Other
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. > Not further worked than hot-rolled: > Other > Other
Duty Rate (from China)
Products classified under Tariff item 7211.19.00.90
Fabrication Hot-Rolled Steel Panel Strip 195mm Wide
Hot-rolled steel strip, 195 mm wide, for metal panel fabrication, made of non-alloy steel and not clad. It is a flat-rolled product of iron or non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.
7211.19.00High-Strength Hot-Rolled Steel for Agricultural Equipment Frames
High-strength hot-rolled steel sheets, less than 300 mm wide and 2.5 mm thick, with a minimum yield strength of 275 MPa, used for structural frames in agricultural equipment. These are flat-rolled products of non-alloy steel, not further worked than hot-rolling, and not clad, plated or coated, falling under tariff item 7211.19.00 as 'Other'.
7211.19.00High-Strength Hot-Rolled Steel for Heavy Duty Shelving Posts
High-strength hot-rolled steel, under 300 mm wide and 2.8 mm thick, with a yield strength of 280 MPa, used for industrial shelving uprights. This is a flat-rolled non-alloy steel product, not further worked than hot-rolling, and not clad, plated or coated, classified under tariff item 7211.19.00 as 'Other'.
7211.19.00High-Strength Hot-Rolled Steel Shim Stock
Precision narrow high-strength steel, less than 300 mm wide and 1.8 mm thick, with a yield strength of 290 MPa, hot-rolled for machinery shimming and alignment. This is a flat-rolled non-alloy steel product, not further worked than hot-rolling, and not clad, plated or coated, falling under tariff item 7211.19.00 as 'Other'.
7211.19.00High-Strength Hot-Rolled Steel Strip for Automotive Suspension
High-strength hot-rolled steel strip, less than 300 mm wide and under 3 mm thick, with a minimum yield point of 275 MPa, used for automotive suspension components. This is a flat-rolled non-alloy steel product, not further worked than hot-rolling, and not clad, plated or coated, classified under tariff item 7211.19.00 as 'Other'.
7211.19.00High-Strength Steel Band 2.2mm x 300mm
Narrow hot-rolled band of high-strength steel (<3mm thick, ≥275 MPa yield), 300mm wide, not further worked, used for strapping in industrial packaging. It is a flat-rolled product of non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.
7211.19.00High-Strength Steel Banding for Heavy Cargo Securing
High-strength hot-rolled steel flat products, under 300 mm wide and less than 3 mm thick, with a yield strength of at least 275 MPa, used for industrial strapping. This is a flat-rolled non-alloy steel product, not further worked than hot-rolling, and not clad, plated or coated, falling under tariff item 7211.19.00 as 'Other'.
7211.19.00High-Strength Steel Flat 1.8mm x 500mm
Hot-rolled flat product of high-strength non-alloy steel, 1.8mm thickness with 275 MPa minimum yield, 500mm width under 600mm, no cladding or plating. It is a flat-rolled product of iron or non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.
7211.19.00High-Strength Steel Flat for Mining Equipment Reinforcement
Narrow hot-rolled high-strength steel flats, less than 300 mm wide and 2.2 mm thick, with a minimum yield of 275 MPa, used for reinforcing mining drill rig components. This is a flat-rolled non-alloy steel product, not further worked than hot-rolling, and not clad, plated or coated, classified under tariff item 7211.19.00 as 'Other'.
7211.19.00High-Strength Steel for Wind Turbine Tower Bracing
Hot-rolled high-strength steel flats, under 300 mm wide and 2.9 mm thick, with a yield strength of 355 MPa, used in wind turbine structural bracing. This is a flat-rolled non-alloy steel product, not further worked than hot-rolling, and not clad, plated or coated, classified under tariff item 7211.19.00 as 'Other'.
7211.19.00High-Strength Steel Hot-Rolled Blank 2.9mm x 580mm
High-strength steel hot-rolled blank, 2.9mm thick and 580mm wide, cut from strip and supplied flat without further processing. Its yield strength of at least 275 MPa qualifies it as high-strength non-alloy steel under Chapter 72.
7211.19.00High-Strength Steel Hot-Rolled Sheet 2.8mm x 550mm
Hot-rolled sheet of high-strength non-alloy steel, 2.8mm thick and 550mm wide, supplied flat without coils or further working. The yield strength of at least 275 MPa and width under 600mm place it in this tariff item.
