Chapter 7213 — Customs Tariff Headings

13mm HRB335 Deformed Steel Rebar Coil

Hot-rolled deformed steel rebar coil, 13mm diameter, with transverse and longitudinal ribs produced during the rolling process. This product meets the definition of bars and rods, hot-rolled, in irregularly wound coils, containing indentations, ribs, grooves or other deformations, and is used for concrete reinforcement.

20mm Grade 420D Rebar Coil

Grade 420D deformed reinforcing bar, 20mm diameter, hot-rolled in irregular coils with a spiral rib pattern. This product is classified under tariff item 7213.10.00 as it is a hot-rolled bar in irregularly wound coils with deformations produced during rolling, used for concrete reinforcement.

8mm Y1020 Deformed Rebar Coil

Small diameter 8mm Y1020 carbon steel deformed rebar in hot-rolled irregular coils with surface grooves and ribs. This product falls under tariff item 7213.10.00 as it is a hot-rolled bar in irregularly wound coils with deformations produced during rolling, suitable for concrete slab and masonry reinforcement.

Deformed Rebar Coil 10mm Grade 40

Hot-rolled deformed steel rebar in irregularly wound coils, 10mm diameter, grade 40 with a minimum yield strength of 40,000 psi. Features ribs and indentations produced during rolling for superior concrete bond, qualifying under tariff item 7213.10.00.

Grade 75 HRB400 Rebar Coil 16mm

High-strength HRB400 deformed rebar coil, 16mm diameter with pronounced rib deformations from hot rolling. This product is classified under tariff item 7213.10.00 as a hot-rolled bar in irregularly wound coils with deformations, used in high-rise concrete construction.

Ribbed Rebar Coil 12mm Grade 60 ASTM A615

ASTM A615 Grade 60 concrete reinforcing bar, 12mm diameter, hot-rolled with a continuous rib pattern in irregular coils. This product falls under tariff item 7213.10.00 as it is a hot-rolled bar in irregularly wound coils with deformations produced during rolling, designed for reinforced concrete structures.

1.0718 German Free-Cutting Steel Coil

DIN 1.0718 (11SM30) is a German free-cutting non-alloy steel with a sulfur-enhanced composition for chip-breaking, supplied as hot-rolled irregularly wound coils. It is widely used in hydraulic fittings and automotive fasteners where machinability is critical. This product falls under tariff item 7213.20.00 as 'other' free-cutting steel, distinct from leaded variants.

AISI 1137 Free-Machining Steel Coil

AISI 1137 is a resulfurized free-cutting steel, meaning it contains added sulfur to improve machinability. This hot-rolled, irregularly wound coil is a bar or rod product of non-alloy steel, which falls under tariff item 7213.20.00 as 'other, of free-cutting steel.' It is commonly used for manufacturing studs, bolts, and gears where good machinability is required.

AISI 11L41 Leaded Resulfurized Steel Coil Stock

AISI 11L41 is a leaded, resulfurized free-cutting steel with higher manganese and sulfur for enhanced machinability. This hot-rolled, irregularly wound coil is a non-alloy steel product that falls under tariff item 7213.20.00, covering free-cutting steel bars and rods. It is used for manufacturing studs and cap screws.

AISI 12L14 Free-Machining Steel Coil

AISI 12L14 is a leaded free-cutting steel, containing lead to enhance machinability. This hot-rolled, irregularly wound coil is a non-alloy steel product that fits tariff item 7213.20.00, which covers bars and rods of free-cutting steel. It is widely used for precision machining applications such as screws and fittings.

AISI 12L14 Lead-Free-Cutting Steel Coil

AISI 12L14 is a lead-free free-cutting non-alloy steel with a bismuth addition for enhanced machinability, supplied as hot-rolled irregularly wound coils. It is commonly used in precision machining applications where lead content is restricted. This product is classified under tariff item 7213.20.00 as 'other' free-cutting steel, covering bismuth-enhanced variants.

