Other
Textile products and articles, for technical uses, specified in Note 8 to this Chapter. > Other footwear: > Of a water absorption coefficient by weight exceeding 10% > Other > Other
Duty Rate (from China)
Products classified under Tariff item 7019.19.00.00
Advantex Glass Chopped Strands 13mm
>- Advantex chopped glass strands, 13mm in length, are a boron-free E-glass alternative used as reinforcement in spray-up and hand lay-up composite applications. These strands are not "worked" beyond chopping and are classified as glass fibers in the form of chopped strands under heading 70.19.
7019.19.00AR-Glass Chopped Fibers for Concrete Reinforcement
>- AR-glass chopped fibers longer than 50mm are specifically engineered for concrete and cement reinforcement to enhance tensile strength. These loose chopped strands are a form of glass fiber reinforcement and are classified under heading 70.19 as other glass fibers.
7019.19.00AR-Glass Roving for Concrete Reinforcement
>- AR-glass roving with zirconia content is used for spray-up GRC (glassfiber reinforced concrete) applications. This roving is a form of glass fiber, not further worked, and is classified under heading 70.19 as other glass fibers.
7019.19.00C-Glass Chopped Strands 1/4 Inch
>- C-glass chopped strands, 6mm in length, offer corrosion resistance for thermoplastics like polypropylene compounds. These chopped glass strands are a form of glass fiber reinforcement and are classified under heading 70.19 as other glass fibers.
7019.19.00C-Glass Chopped Strands for Chemical Resistance
>- C-glass chopped strands over 50mm long are corrosion-resistant and chemically treated for use in fiberglass reinforced plastics exposed to acids. They are glass fibers in chopped form, not further worked, and fall under heading 70.19 as other glass fibers.
7019.19.00Chopped Glass Fiber Tow
>- Chopped glass fiber tow consists of bundled chopped E-glass fibers used for textiles. This is a form of glass fiber in chopped form, not further worked, and is classified under heading 70.19 as other glass fibers.
7019.19.00E-Glass Assembled Roving for Pultrusion
>- E-glass assembled roving combines multiple strands for high-volume pultrusion processes in profiles like ladder rails. This roving is a form of glass fiber, not further worked, and is classified under heading 70.19 as other glass fibers.
7019.19.00E-Glass Chopped Strands 12mm x 3/16 Inch
>- E-glass chopped strands measuring 12mm in length are produced from molten glass drawn into filaments and cut to specification. These are glass fibers in chopped form, used as reinforcement in composites, and are classified under heading 70.19 as other glass fibers.
7019.19.00E-Glass Continuous Roving
>- E-glass continuous roving consists of bundles of parallel glass filaments drawn from molten glass, used primarily in filament winding for composites. This roving is a form of glass fiber, not further worked, and is classified under heading 70.19 as other glass fibers.
7019.19.00E-Glass Direct Roving 2400 Tex
>- E-glass direct roving 2400 tex is direct-drawn for wind blade production, with low fuzz for resin compatibility. This roving is a form of glass fiber, not further worked, and is classified under heading 70.19 as other glass fibers.
7019.19.00High-Performance ECR-Glass Chopped Fibers
>- High-performance ECR-glass chopped fibers over 50mm are designed for aggressive chemical environments in pipes and tanks. These chopped glass fibers are a form of glass fiber reinforcement, not further worked, and are classified under heading 70.19 as other glass fibers.
7019.19.00Milled E-Glass Fibers 1/4 Inch Chopped
>- Milled E-glass fibers chopped to 1/4 inch (6.35mm) are supplied in bundled form with effective strands exceeding 50mm. They are used for injection molding compounds and are classified as glass fibers in chopped form under heading 70.19.
7019.19.00S-Glass Chopped Fibers 6.4mm Diameter
>- S-glass chopped fibers with 6.4mm filament diameter and lengths over 50mm are high-strength reinforcements for aerospace and military composites. These chopped glass fibers are not further worked and are classified under heading 70.19 as other glass fibers.
7019.19.00Surface-Treated Chopped Glass Strands 75mm
>- Silane surface-treated chopped glass strands 75mm long are designed for superior resin wet-out in pultrusion processes. The surface treatment does not constitute "working" under chapter note 2, so they remain classified as glass fibers in chopped form under heading 70.19.
7019.19.00Wet Chopped E-Glass Strands 50.8mm
>- Wet-chopped E-glass strands precisely 50.8mm (2 inches) long are produced via a wet-out process for optimal dispersion in resin matrices. These chopped glass strands are a form of glass fiber reinforcement and are classified under heading 70.19 as other glass fibers.