Of a diameter exceeding 25.5 mm
Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. > Other: > Other > Of circular cross section, containing by weight less than 0.25% of carbon: > Of a diameter exceeding 25.5 mm
Duty Rate (from China)
Products classified under Tariff item 7213.99.00.1
1008 Deep Drawing Steel Coil Rod
AISI 1008 deep drawing steel coil rod, made from extra-low carbon non-alloy steel. It is supplied in irregularly wound coils and is optimized for deep drawing applications. This product is classified under tariff item 7213.99.00 as other hot-rolled bars and rods of iron or non-alloy steel, in irregular coils.
7213.99.001010 Steel Hot-Rolled Irregular Coil
AISI 1010 steel hot-rolled irregular coil, made from ultra-low carbon non-alloy steel. It is supplied in irregularly wound coils and is used for deep drawing and welding wire applications. This product falls under tariff item 7213.99.00 as other hot-rolled bars and rods of iron or non-alloy steel, in irregular coils.
7213.99.0015.5mm Hot-Rolled S235JR Nonalloy Steel Coil
EN standard S235JR structural steel, hot-rolled into 15.5 mm diameter rods in irregular coils, non-alloy steel. This product falls under tariff item 7213.99.00 as "Other" hot-rolled non-alloy steel bars and rods in coils, not meeting the definitions for specific subheadings like concrete reinforcing bars.
7213.99.0016mm Hot-Rolled Mild Steel Rebar Precursor Coil
Smooth hot-rolled mild steel rod in irregularly wound coils, 16 mm diameter, non-alloy composition. This product falls under tariff item 7213.99.00 as "Other" hot-rolled non-alloy steel bars and rods in coils, not qualifying as concrete reinforcing bar due to lack of deformations.
7213.99.00A36 Hot-Rolled Merchant Bar Coil
Hot-rolled bars and rods of non-alloy steel, ASTM A36 grade, in irregularly wound coils. Used for general construction, rivets, and joists. This product falls under tariff item 7213.99.00 as "Other" hot-rolled non-alloy steel bars and rods in coils, not meeting the definitions for specific subheadings like concrete reinforcing bars.
7213.99.00A36 Hot-Rolled Mild Steel Rod Coil 22mm
A36 hot-rolled mild steel rod coil, 22 mm in diameter, made from non-alloy steel conforming to ASTM A36. It is supplied in irregularly wound coils and is used for general construction and fabrication. This product falls under tariff item 7213.99.00 as other hot-rolled bars and rods of iron or non-alloy steel, in irregular coils.
7213.99.00A36 Hot-Rolled Structural Coil Rod
A36 hot-rolled structural coil rod, made from non-alloy steel conforming to ASTM A36. It is supplied in irregularly wound coils and is used for structural welding and bolting applications. This product is classified under tariff item 7213.99.00 as other hot-rolled bars and rods of iron or non-alloy steel, in irregular coils.
7213.99.00AISI 1018 Hot-Rolled Steel Coil
Hot-rolled bars and rods of low-carbon non-alloy steel (AISI 1018) in irregularly wound coils. Typically used for general fabrication and machining. This product falls under tariff item 7213.99.00 as "Other" hot-rolled non-alloy steel bars and rods in coils, not meeting the definitions for specific subheadings like concrete reinforcing bars.
7213.99.00AISI 1018 Hot-Rolled Steel Coil Rod
AISI 1018 hot-rolled steel coil rod, made from low-carbon non-alloy steel. It is supplied in irregularly wound coils and is typically used for general fabrication and machining. This product falls under tariff item 7213.99.00 as other hot-rolled bars and rods of iron or non-alloy steel, in irregular coils.
7213.99.00AISI 1045 Carbon Steel Hot-Rolled Coil Rod 15mm
Medium carbon steel (AISI 1045) hot-rolled in irregularly wound coils, circular cross section of 15 mm diameter, non-alloy steel. This product falls under tariff item 7213.99.00 as "Other" hot-rolled non-alloy steel bars and rods in coils, not meeting the definitions for specific subheadings like concrete reinforcing bars.
7213.99.00ASTM A510 17mm Grade 1006 Steel Coil Rod
Hot-rolled carbon steel Grade 1006 per ASTM A510, in coil form with 17 mm round cross section, non-alloy steel. This product falls under tariff item 7213.99.00 as "Other" hot-rolled non-alloy steel bars and rods in coils, not meeting the definitions for specific subheadings like concrete reinforcing bars.