DIN 1.0715 11SMn30 Free-Cutting Steel Coil

DIN 1.0715 (11SMn30) is a sulfur-manganese free-cutting steel, designed for high machinability. This hot-rolled, irregularly wound coil is a non-alloy steel product that falls under tariff item 7213.20.00 for free-cutting steel bars and rods. It is commonly used for precision parts like worms and spindles.

EN 1.0736 Leaded Free-Cutting Steel Coil 11SMnPb30

EN 1.0736 (11SMnPb30) is a leaded free-cutting steel with manganese sulfide inclusions for exceptional machinability. This hot-rolled, irregularly wound coil is a non-alloy steel product that falls under tariff item 7213.20.00, covering free-cutting steel bars and rods. It is commonly imported for screw machine production.

EN1A Lead-Free Free-Cutting Steel Coil

EN1A is a sulfurized free-cutting steel, with a lead-free variant for environmental compliance. This hot-rolled, irregularly wound coil is a non-alloy steel product that fits tariff item 7213.20.00, covering free-cutting steel bars and rods. It is ideal for automatic lathe work and repetitive production of components like bushings.

EN1A Lead-Free Machining Steel Coil

EN1A is a British standard lead-free free-machining non-alloy steel, hot-rolled into irregularly wound coils for automatic lathe work. Its composition is optimized for chip control and surface finish in high-speed machining. This product falls under tariff item 7213.20.00 as 'other' free-cutting steel, covering non-leaded variants.

Grade 1144L Stressproof Leaded Steel Coil

Grade 1144L is a leaded, high-manganese free-cutting steel, similar to Stressproof, hot-rolled into irregular coils. This non-alloy steel product falls under tariff item 7213.20.00, which covers bars and rods of free-cutting steel. It is used for arbors, pinions, and other precision components.

JIS S15C Free-Cutting Steel Coil

JIS S15C is a carbon steel with added sulfur for free-cutting properties, hot-rolled into irregular coils. This non-alloy steel product falls under tariff item 7213.20.00, which covers bars and rods of free-cutting steel. It is used in Japanese automotive and machinery parts requiring good machinability.

JIS SUM22L Leaded Free-Machining Steel Coil

JIS SUM22L is a leaded free-machining steel with sulfur additions, hot-rolled into irregular coils. This non-alloy steel product falls under tariff item 7213.20.00, covering bars and rods of free-cutting steel. It is used extensively for appliance hardware and bicycle components.

Lead-Free Cutting Steel Coil for Fastener Manufacturing

This lead-free cutting steel coil is hot-rolled and irregularly wound, containing 0.1% or more lead by weight to enhance machinability. It is a non-alloy steel product that falls under tariff item 7213.20.00, covering free-cutting steel bars and rods. It is specifically used for fastener manufacturing.

SAE 1117 Free-Cutting Steel Wire Rod Coil

SAE 1117 is a resulfurized free-cutting steel, hot-rolled into irregularly wound coils suitable for wire drawing and machining. This non-alloy steel product falls under tariff item 7213.20.00, covering bars and rods of free-cutting steel. It is commonly used for cold-headed fasteners and precision components.

SAE 1117 Resulfurized Steel Coil

SAE 1117 is a resulfurized free-cutting non-alloy steel supplied as hot-rolled irregularly wound coils, offering improved surface finish in machining operations. It is commonly used for studs, pins, and similar components requiring good machinability. This product is classified under tariff item 7213.20.00 as 'other' free-cutting steel.

SAE 1144 Stressproof Free-Cutting Steel Coil

SAE 1144 is a high-manganese free-cutting steel, hot-rolled into irregular coils and known for its strength after cold drawing. This non-alloy steel product falls under tariff item 7213.20.00, which covers bars and rods of free-cutting steel. It is used in applications like axles and shafts requiring machinability and strength.

SAE 1215 Free-Cutting Steel Coil

SAE 1215 is a carbon steel with high sulfur content for enhanced machinability, hot-rolled into irregularly wound coils. This non-alloy steel product falls under tariff item 7213.20.00, covering bars and rods of free-cutting steel. It is designed for high-speed machining operations.

