Of circular cross-section measuring less than 14 mm in diameter
Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. > Other: > Of circular cross-section measuring less than 14 mm in diameter
Duty Rate (from China)
Products classified under Tariff item 7213.91
0.96% Carbon HT Tire Cord Steel Rod
Ultra-high carbon (0.96%) tire cord-quality steel wire rod, hot-rolled in irregularly wound coils with a circular cross-section measuring less than 14 mm in diameter. This non-alloy steel product is engineered for high tensile strength cords used in tire reinforcement and is not further worked or treated.
7213.91.0012mm CHQ Wire Rod for Construction Screws
Maximum size CHQ rod of 12 mm diameter per statistical note 3 specifications for construction lag screws, hot-rolled in irregularly wound coils with a circular cross-section under 14 mm. This non-alloy steel product has high manganese content for strength after cold heading.
7213.91.00AISI 1008 Low Carbon Steel Rod Coil
AISI 1008 low carbon steel rod of 12 mm circular diameter, hot-rolled in irregularly wound coils, made of non-alloy steel. It is not partly manufactured and is used for various wire drawing applications. This product is classified under tariff item 7213.91.00 as its diameter is less than 14 mm.
7213.91.00AWS ER70S-6 Wire Rod 5.5mm
AWS ER70S-6 specification non-alloy steel wire rod of 5.5 mm diameter in hot-rolled coils, welding quality per statistical note 4 for solid MIG wire. This product features enhanced deoxidizers for welding dirty mill scale and is classified under tariff item 7213.91.00.
7213.91.00Carbon Steel Rod 11.5mm Irregular Coil
Carbon steel rod of 11.5 mm diameter, hot-rolled in irregularly wound coils, made of low carbon non-alloy steel. It is not treated or tempered and is intended for drawing into agricultural fencing wire. This product meets the definition of bars and rods hot-rolled in irregularly wound coils under heading 72.13, with a circular cross-section measuring less than 14 mm.
7213.91.00CHQ Statistical Note 6 Wire Rod 10mm Automotive Fasteners
10mm CHQ wire rod certified to statistical note 3 for automotive fastener cold heading, hot-rolled in coils with a circular cross-section under 14 mm, not partly manufactured. This non-alloy steel product features tight chemistry control for OEM suspension and steering bolts.
7213.91.00CHQ Steel Wire Rod 6.0mm for Machine Screws
CHQ steel wire rod of 6.0 mm diameter for cold heading machine screws, hot-rolled in coils with a circular cross-section under 14 mm, not further worked or treated. This non-alloy steel product features high ductility formulation to prevent cracking during cold forming.
7213.91.00Cold Heading Quality (CHQ) Wire Rod 5.5mm for Fasteners
Hot-rolled CHQ steel wire rod of 5.5 mm diameter in irregularly wound coils, with a circular cross-section under 14 mm, not tempered or treated. This non-alloy steel product meets statistical note 3 specifications for cold heading quality with specific chemistry for screw production.
7213.91.00Cold Heading Wire Rod 8.0mm for Self-Tapping Screws
CHQ grade steel wire rod of 8.0 mm diameter for self-tapping screw production, hot-rolled in irregularly wound coils, not tempered or treated, under 14 mm limit. This non-alloy steel product features controlled phosphorus and sulfur for superior cold heading performance.
7213.91.00Drawing Quality Hot-Rolled Steel Rod 11mm
Drawing quality (DQ) non-alloy steel rod of 11 mm circular cross-section, hot-rolled in irregular coils. It is not tempered and is used for wire drawing applications. The product falls under tariff item 7213.91.00 because its diameter is less than 14 mm.
7213.91.00ER70KS Welding Rod Coil 5.5mm
ER70KS grade non-alloy steel wire rod of 5.5 mm diameter, hot-rolled in irregular coils for production of GMAW welding electrodes as per statistical note 4. This product features low sulfur and phosphorus content to ensure smooth wire drawing and welding performance.
7213.91.00Grade 1008 Steel Wire Rod 7mm Diameter Coil
Grade 1008 steel wire rod of 7 mm diameter, hot-rolled in irregularly wound coils, made of non-alloy steel. It is not tempered or treated and is used primarily for manufacturing fencing wire and staples. The product falls under tariff item 7213.91.00 as it has a circular cross-section measuring less than 14 mm.
7213.91.00Grade 1012 Steel Hot-Rolled Rod 8mm Coil
Grade 1012 steel rod of 8 mm circular cross-section, hot-rolled in irregularly wound coils, made of non-alloy steel. It is untreated and not tempered, and is used in welding wire and electrode manufacturing. This product is classified under tariff item 7213.91.00 because its diameter is less than 14 mm.