7211.19.00High-Strength Steel Hot-Rolled Slit Coil Cut Flat 2.5mm x 450mm
Slit and cut-to-length from hot-rolled coil, this high-strength steel strip is 2.5mm thick and 450mm wide, presented flat rather than in coils. With a yield strength of at least 275 MPa and no further working, it fits this tariff item.
7211.19.00High-Strength Steel Hot-Rolled Strip 1.5mm x 400mm
Flat-rolled hot-rolled strip of non-alloy high-strength steel, 1.5mm thick and 400mm wide, with a minimum yield point of 275 MPa. It is not further worked beyond hot-rolling and is not clad or coated.
7211.19.00High-Strength Steel Narrow Hot-Rolled Strip 1.2mm x 200mm
Narrow high-strength steel hot-rolled strip, 1.2mm thick and 200mm wide, with a minimum yield point of 275 MPa. It is not clad or coated and has not been further worked beyond hot-rolling.
7211.19.00High-Strength Steel Slit Strip for Construction Scaffolding
Hot-rolled high-strength steel slit into widths under 300 mm, less than 3 mm thick, with a yield point of 275 MPa minimum, used for scaffolding braces. This is a flat-rolled non-alloy steel product, not further worked than hot-rolling, and not clad, plated or coated, falling under tariff item 7211.19.00 as 'Other'.
7211.19.00Hot-Rolled Black Steel Strip 200mm Wide
Black hot-rolled non-alloy steel strip, 200 mm wide, retaining mill scale and not further processed. It is a flat-rolled product of iron or non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.
7211.19.00Hot-Rolled Carbon Steel Banding Strap
Heavy-duty hot-rolled non-alloy steel strip, 25-50 mm wide and 2-4 mm thick, used for securing cargo pallets and heavy machinery. This is a flat-rolled product of iron or non-alloy steel, not further worked than hot-rolling, and not clad, plated or coated, falling under tariff item 7211.19.00 as 'Other'.
7211.19.00Hot-Rolled Low Carbon Steel Ribbon 240mm Wide
Thin low-carbon non-alloy steel ribbon, hot-rolled to 240 mm width for binding applications. It is a flat-rolled product of iron or non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.
7211.19.00Hot-Rolled Mild Steel Flat Bar 150mm x 5mm
Flat bar of mild non-alloy steel, hot-rolled to 150 mm width and 5 mm thickness, supplied not in coils and without patterns. It is a flat-rolled product of iron or non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.
7211.19.00Hot-Rolled Mild Steel Strip for Automotive Trim
Narrow hot-rolled flat strip of non-alloy steel, less than 300 mm wide and over 1.25 mm thick, used for manufacturing decorative trim in vehicles. This is a flat-rolled product of iron or non-alloy steel, not further worked than hot-rolling, and not clad, plated or coated, classified under tariff item 7211.19.00 as 'Other'.
7211.19.00Hot-Rolled Mild Steel Weatherstripping Base
Hot-rolled low-carbon steel strip, 150 mm wide by 1.8 mm thick, serving as a carrier for rubber weatherstripping in doors and windows. This is a flat-rolled product of iron or non-alloy steel, not further worked than hot-rolling, and not clad, plated or coated, falling under tariff item 7211.19.00 as 'Other'.
7211.19.00Hot-Rolled Nonalloy Steel Blank 180mm Wide
Steel blank hot-rolled from slab to 180 mm width, rectangular, not further worked, for stamping. It is a flat-rolled product of non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.
7211.19.00Hot-Rolled Nonalloy Steel Edging Strip
Hot-rolled mild steel strip, 200 mm wide by 2.5 mm thick, for furniture and shelf edging applications. This is a flat-rolled product of iron or non-alloy steel, not further worked than hot-rolling, and not clad, plated or coated, classified under tariff item 7211.19.00 as 'Other'.
7211.19.00Hot-Rolled Nonalloy Steel Strip 250mm Wide
A flat-rolled product of non-alloy steel, hot-rolled without further working, measuring 250 mm in width and under 600 mm, not clad, plated, or coated. It is classified under this tariff item as 'other' hot-rolled steel of a width less than 600 mm.
