Advanced TWIP Steel Coil for Automotive
Advanced TWIP Steel Coil for Automotive is a pickled hot-rolled Twinning Induced Plasticity (TWIP) steel coil with thickness under 3 mm and width 600 mm or more, classified as advanced high-strength per note 4. It offers exceptional ductility for complex forming in cars. This product falls under tariff item 7208.27.00 as a flat-rolled product of iron or non-alloy steel, in coils, pickled but not further worked.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the TWIP steel contains alloying elements exceeding non-alloy limits
Alloy steel flat-rolled products are classified under heading 7225.
If the coil is not pickled
Hot-rolled coils without pickling fall under this alternative.
If cut to length and not in coils
Flat-rolled products in straight lengths are classified under this heading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify that the TWIP steel is non-alloy, as some TWIP grades contain alloying elements like manganese that could change classification
• Provide detailed technical data sheets to CBSA to support the 'advanced' high-strength designation
• Ensure the coil width exceeds 600 mm and thickness is below 3 mm
Related Products under Tariff item 7208.27.00
0.8mm Ultra-Thin Pickled Hot-Rolled Steel Coil
An ultra-thin hot-rolled non-alloy steel coil, pickled, 0.8 mm thick and 700 mm wide, for precision fabrication. It is hot-rolled, pickled, and in coils, with a thickness under 3 mm, meeting this tariff item.
1.0mm Hot Band Pickled Steel Coil
A hot band pickled non-alloy steel coil, 1.0 mm thick and 900 mm wide. It is hot-rolled, pickled, and in coils, with a thickness under 3 mm, fitting this tariff item.
1.2mm HRP Steel Coil for Construction Panels
A hot-rolled pickled non-alloy steel coil, 1.2 mm thick and 1400 mm wide, for construction siding. It is hot-rolled, pickled, and in coils, with a thickness under 3 mm, meeting this tariff item.
1.8mm Hot-Rolled Pickled Steel Coil for Appliances
A non-alloy steel hot-rolled coil, pickled, 1.8 mm thick and 1000 mm wide, suited for appliance panels. It is hot-rolled, pickled, and in coils, with a thickness under 3 mm, fitting this tariff item.
2.2mm Pickled Nonalloy Steel Coil Industrial Grade
An industrial-grade hot-rolled pickled steel coil of non-alloy steel, 2.2 mm thick and 1800 mm wide. It is hot-rolled, pickled, and in coils, with a thickness under 3 mm, meeting this tariff item.
2.5mm Pickled Steel Coil for Machinery Parts
A non-alloy hot-rolled pickled steel coil, 2.5 mm thick and 1,100 mm wide, intended for machinery housings. This product is classified under tariff item 7208.27.00 because it is a flat-rolled product of iron or non-alloy steel, of a width exceeding 600 mm, in coils, not further worked than hot-rolled and pickled, and of a thickness of less than 3 mm.