7213.91.00Grade 1015 Wire Rod 12mm Hot-Rolled
Grade 1015 wire rod of 12 mm diameter, hot-rolled in irregular coils, made of non-alloy steel. It is untreated and untempered, and is used for drawing mechanical spring wire. The product fits tariff item 7213.91.00 due to its circular cross-section measuring less than 14 mm.
7213.91.00Grade 1018 CHQ Wire Rod 9.5mm for Nuts and Bolts
SAE 1018 equivalent CHQ steel rod of 9.5 mm diameter for nut and bolt cold heading, hot-rolled in irregular coils with a circular cross-section under 14 mm, untreated. This non-alloy steel product features balanced chemistry for multi-stage cold forming.
7213.91.00High Carbon 0.82% C Tire Cord Steel Wire Rod
Tire cord-quality wire rod with 0.82% carbon content, hot-rolled in coils with a diameter of less than 14 mm, untempered and untreated. This non-alloy steel product is designed for direct drawing into tire reinforcement filaments and meets the statistical note criteria for tire cord-quality wire rod.
7213.91.00Hot-Rolled 1020 Steel Rod Coil 13mm
1020 non-alloy steel rod of 13 mm circular cross-section, hot-rolled in irregularly wound coils. It is not partly manufactured and is used for general wire drawing and manufacturing. This product is classified under tariff item 7213.91.00 as its diameter is less than 14 mm.
7213.91.00Hot-Rolled Mild Steel Wire Rod 10mm Coil
Mild steel (non-alloy) wire rod of 10 mm circular cross-section, hot-rolled in irregularly wound coils. It is not tempered and is used for various wire drawing applications. The product falls under tariff item 7213.91.00 because its diameter is less than 14 mm.
7213.91.00Hot-Rolled Mild Steel Wire Rod 5.5mm Diameter
Hot-rolled wire rod of non-alloy steel in irregularly wound coils, with a circular cross-section of 5.5 mm diameter. It is not tempered, treated, or partly manufactured, and is the basic form used for drawing into wire. This product is classified under tariff item 7213.91.00 as its diameter is less than 14 mm.
7213.91.00Hot-Rolled SAE 1018 Steel Wire Rod Coil
Hot-rolled wire rod of non-alloy steel with a circular cross-section under 14 mm diameter, supplied in irregularly wound coils. It is not tempered or treated and is used for general wire drawing applications. This product is classified under tariff item 7213.91.00.
7213.91.00Industrial Grade Hot-Rolled Wire Rod Coil
Industrial grade hot-rolled wire rod coil, 8 mm in diameter, of non-alloy steel, circular cross-section, in irregular coils, untreated. It is a generic product for various industrial applications, such as drawing or forging. Classified under tariff item 7213.91.00 as a hot-rolled bar or rod of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter.
7213.91.00JIS SWRH 982 Tire Cord Wire Rod
JIS SWRH 982 specification tire cord-quality steel wire rod, hot-rolled in irregular coils with a circular cross-section of less than 14 mm diameter, not treated. This high-carbon non-alloy steel rod is optimized for tire cord applications and meets the statistical note criteria for tire cord-quality wire rod.
7213.91.00Low Carbon Nonalloy Steel Wire Rod 9mm
Low carbon non-alloy steel wire rod, 9 mm in diameter, circular cross-section, hot-rolled in irregular coils, not treated or tempered. It is suitable for general manufacturing, including wire drawing and fasteners. Classified under tariff item 7213.91.00 as a hot-rolled bar or rod of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter.
7213.91.00Low Carbon Steel Rod 9.0mm Hot-Rolled Coil
Low carbon steel wire rod of 9.0 mm circular diameter, hot-rolled and supplied in irregular coils. It is untreated and not partly manufactured, and is intended for drawing into thinner wires for springs and cables. The product falls under tariff item 7213.91.00 because its diameter is less than 14 mm.
7213.91.00Low Carbon Welding Wire Rod 6.3mm
Low carbon (≤0.08%) non-alloy steel wire rod of 6.3 mm diameter, hot-rolled in coils for general welding wire per statistical note 4. This product features excellent drawability for thin diameter electrodes and is classified under tariff item 7213.91.00.
7213.91.00MIG Welding Wire Rod 6.0mm
MIG welding wire rod, 6.0 mm in diameter, of high-purity non-alloy steel, supplied in coiled form for the manufacture of MIG welding wire. Its controlled carbon content and clean surface ensure consistent feed and weld quality. It is classified under tariff item 7213.91.00 as a hot-rolled bar or rod of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter, in irregularly wound coils.
7213.91.00Mild Steel Wire Rod 6mm for Nail Making
Mild steel wire rod of 6 mm diameter, hot-rolled in irregularly wound coils, made of non-alloy steel. It is not treated or partly manufactured and is specifically produced for high-speed nail production lines. This product is classified under tariff item 7213.91.00 as its diameter is less than 14 mm.
