Of a thickness exceeding 10 mm
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. > Other, in coils, not further worked than hot-rolled: > Of a thickness exceeding 10 mm > Of a thickness exceeding 10 mm
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7208.36
ASTM A1011 HR Coil 13mm Thick Nonalloy
ASTM A1011 hot-rolled non-alloy steel coil, 13 mm thick and over 600 mm wide, for exposed structural use. It is not coated and not further worked, fitting the tariff item's 'other' category for thick hot-rolled coils.
7208.36.00Heavy Gauge Hot-Rolled Carbon Steel Coil 25mm
Heavy 25 mm thick carbon steel hot-rolled coil, non-alloy, width 2000 mm, for forging blanks. It is not clad or coated and not further worked, matching the tariff item's 'other' category.
7208.36.00Heavy Gauge Hot-Rolled Steel Coil 20mm Thick for Pressure Vessels
Heavy gauge hot-rolled non-alloy steel coil, 20 mm thick and 1800 mm wide, uncoated and not further worked beyond hot-rolling. Designed for fabricating pressure vessel shells, it meets the tariff item's requirement of thickness exceeding 10 mm and coil form.
7208.36.00Heavy Hot-Rolled Nonalloy Coil 14mm for Wind Tower Bases
Hot-rolled non-alloy steel coil, 14 mm thick and 1700 mm wide, for wind turbine tower bases. It is uncoated and not further worked, fitting the tariff item's scope for thick hot-rolled coils.
7208.36.00High-Strength Hot-Rolled Steel Coil for Heavy Machinery Frames
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for heavy machinery frames. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00High-Strength Hot-Rolled Steel for Mining Conveyor Frames
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for heavy-duty mining conveyor frames. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00High-Strength Hot-Rolled Steel for Offshore Platform Fabrication
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for offshore platform fabrication. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00High-Strength Hot-Rolled Steel for Wind Turbine Towers
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for wind turbine towers. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00High-Strength Steel Coil for Bridge Girder Construction
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for bridge girder construction. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00High-Strength Steel Coil for Crane Boom Manufacturing
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for crane boom manufacturing. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00High-Strength Steel Coil for Heavy Dump Truck Chassis
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for heavy dump truck chassis. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00High-Strength Steel Coil for Heavy Excavator Base Frames
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for heavy excavator base frames. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00High-Strength Steel for Shipbuilding Hull Plates
High-strength hot-rolled steel coil, exceeding 10 mm in thickness and 600 mm in width, with a minimum yield point of 355 MPa. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for shipbuilding hull plates. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00Hot-Rolled A283 Grade C Steel Coil 11mm Thick
ASTM A283 Grade C low-carbon non-alloy steel coil, hot-rolled to 11 mm thickness and width exceeding 600 mm, not clad or coated. It meets the tariff item's criteria for 'other' thick hot-rolled coils.
7208.36.00Hot-Rolled A572 Grade 42 Steel Coil 10.5mm
Hot-rolled steel coil, 10.5 mm thick and over 600 mm wide, made of ASTM A572 Grade 42 high-strength low-alloy but non-alloy equivalent steel. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for crane manufacturing. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00Hot-Rolled ASTM A36 Steel Coil 12mm Thick
Flat-rolled coil of non-alloy steel meeting ASTM A36 specifications, 12 mm thick and over 600 mm wide, produced via hot-rolling without cladding, plating, or coating. It falls under the tariff item's 'other' category.
7208.36.00Hot-Rolled Coil 12.5mm for Heavy Equipment Manufacturing
Hot-rolled non-alloy steel coil, 12.5 mm thick and 1200 mm wide, for heavy equipment chassis. It is uncoated and not further worked, matching the tariff item's criteria for thickness over 10 mm and coil form.
7208.36.00Hot-Rolled Mild Steel Coil 12.7mm for Ship Plate
Mild steel hot-rolled coil normalized for shipbuilding, 12.7 mm thick and 1800 mm wide, non-alloy and not further worked than hot-rolled. It is covered by the tariff item's 'other' category for thick coils.
7208.36.00Hot-Rolled Nonalloy Steel Coil 12mm Thick for Shipbuilding
Flat-rolled non-alloy steel, hot-rolled in coils, 12 mm thick and over 600 mm wide, not clad, plated, or coated, and not further worked beyond hot-rolling. Suitable for shipbuilding applications.
7208.36.00Hot-Rolled Q235B Steel Coil 16mm for Construction
Hot-rolled steel coil, 16 mm thick and 1600 mm wide, made of GB/T 700 Q235B mild steel. It is non-alloy steel, not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for building frameworks. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00Hot-Rolled S275JR Carbon Steel Coil 15mm
Hot-rolled steel coil, 15 mm thick and over 600 mm wide, made of EN 10025 S275JR carbon steel. It is non-alloy steel, not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for structural applications. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00Hot-Rolled SS400 Steel Coil 20mm Thick
Hot-rolled steel coil, 20 mm thick and 1500 mm wide, made of JIS G3101 SS400 non-alloy structural steel. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for bridges and heavy structures. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00Hot-Rolled St37-2 Steel Coil 14mm Thick
Hot-rolled steel coil, 14 mm thick and 1200 mm wide, made of DIN 17100 St37-2 structural non-alloy steel. It is not clad, plated, coated, or further worked beyond hot-rolling, making it suitable for boiler fabrication and general structural use. This product falls under tariff item 7208.36.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled.
7208.36.00Hot-Rolled Steel Coil 11mm Thick for Bridge Construction
Flat-rolled non-alloy steel coil, hot-rolled to 11 mm thickness and 1500 mm width, not further worked, for bridge girders. It meets the tariff item's requirements for thickness exceeding 10 mm and coil form.
7208.36.00HRPO Steel Coil 15mm Thick for Heavy Machinery Bases
Hot-rolled non-alloy steel coil, 15 mm thick and over 600 mm wide, pickled and oiled. Pickling and oiling are basic surface treatments that do not constitute further working, so it remains classified as not further worked than hot-rolled.
7208.36.00Industrial Hot-Rolled Steel Coil 18mm for Crane Manufacturing
Hot-rolled non-alloy steel coil, 18 mm thick and 2000 mm wide, for crane boom fabrication. It is free of cladding, coating, and further working, matching the tariff item's specifications.
7208.36.00Nonalloy Steel Coil 13mm Thick for Offshore Platform Structures
Hot-rolled coil of non-alloy steel, 13 mm thick and 1600 mm wide, for offshore platform structures. It meets all criteria: thickness over 10 mm, coil form, and no further working beyond hot-rolling.
7208.36.00Structural Hot-Rolled Steel Coil 16mm Thick for Building Frameworks
Hot-rolled non-alloy steel coil, 16 mm thick and 1400 mm wide, for structural I-beams in buildings. It is not further worked and has no surface treatments, fitting the tariff item's scope.
7208.36.00Thick Nonalloy HR Steel Coil 25mm for Mining Equipment
Heavy gauge hot-rolled non-alloy steel coil, 25 mm thick and 1900 mm wide, for mining equipment. It is not further worked and has no cladding or coating, matching the tariff item's requirements.