7213.99.00ASTM A510 Carbon Steel Rod Coil
Hot-rolled carbon steel rods in irregularly wound coils, compliant with ASTM A510, for general engineering. This product falls under tariff item 7213.99.00 as "Other" hot-rolled non-alloy steel bars and rods in coils, not meeting the definitions for specific subheadings like concrete reinforcing bars.
7213.99.00Carbon Steel HRPC 8-20mm Coils
Hot-rolled plain carbon steel coil rods (HRPC) with diameters from 8 to 20 mm, in irregular winds, used as rebar feedstock. This product falls under tariff item 7213.99.00 as "Other" hot-rolled non-alloy steel bars and rods in coils, lacking ribs or indentations that would classify it as concrete reinforcing bar.
7213.99.00Commercial Quality HR Rod Coil
Commercial quality hot-rolled rod coil, made from non-alloy steel. It is supplied in irregularly wound coils and is used for manufacturing nails and staples. This product is classified under tariff item 7213.99.00 as other hot-rolled bars and rods of iron or non-alloy steel, in irregular coils.
7213.99.00General Purpose HR Coil Rod 12mm
12mm general purpose hot-rolled carbon steel rod in irregular coils for fencing and mesh production. This product falls under tariff item 7213.99.00 as "Other" hot-rolled non-alloy steel bars and rods in coils, not meeting the definitions for specific subheadings like concrete reinforcing bars.
7213.99.00General Structural Hot-Rolled Rod Coil
General structural hot-rolled rod coil, made from non-alloy steel. It is supplied in irregularly wound coils and is used for structural fabrications and repairs. This product falls under tariff item 7213.99.00 as other hot-rolled bars and rods of iron or non-alloy steel, in irregular coils.
7213.99.00Grade 33 Hot-Rolled Coil Rod
ASTM A615 Grade 33 hot-rolled coil rod, made from low-carbon non-alloy steel. It is supplied in irregularly wound coils and is used as intermediate reinforcement prior to deformation into rebar. This product is classified under tariff item 7213.99.00 as other hot-rolled bars and rods of iron or non-alloy steel, in irregular coils.
7213.99.00Hot-Rolled Carbon Steel Rebar Precursor Coil 32mm
Hot-rolled carbon steel rebar precursor coil rod, 32 mm in diameter, made from non-alloy steel. It is supplied in irregularly wound coils and serves as feedstock for producing concrete reinforcing bars. This product is classified under tariff item 7213.99.00 as other hot-rolled bars and rods of iron or non-alloy steel, in irregular coils.
7213.99.00Hot-Rolled SAE 1018 Steel Coil Rod 16mm Diameter
Hot-rolled bars and rods of non-alloy steel in irregularly wound coils with a circular cross section measuring 16 mm in diameter. This product falls under tariff item 7213.99.00 as "Other" hot-rolled non-alloy steel bars and rods in coils, not meeting the definitions for specific subheadings like concrete reinforcing bars.
7213.99.00Hot-Rolled SAE 1018 Steel Coil Rod 25mm Diameter
Hot-rolled SAE 1018 steel coil rod, 25 mm in diameter, made from non-alloy steel. It is supplied in irregularly wound coils and is commonly used for machining and general fabrication. This product falls under tariff item 7213.99.00 as other hot-rolled bars and rods of iron or non-alloy steel, in irregular coils.
7213.99.00Industrial Hot-Rolled Rod Coil 20mm Diameter
Industrial hot-rolled rod coil, 20 mm in diameter, made from non-alloy steel. It is supplied in irregularly wound coils and is intended for industrial forging applications. This product is classified under tariff item 7213.99.00 as other hot-rolled bars and rods of iron or non-alloy steel, in irregular coils.
7213.99.00Low Carbon S235JR Hot-Rolled Steel Coil
EN 10025 S235JR grade non-alloy structural steel in hot-rolled, irregularly wound coils for construction and engineering. This product falls under tariff item 7213.99.00 as "Other" hot-rolled non-alloy steel bars and rods in coils, not meeting the definitions for specific subheadings like concrete reinforcing bars.
