and is classified under tariff item 7214.99.00 as other bars and rods of iron or non-alloy steel.
7214.99.00Twisted Hot-Rolled Hexagonal Steel Bar
A hexagonal profile non-alloy steel bar, hot-rolled and twisted after rolling, without additional processing. It is classified under this tariff item as an 'other' bar of iron or non-alloy steel, not further worked than hot-rolling, including those twisted after rolling, and not otherwise specified.
7214.99.00Twisted Hot-Rolled Rebar Alternative Bar
A twisted hot-rolled bar of non-alloy steel, not of the reinforcing type, with no further working. It is classified under this tariff item as an 'other' bar of iron or non-alloy steel, not further worked than hot-rolling, including those twisted after rolling, and not covered by more specific headings.
7214.99.00Twisted Hot-Rolled Steel Rod 30mm
A hot-rolled low-carbon steel rod twisted after rolling, measuring 30 mm in diameter, used for ornamental railings. The twisting provides aesthetic appeal and the product has not been further worked beyond twisting. This product falls under tariff item 7214.99.00 as it is explicitly included in the heading description.
7214.99.00Twisted Square Steel Deformed Bar
A square non-alloy steel bar, hot-rolled, twisted, and deformed for grip applications, with no further working. It is classified under this tariff item as an 'other' bar of iron or non-alloy steel, not further worked than hot-rolling, including those twisted after rolling, and not otherwise specified.