Milled E-Glass Fibers 1/4 Inch Chopped
Milled E-glass fibers chopped to 1/4 inch (6.35mm) but bundled into effective strands exceeding 50mm are used for injection molding compounds. These fibers fall under tariff item 7019.19.00 as other glass fibres, given the bundled strand form exceeds 50mm in length.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the fibers are not in strand form but as milled powder
Milled fibers not in strand form may be classified elsewhere.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Clarify the physical form of the product—whether it is truly chopped strands or milled fibers—to avoid misclassification
• Provide detailed specifications on strand length and bundling
• Ensure the product is not classified as a powder or granules under heading 3207
Related Products under Tariff item 7019.19.00
10.5-Micron Electrically Nonconductive RFL Cord
A specialty fiberglass reinforcing cord made from 10.5-micron continuous filaments, treated with resorcinol-formaldehyde-latex (RFL) to promote adhesion in rubber compounds. It is used in V-belts and transmission belts where low stretch and high modulus are required. This product falls under tariff item 7019.19.00 as a yarn or cord of glass fibres, not elsewhere specified.
10-Micron RFL Fiberglass Rubber Reinforcement Yarn
Continuous fiberglass yarn made from 10-micron nonconductive filaments, RFL-treated for bonding with rubber matrices. It is used in conveyor belts and automotive timing belts that require high tensile strength and dimensional stability. This yarn is classified under tariff item 7019.19.00 as other glass fibre yarn.
11-Micron RFL-Treated Fiberglass Tire Cord
High-performance fiberglass cord with 11-micron continuous filaments, impregnated with RFL for adhesion in rubber tire plies and sidewalls. It provides dimensional stability and fatigue resistance in radial tires. This cord is classified under tariff item 7019.19.00 as other glass fibre yarn or cord.
9.5-Micron RFL Fiberglass Hose Reinforcement Cord
Fiberglass cord made from 9.5-micron continuous nonconductive filaments, impregnated with resorcinol formaldehyde latex for use in high-pressure rubber hydraulic hoses. It enhances burst strength and flexibility in industrial applications. This product is classified under tariff item 7019.19.00 as other glass fibre cord.
Advantex Glass Chopped Strands 13mm
Advantex glass chopped strands, 13mm in length, are a boron-free E-glass alternative used in spray-up and hand lay-up composite applications. These strands are classified under tariff item 7019.19.00 as other glass fibres, specifically chopped strands not exceeding 50mm, and are valued for their recyclability and corrosion resistance.
AR-Glass Chopped Fibers for Concrete Reinforcement
AR-glass chopped fibers, longer than 50mm, are alkali-resistant and specifically engineered for concrete and cement reinforcement to enhance tensile strength. These loose chopped strands fall under tariff item 7019.19.00 as other glass fibres, given their length exceeds 50mm and they are not further processed into mats or fabrics.