7213.91.00Nonalloy Steel Billet Rod Coil 5.5mm
Non-alloy steel billet rod coil, 5.5 mm in diameter, hot-rolled from billet, circular section, in irregular coils, untreated. It is a semi-finished product for further processing into wire or small components. Classified under tariff item 7213.91.00 as a hot-rolled bar or rod of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter.
7213.91.00NTW-1085 Tire Cord-Quality Wire Rod
NTW-1085 grade steel wire rod designed specifically for tire cord production, hot-rolled in irregularly wound coils with a circular cross-section of less than 14 mm, not partly manufactured. This high-strength, high-ductility non-alloy steel rod meets the statistical note criteria for tire cord-quality wire rod.
7213.91.00S10C Japanese Standard Steel Rod Coil
S10C Japanese standard steel rod coil, 12.7 mm in diameter, of non-alloy steel, circular section, hot-rolled in irregularly wound coils. It meets the S10C specification for general engineering use. Classified under tariff item 7213.91.00 as a hot-rolled bar or rod of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter.
7213.91.00SAE 1005 Hot-Rolled Wire Rod 10mm
SAE 1005 steel wire rod of 10 mm circular cross-section, hot-rolled in irregular coils, made of non-alloy steel. It is free of tempering or manufacturing steps and is used as feedstock for chain and hardware cloth. The product falls under tariff item 7213.91.00 because its diameter is less than 14 mm.
7213.91.00SAE 1006 Hot-Rolled Wire Rod 6.5mm
SAE 1006 low carbon steel wire rod of 6.5 mm circular cross-section, hot-rolled in irregularly wound coils. It is untreated and not partly manufactured, and is commonly used for cold heading applications like screws and bolts. This product is classified under tariff item 7213.91.00 as its diameter is less than 14 mm.
7213.91.00SAE 1010 Steel Rod Hot-Rolled Coil
SAE 1010 steel rod, hot-rolled coil, 11.5 mm in diameter, of non-alloy steel, circular section, in irregularly wound coils, untreated. It is a standard low-carbon steel for general manufacturing, including wire drawing and forming. Classified under tariff item 7213.91.00 as a hot-rolled bar or rod of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter.
7213.91.00SAE 1010 Wire Rod 5.5mm Irregular Coil
SAE 1010 non-alloy steel rod of 5.5 mm diameter, hot-rolled and wound irregularly in coils. It is not tempered or partly manufactured and is standard feedstock for mesh and chain link fencing wire production. The product falls under tariff item 7213.91.00 because its diameter is less than 14 mm.
7213.91.00SAE 1080 Tire Cord-Quality Steel Wire Rod
SAE 1080 tire cord-quality steel wire rod, hot-rolled in irregularly wound coils with a circular cross-section of less than 14 mm diameter, manufactured to high tensile strength standards for tire cord production. This non-alloy steel product meets the statistical note criteria for tire cord-quality wire rod.
7213.91.00SAW Welding Wire Rod 5.5mm
SAW welding wire rod, 5.5 mm in diameter, of non-alloy steel, hot-rolled and supplied in irregularly wound coils, specifically produced for submerged arc welding applications. It meets strict chemical composition and cleanliness standards for high-duty-cycle welding. Classified under tariff item 7213.91.00 as a hot-rolled bar or rod of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter.
7213.91.00Shipbuilding Welding Rod 8.0mm
Shipbuilding welding rod, 8.0 mm in diameter, of non-alloy steel, hot-rolled into irregularly wound coils, with welding quality per statistical note for use in ship hull fabrication. Its high-toughness chemistry is designed for thick-section welds. Classified under tariff item 7213.91.00 as a hot-rolled bar or rod of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter.
7213.91.00Statistical Note 6 CHQ Wire Rod 7mm Diameter
Precisely formulated CHQ steel wire rod of 7 mm diameter meeting statistical note 3 carbon, manganese, and sulfur limits, hot-rolled in irregular coils for cold heading bolts and nuts. This non-alloy steel product is optimal for high-volume fastener production.
7213.91.00Submerged Arc Wire Rod 7.0mm
Submerged arc wire rod, 7.0 mm in diameter, of hot-rolled non-alloy steel in coils, certified welding quality for submerged arc welding wire production. It features controlled cleanliness and uniform diameter for high-duty-cycle welding. Classified under tariff item 7213.91.00 as a hot-rolled bar or rod of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter.
7213.91.00TIG Welding Filler Rod Stock 6.5mm
TIG welding filler rod stock, 6.5 mm in diameter, of hot-rolled non-alloy steel wire rod in coils, welding quality for TIG/GTAW filler wire. Its precise chemistry ensures corrosion-resistant welds in structural steel. Classified under tariff item 7213.91.00 as a hot-rolled bar or rod of iron or non-alloy steel, of circular cross-section measuring less than 14 mm in diameter.