Zinc-Coated High-Strength Steel Railway Car Sides
Zinc-Coated High-Strength Steel Railway Car Sides are 1.8 mm thick, 1,600 mm wide electrolytic zinc-coated sheets with a 355 MPa minimum yield, used for freight car side panels. They are high-strength steel with corrosion protection, meeting the criteria for tariff item 7210.30.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the zinc coating is applied by hot-dip galvanizing
Hot-dip galvanized steel is classified under a different tariff item.
If the steel is uncoated and cold-rolled
Uncoated cold-rolled steel falls under heading 7209.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the steel is non-alloy and flat-rolled with a width exceeding 600 mm
• Provide a mill test certificate to verify the yield strength and electrolytic zinc coating
• Be aware that railway car sides may be subject to specific CBSA documentation requirements
Related Products under Tariff item 7210.30.00
Advanced High-Strength Steel for EV Battery Trays
Advanced High-Strength Steel for EV Battery Trays is a 1.9 mm electrolytic zinc-coated AHSS sheet, 1,350 mm wide, with a 780 MPa yield strength, for electric vehicle underbody battery enclosures. It is a flat-rolled non-alloy steel product with electrolytic zinc coating, qualifying for tariff item 7210.30.00.
Automotive Grade EG Steel for Door Skins
Automotive Grade EG Steel for Door Skins is a high-strength electrolytic galvanized steel sheet used for vehicle door outer panels. It is a flat-rolled non-alloy steel product, 1,500 mm wide, with a double-sided zinc coating applied electrolytically, meeting the criteria for tariff item 7210.30.00.
Automotive High-Strength Galvanized Door Impact Beams
Automotive High-Strength Galvanized Door Impact Beams are electro-zinc coated non-alloy steel sheets, 1.5 mm x 1,400 mm, with a minimum 355 MPa yield strength, specifically for side door intrusion beams in passenger vehicles. They are flat-rolled products with electrolytic zinc coating, falling under tariff item 7210.30.00.
Commercial Quality Electrolytic Galvanized Steel
Commercial Quality Electrolytic Galvanized Steel is a CS Type B electrolytic zinc-coated steel sheet, 600-2000 mm wide, used for general fabrication and ductwork. It is a non-alloy flat-rolled product with standard corrosion protection, fitting the scope of tariff item 7210.30.00 for electrolytically zinc-plated steel.
Double-Sided EG Steel for White Goods
Double-Sided EG Steel for White Goods is a double-sided electrolytic galvanized steel sheet with a 40/40 g/m² zinc coating, used for refrigerator doors and washer lids. It provides uniform corrosion protection and formability, and is a flat-rolled non-alloy steel product over 600 mm wide, qualifying for tariff item 7210.30.00.
EG Steel Coil for Automotive Body Panels
EG Steel Coil for Automotive Body Panels consists of electrogalvanized steel coils, 1,200-1,800 mm wide, for car door and hood panels. The non-alloy steel base has an 80-120 g/m² zinc coating applied electrolytically, matching the criteria for tariff item 7210.30.00 for flat-rolled products over 600 mm wide.