SAE 12L14 Lead-Bearing Free-Cutting Steel Coil

SAE 12L14 is a classic lead-bearing free-cutting steel with 0.15-0.35% lead by weight for superior machinability. This hot-rolled, irregularly wound coil is a non-alloy steel product that falls under tariff item 7213.20.00, covering free-cutting steel bars and rods. It is widely used for producing precision shafts and fittings.

SUM22 Free-Cutting Carbon Steel Coil

SUM22 is a free-cutting carbon steel with optimized sulfur and phosphorus for machining, hot-rolled into irregular coils. This non-alloy steel product falls under tariff item 7213.20.00, which covers bars and rods of free-cutting steel. It is commonly used in screw machine products.

SUM22 Free-Machining Steel Coil

SUM22 is a Japanese free-cutting non-alloy steel with optimized sulfur content for screw machine operations, supplied as hot-rolled irregularly wound coils. It is designed for high-speed machining with excellent chip breakage. This product falls under tariff item 7213.20.00 as 'other' free-cutting steel.

Summit Steel 1215L Lead Added Free-Machining Coil

Summit Steel 1215L is a leaded, resulfurized free-cutting non-alloy steel supplied as hot-rolled bars and rods in irregularly wound coils. Its lead and sulfur content enhances machinability, making it ideal for high-volume production of automotive components and fasteners. This product is classified under tariff item 7213.20.00 as 'other' free-cutting steel, which includes leaded variants.

0.96% Carbon HT Tire Cord Steel Rod

Ultra-high carbon (0.96%) tire cord-quality steel wire rod, hot-rolled in irregularly wound coils with a circular cross-section measuring less than 14 mm in diameter. This non-alloy steel product is engineered for high tensile strength cords used in tire reinforcement and is not further worked or treated.

12mm CHQ Wire Rod for Construction Screws

Maximum size CHQ rod of 12 mm diameter per statistical note 3 specifications for construction lag screws, hot-rolled in irregularly wound coils with a circular cross-section under 14 mm. This non-alloy steel product has high manganese content for strength after cold heading.

AISI 1008 Low Carbon Steel Rod Coil

AISI 1008 low carbon steel rod of 12 mm circular diameter, hot-rolled in irregularly wound coils, made of non-alloy steel. It is not partly manufactured and is used for various wire drawing applications. This product is classified under tariff item 7213.91.00 as its diameter is less than 14 mm.

AWS ER70S-6 Wire Rod 5.5mm

AWS ER70S-6 specification non-alloy steel wire rod of 5.5 mm diameter in hot-rolled coils, welding quality per statistical note 4 for solid MIG wire. This product features enhanced deoxidizers for welding dirty mill scale and is classified under tariff item 7213.91.00.

Carbon Steel Rod 11.5mm Irregular Coil

Carbon steel rod of 11.5 mm diameter, hot-rolled in irregularly wound coils, made of low carbon non-alloy steel. It is not treated or tempered and is intended for drawing into agricultural fencing wire. This product meets the definition of bars and rods hot-rolled in irregularly wound coils under heading 72.13, with a circular cross-section measuring less than 14 mm.

CHQ Statistical Note 6 Wire Rod 10mm Automotive Fasteners

10mm CHQ wire rod certified to statistical note 3 for automotive fastener cold heading, hot-rolled in coils with a circular cross-section under 14 mm, not partly manufactured. This non-alloy steel product features tight chemistry control for OEM suspension and steering bolts.

CHQ Steel Wire Rod 6.0mm for Machine Screws

CHQ steel wire rod of 6.0 mm diameter for cold heading machine screws, hot-rolled in coils with a circular cross-section under 14 mm, not further worked or treated. This non-alloy steel product features high ductility formulation to prevent cracking during cold forming.

Cold Heading Quality (CHQ) Wire Rod 5.5mm for Fasteners

Hot-rolled CHQ steel wire rod of 5.5 mm diameter in irregularly wound coils, with a circular cross-section under 14 mm, not tempered or treated. This non-alloy steel product meets statistical note 3 specifications for cold heading quality with specific chemistry for screw production.

