Hickory Engineered Plank Flooring
Multi-ply engineered planks with a hickory (non-coniferous) outer veneer over plies each not exceeding 6 mm. A UV-cured clear finish shows the natural texture, and the planks are designed for high-traffic areas. This product falls under 4412.34.00 as other plywood with a non-coniferous outer ply.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the planks have a locking system
Flooring planks with a locking mechanism may be classified as assembled flooring.
If the outer ply is of tropical wood
Tropical wood outer plies are classified under this subheading.
If the outer ply is of coniferous wood
Coniferous outer ply plywood falls under this subheading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the hickory outer ply is not covered with an opaque finish; only transparent coatings are allowed
• Verify that all plies are ≤6 mm and the product is not a finished flooring article
• Declare the UV-cured finish as a transparent coating to support classification
Related Products under Tariff item 4412.34.00
Aircraft Grade Mahogany Plywood
Lightweight plywood for aircraft interior panels with a Swietenia mahogany face ply over an okoume core, all plies not exceeding 6 mm. The transparent epoxy finish preserves the wood markings, and it is classified under 4412.34.00 as non-coniferous outer ply plywood.
Ash Wood Laminated Flooring Panels
Laminated flooring panels with an ash (non-coniferous) face ply over inner hardwood or softwood sheets, each not exceeding 6 mm in thickness. A water-based clear coat preserves the natural markings, and micro-bevel edges facilitate installation. This product is classified under 4412.34.00 as other plywood with a non-coniferous outer ply.
Ash Wood Plywood Panel
Utility plywood with ash (non-coniferous) outer plies on a mixed core, with all sheets 6 mm or less in thickness. The surface has only a transparent coating, preserving the ash grain. Used for flooring underlayment where the ash texture remains visible.
Beech Face Utility Plywood
Industrial utility plywood with a beech (non-coniferous) face ply, with plies not exceeding 6 mm and no obscuring surface treatment. Used for shop fitting and display stands where the beech texture is preserved. The product consists solely of wood sheets.
Cedrela Face Fine Furniture Plywood
Premium grade plywood with a Spanish cedar (Cedrela spp.) face ply, designed for custom furniture tabletops and shelves. Each sheet ply does not exceed 6 mm in thickness, and the product consists solely of wood sheets. The straight grain and natural aroma of the Spanish cedar are highlighted, making it suitable for high-end interior applications.
Cedrela Odorata Plywood for Humidors
Specialty plywood featuring a Spanish cedar (Cedrela odorata) face ply, constructed for premium cigar humidors. The thin wood plies are each 6 mm or less, and the aromatic properties of the cedar help maintain cigar freshness. This product consists solely of wood sheets and is not surface-covered.