7213.99.00Low Carbon Steel Merchant Rod Coil
Low carbon steel merchant rod coil, made from non-alloy steel. It is supplied in irregularly wound coils and is used for rebar feedstock and mesh production. This product falls under tariff item 7213.99.00 as other hot-rolled bars and rods of iron or non-alloy steel, in irregular coils.
7213.99.00Mild Steel HR Coil Rod 6mm
Mild steel hot-rolled rod coil, 6 mm in diameter, made from non-alloy steel. It is supplied in irregularly wound coils and is ideal for wire drawing and fastener production. This product is classified under tariff item 7213.99.00 as other hot-rolled bars and rods of iron or non-alloy steel, in irregular coils.
7213.99.00Mild Steel HR Coil Rod 6mm Diameter
6mm diameter hot-rolled mild steel rods in irregular coils for wire drawing and fasteners. This product falls under tariff item 7213.99.00 as "Other" hot-rolled non-alloy steel bars and rods in coils, not meeting the definitions for specific subheadings like concrete reinforcing bars.
7213.99.00Nonalloy Steel HR Black Coil 10mm
Black oxidized surface hot-rolled 10mm non-alloy steel coils, irregularly wound for fabrication. This product falls under tariff item 7213.99.00 as "Other" hot-rolled non-alloy steel bars and rods in coils, not meeting the definitions for specific subheadings like concrete reinforcing bars.
7213.99.00Rimmed Steel HR Irregular Coil
Rimmed steel hot-rolled irregular coil, made from non-alloy steel with a rimmed quality. It is supplied in irregularly wound coils and is used for low-stress stamping applications. This product falls under tariff item 7213.99.00 as other hot-rolled bars and rods of iron or non-alloy steel, in irregular coils.
7213.99.00S235JR Hot-Rolled Merchant Bar Coil
S235JR hot-rolled merchant bar coils are non-alloy steel products supplied in irregularly wound coils, conforming to EN S235JR specifications for general engineering applications. They are classified under tariff item 7213.99.00 as 'other' hot-rolled bars and rods of iron or non-alloy steel, not being tool or heat-resisting steels. Their standard carbon content and lack of alloying elements keep them within the non-alloy steel definition of Chapter 72.
7213.99.00S275JR Hot-Rolled Nonalloy Rod Coil
S275JR hot-rolled non-alloy rod coils are structural steel products in irregular coils, meeting EN 10025 S275JR standards for building frameworks. They are classified under tariff item 7213.99.00 as 'other' hot-rolled bars and rods of iron or non-alloy steel, as they do not meet the thresholds for high-strength or alloy steel. The product's composition and form align with the non-alloy steel definitions in Chapter 72.
7213.99.00SAE 1020 Hot-Rolled Coil Rod
Hot-rolled mild steel rods (SAE 1020) in irregularly wound coils, ideal for bolts, shafts, and structural components. This product falls under tariff item 7213.99.00 as "Other" hot-rolled non-alloy steel bars and rods in coils, not meeting the definitions for specific subheadings like concrete reinforcing bars.
7213.99.00SAE 1045 Medium Carbon HR Coil
SAE 1045 medium-carbon (0.45%) non-alloy steel hot-rolled into irregular coil rods for shafts and gears. This product falls under tariff item 7213.99.00 as "Other" hot-rolled non-alloy steel bars and rods in coils, not meeting the definitions for specific subheadings like concrete reinforcing bars.
7213.99.00SAE 1045 Medium Carbon Steel Coil Rod 28mm
Hot-rolled SAE 1045 medium carbon steel coil rod, 28 mm in diameter, made from non-alloy steel. It is supplied in irregularly wound coils and is suitable for manufacturing axles, pins, and mechanical components. This product falls under tariff item 7213.99.00 as other hot-rolled bars and rods of iron or non-alloy steel, in irregular coils.
7213.99.00Weldable Grade HR Coil Rod
Weldable grade hot-rolled coil rods are low-carbon non-alloy steel products in irregular coils, designed for welding applications in machinery. They fall under tariff item 7213.99.00 as 'other' hot-rolled bars and rods of iron or non-alloy steel, since they lack alloying elements like molybdenum that would shift classification. Their composition and form meet the non-alloy steel definitions of Chapter 72.