Cold Heading Wire Rod 8.0mm for Self-Tapping Screws

CHQ grade steel wire rod of 8.0 mm diameter for self-tapping screw production, hot-rolled in irregularly wound coils, not tempered or treated, under 14 mm limit. This non-alloy steel product features controlled phosphorus and sulfur for superior cold heading performance.

Drawing Quality Hot-Rolled Steel Rod 11mm

Drawing quality (DQ) non-alloy steel rod of 11 mm circular cross-section, hot-rolled in irregular coils. It is not tempered and is used for wire drawing applications. The product falls under tariff item 7213.91.00 because its diameter is less than 14 mm.

ER70KS Welding Rod Coil 5.5mm

ER70KS grade non-alloy steel wire rod of 5.5 mm diameter, hot-rolled in irregular coils for production of GMAW welding electrodes as per statistical note 4. This product features low sulfur and phosphorus content to ensure smooth wire drawing and welding performance.

Grade 1008 Steel Wire Rod 7mm Diameter Coil

Grade 1008 steel wire rod of 7 mm diameter, hot-rolled in irregularly wound coils, made of non-alloy steel. It is not tempered or treated and is used primarily for manufacturing fencing wire and staples. The product falls under tariff item 7213.91.00 as it has a circular cross-section measuring less than 14 mm.

Grade 1012 Steel Hot-Rolled Rod 8mm Coil

Grade 1012 steel rod of 8 mm circular cross-section, hot-rolled in irregularly wound coils, made of non-alloy steel. It is untreated and not tempered, and is used in welding wire and electrode manufacturing. This product is classified under tariff item 7213.91.00 because its diameter is less than 14 mm.

Grade 1015 Wire Rod 12mm Hot-Rolled

Grade 1015 wire rod of 12 mm diameter, hot-rolled in irregular coils, made of non-alloy steel. It is untreated and untempered, and is used for drawing mechanical spring wire. The product fits tariff item 7213.91.00 due to its circular cross-section measuring less than 14 mm.

Grade 1018 CHQ Wire Rod 9.5mm for Nuts and Bolts

SAE 1018 equivalent CHQ steel rod of 9.5 mm diameter for nut and bolt cold heading, hot-rolled in irregular coils with a circular cross-section under 14 mm, untreated. This non-alloy steel product features balanced chemistry for multi-stage cold forming.

High Carbon 0.82% C Tire Cord Steel Wire Rod

Tire cord-quality wire rod with 0.82% carbon content, hot-rolled in coils with a diameter of less than 14 mm, untempered and untreated. This non-alloy steel product is designed for direct drawing into tire reinforcement filaments and meets the statistical note criteria for tire cord-quality wire rod.

Hot-Rolled 1020 Steel Rod Coil 13mm

1020 non-alloy steel rod of 13 mm circular cross-section, hot-rolled in irregularly wound coils. It is not partly manufactured and is used for general wire drawing and manufacturing. This product is classified under tariff item 7213.91.00 as its diameter is less than 14 mm.

Hot-Rolled Mild Steel Wire Rod 10mm Coil

Mild steel (non-alloy) wire rod of 10 mm circular cross-section, hot-rolled in irregularly wound coils. It is not tempered and is used for various wire drawing applications. The product falls under tariff item 7213.91.00 because its diameter is less than 14 mm.

Hot-Rolled Mild Steel Wire Rod 5.5mm Diameter

Hot-rolled wire rod of non-alloy steel in irregularly wound coils, with a circular cross-section of 5.5 mm diameter. It is not tempered, treated, or partly manufactured, and is the basic form used for drawing into wire. This product is classified under tariff item 7213.91.00 as its diameter is less than 14 mm.

Hot-Rolled SAE 1018 Steel Wire Rod Coil

Hot-rolled wire rod of non-alloy steel with a circular cross-section under 14 mm diameter, supplied in irregularly wound coils. It is not tempered or treated and is used for general wire drawing applications. This product is classified under tariff item 7213.91.00.