7211.19.00Hot-Rolled Steel Flat Bar for Tool Handles
Rectangular hot-rolled mild steel flat bar, 50 mm wide by 3 mm thick, used as blanks for hammer and axe handles. This is a flat-rolled product of iron or non-alloy steel, not further worked than hot-rolling, and not clad, plated or coated, falling under tariff item 7211.19.00 as 'Other'.
7211.19.00Hot-Rolled Steel Track Base for Slides
Narrow hot-rolled mild steel strip, 40 mm wide by 2 mm thick, forming a base channel for drawer slides and rails. This is a flat-rolled product of iron or non-alloy steel, not further worked than hot-rolling, and not clad, plated or coated, classified under tariff item 7211.19.00 as 'Other'.
7211.19.00HRPO Edge-Trimmed Steel Banding 280mm Wide
Hot-rolled pickled and oiled (HRPO) non-alloy steel banding strip, edge-trimmed to 280 mm width, not further worked beyond hot-rolling process. It is a flat-rolled product of iron or non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.
7211.19.00Industrial Hot-Rolled Steel Mounting Plate Blanks
Hot-rolled carbon steel rectangular blanks, 250 mm wide by 6 mm thick, for machinery mounting bases. This is a flat-rolled product of iron or non-alloy steel, not further worked than hot-rolling, and not clad, plated or coated, falling under tariff item 7211.19.00 as 'Other'.
7211.19.00Industrial Hot-Rolled Steel Strapping 260mm Wide
Heavy-duty hot-rolled steel strapping coil stock, slit to 260 mm width for industrial packaging use. It is a flat-rolled product of non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.
7211.19.00Machinery Guard Hot-Rolled Steel Panel
A hot-rolled non-alloy steel sheet, 280 mm wide and 4 mm thick, used for safety guards on industrial machinery. It is a flat-rolled product of iron or non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.
7211.19.00Narrow Hot-Rolled Mild Steel Sheet 275mm x 2.5mm
Narrow mild steel sheet hot-rolled to 275 mm width and 2.5 mm thickness, not in coils, for fabrication. It is a flat-rolled product of non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.
7211.19.00Narrow Hot-Rolled Steel Reinforcement Strip
A plain surface hot-rolled steel strip, 75 mm wide and 3.2 mm thick, used for non-structural reinforcement in wooden structures. It is a flat-rolled product of non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.
7211.19.00Narrow Hot-Rolled Steel Shim Stock
Precision hot-rolled low-carbon steel strip, 100 mm wide and 1.5 mm thick, supplied in sheets for machinery shimming and leveling. It is a flat-rolled product of non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.
7211.19.00Narrow Pickled Steel Banding 0.8mm x 30mm
Hot-rolled non-alloy steel banding used for strapping, with a pickled surface, 30mm wide and 0.8mm thick. The pickling removes mill scale but does not constitute further working beyond hot-rolling.
7211.19.00Narrow Pickled Steel for Tool Blanks 2.5mm x 75mm
Hot-rolled non-alloy steel strip for cutting into tool blanks, with a pickled surface, 75mm wide and 2.5mm thick. The pickling removes scale but does not constitute further working beyond hot-rolling.
7211.19.00Nonalloy Steel Hot Band 290mm Wide 3mm Thick
Hot-rolled non-alloy steel band ('hot band') at 290 mm width and 3 mm thickness, not clad or coated, for further processing. It is a flat-rolled product of iron or non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.
7211.19.00Pickled Hot-Rolled Spring Steel Strip 1.5mm x 150mm
Non-alloy steel strip for springs, hot-rolled and pickled, 150mm wide and 1.5mm thick. The pickling removes mill scale but does not constitute further working beyond hot-rolling, and the steel is not alloyed.
7211.19.00Pickled Hot-Rolled Steel for Automotive Stampings 1.8mm x 400mm
Non-alloy steel sheet, hot-rolled and pickled for automotive body panel stampings, 400mm wide and 1.8mm thick. The pickling removes scale but does not constitute further working beyond hot-rolling.
7211.19.00Pickled Hot-Rolled Steel Strip 0.5mm x 50mm
Narrow hot-rolled steel strip of non-alloy steel, pickled to remove mill scale, 50mm wide and 0.5mm thick. It is not further worked beyond hot-rolling and pickling, and is not clad or coated.