Industrial Grade Hot-Rolled Wire Rod Coil

Industrial grade hot-rolled wire rod coil, 8 mm in diameter, of non-alloy steel, circular cross-section, in irregular coils, untreated. It is a generic product for various industrial applications, such as drawing or forging. Classified under tariff item 7213.91.00 as a hot-rolled bar or rod of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter.

JIS SWRH 982 Tire Cord Wire Rod

JIS SWRH 982 specification tire cord-quality steel wire rod, hot-rolled in irregular coils with a circular cross-section of less than 14 mm diameter, not treated. This high-carbon non-alloy steel rod is optimized for tire cord applications and meets the statistical note criteria for tire cord-quality wire rod.

Low Carbon Nonalloy Steel Wire Rod 9mm

Low carbon non-alloy steel wire rod, 9 mm in diameter, circular cross-section, hot-rolled in irregular coils, not treated or tempered. It is suitable for general manufacturing, including wire drawing and fasteners. Classified under tariff item 7213.91.00 as a hot-rolled bar or rod of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter.

Low Carbon Steel Rod 9.0mm Hot-Rolled Coil

Low carbon steel wire rod of 9.0 mm circular diameter, hot-rolled and supplied in irregular coils. It is untreated and not partly manufactured, and is intended for drawing into thinner wires for springs and cables. The product falls under tariff item 7213.91.00 because its diameter is less than 14 mm.

Low Carbon Welding Wire Rod 6.3mm

Low carbon (≤0.08%) non-alloy steel wire rod of 6.3 mm diameter, hot-rolled in coils for general welding wire per statistical note 4. This product features excellent drawability for thin diameter electrodes and is classified under tariff item 7213.91.00.

MIG Welding Wire Rod 6.0mm

MIG welding wire rod, 6.0 mm in diameter, of high-purity non-alloy steel, supplied in coiled form for the manufacture of MIG welding wire. Its controlled carbon content and clean surface ensure consistent feed and weld quality. It is classified under tariff item 7213.91.00 as a hot-rolled bar or rod of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter, in irregularly wound coils.

Mild Steel Wire Rod 6mm for Nail Making

Mild steel wire rod of 6 mm diameter, hot-rolled in irregularly wound coils, made of non-alloy steel. It is not treated or partly manufactured and is specifically produced for high-speed nail production lines. This product is classified under tariff item 7213.91.00 as its diameter is less than 14 mm.

Nonalloy Steel Billet Rod Coil 5.5mm

Non-alloy steel billet rod coil, 5.5 mm in diameter, hot-rolled from billet, circular section, in irregular coils, untreated. It is a semi-finished product for further processing into wire or small components. Classified under tariff item 7213.91.00 as a hot-rolled bar or rod of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter.

NTW-1085 Tire Cord-Quality Wire Rod

NTW-1085 grade steel wire rod designed specifically for tire cord production, hot-rolled in irregularly wound coils with a circular cross-section of less than 14 mm, not partly manufactured. This high-strength, high-ductility non-alloy steel rod meets the statistical note criteria for tire cord-quality wire rod.

S10C Japanese Standard Steel Rod Coil

S10C Japanese standard steel rod coil, 12.7 mm in diameter, of non-alloy steel, circular section, hot-rolled in irregularly wound coils. It meets the S10C specification for general engineering use. Classified under tariff item 7213.91.00 as a hot-rolled bar or rod of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter.

SAE 1005 Hot-Rolled Wire Rod 10mm

SAE 1005 steel wire rod of 10 mm circular cross-section, hot-rolled in irregular coils, made of non-alloy steel. It is free of tempering or manufacturing steps and is used as feedstock for chain and hardware cloth. The product falls under tariff item 7213.91.00 because its diameter is less than 14 mm.

SAE 1006 Hot-Rolled Wire Rod 6.5mm

SAE 1006 low carbon steel wire rod of 6.5 mm circular cross-section, hot-rolled in irregularly wound coils. It is untreated and not partly manufactured, and is commonly used for cold heading applications like screws and bolts. This product is classified under tariff item 7213.91.00 as its diameter is less than 14 mm.