Other, with at least one outer ply of non-coniferous wood not specified under subheading 4412.33
Plywood, veneered panels and similar laminated wood. > Other plywood, consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness: > Other, with at least one outer ply of non-coniferous wood not specified under subheading 4412.33 > Other, with at least one outer ply of non-coniferous wood not specified under subheading 4412.33
Duty Rate (from China)
Products classified under Tariff item 4412.34
Aircraft Grade Mahogany Plywood
Lightweight plywood for aircraft interior panels with a Swietenia mahogany face ply over an okoume core, all plies not exceeding 6 mm. The transparent epoxy finish preserves the wood markings, and it is classified under 4412.34.00 as non-coniferous outer ply plywood.
4412.34.00Ash Wood Laminated Flooring Panels
Laminated flooring panels with an ash (non-coniferous) face ply over inner hardwood or softwood sheets, each not exceeding 6 mm in thickness. A water-based clear coat preserves the natural markings, and micro-bevel edges facilitate installation. This product is classified under 4412.34.00 as other plywood with a non-coniferous outer ply.
4412.34.00Ash Wood Plywood Panel
Utility plywood with ash (non-coniferous) outer plies on a mixed core, with all sheets 6 mm or less in thickness. The surface has only a transparent coating, preserving the ash grain. Used for flooring underlayment where the ash texture remains visible.
4412.34.00Beech Face Utility Plywood
Industrial utility plywood with a beech (non-coniferous) face ply, with plies not exceeding 6 mm and no obscuring surface treatment. Used for shop fitting and display stands where the beech texture is preserved. The product consists solely of wood sheets.
4412.34.00Cedrela Face Fine Furniture Plywood
Premium grade plywood with a Spanish cedar (Cedrela spp.) face ply, designed for custom furniture tabletops and shelves. Each sheet ply does not exceed 6 mm in thickness, and the product consists solely of wood sheets. The straight grain and natural aroma of the Spanish cedar are highlighted, making it suitable for high-end interior applications.
4412.34.00Cedrela Odorata Plywood for Humidors
Specialty plywood featuring a Spanish cedar (Cedrela odorata) face ply, constructed for premium cigar humidors. The thin wood plies are each 6 mm or less, and the aromatic properties of the cedar help maintain cigar freshness. This product consists solely of wood sheets and is not surface-covered.
4412.34.00Cedrela Plywood for Guitar Cases
High-quality plywood with a Spanish cedar face ply, designed for lightweight and resonant musical instrument cases such as guitar hard cases. It consists solely of thin wood sheets, each ply not exceeding 6 mm, and showcases the cedar's natural figuring. The product is not surface-covered with obscuring materials.
4412.34.00Cherry Veneer Plywood Flooring
High-end cherry wood plywood flooring with a cherry (non-coniferous) outer ply over a plywood core of wood sheets each not exceeding 6 mm. A transparent protective coating reveals the grain and markings, and the panels feature a click-lock design for commercial spaces. This product falls under 4412.34.00 as other plywood with a non-coniferous outer ply.
4412.34.00Cherry Wood Face Poplar Plywood
Decorative plywood with a cherry (non-coniferous) face ply on a poplar core, with all plies 6 mm or less. The surface is clear, showing the cherry grain pattern. Ideal for interior paneling where the cherry texture is desired.
4412.34.00European Beech Plywood Floorboards
Laminated floorboards with a European beech (non-coniferous) outer ply over plywood sheets each not exceeding 6 mm. An oil finish transparent to the grain is applied, and the boards have a tongue-and-groove profile for glue-down installation. This product is classified under 4412.34.00 as other plywood with a non-coniferous outer ply.
4412.34.00Furniture Grade Khaya Plywood
12 mm furniture plywood with a Khaya ivorensis mahogany face and back over a 5-layer hardwood core, all plies not exceeding 6 mm. The clear pre-catalyzed lacquer finish preserves the wood appearance, and it is classified under 4412.34.00.
4412.34.00Hickory Engineered Plank Flooring
Multi-ply engineered planks with a hickory (non-coniferous) outer veneer over plies each not exceeding 6 mm. A UV-cured clear finish shows the natural texture, and the planks are designed for high-traffic areas. This product falls under 4412.34.00 as other plywood with a non-coniferous outer ply.
4412.34.00Japanese Sen Plywood Instrument Back Panel
Plywood back panels for musical instruments with a traditional Japanese sen (Kalopanax) face ply, all plies being wood sheets not exceeding 6 mm. The surface is left uncovered or transparently coated. This product is classified under 4412.34.00 as other plywood with a non-coniferous outer ply.
4412.34.00Kalopanax Sen Plywood Furniture Grade Sheet
Furniture-grade plywood with a Kalopanax spp. (sen) face ply, layered from wood sheets each not exceeding 6 mm. The surface is transparently coated to show the grain. This product is classified under 4412.34.00 as other plywood with a non-coniferous outer ply.
4412.34.00Kalopanax Sen Plywood Model Making Sheets
Precision-cut plywood sheets for architectural models with a sen (Kalopanax) face ply, each wood layer not exceeding 6 mm. The surface is transparently coated, and the sheets have an ultra-fine grain for scale models. This product falls under 4412.34.00 as other plywood with a non-coniferous outer ply.
4412.34.00Khaya Mahogany Plywood Sheet
Standard 4x8 ft plywood sheet with Khaya spp. (African mahogany) as the exposed face ply, backed by poplar core plies all not exceeding 6 mm. The grain and texture are visible through a clear UV protective coating, and it is classified under 4412.34.00.
4412.34.00Mahogany Face Baltic Birch Plywood
Baltic birch core plywood (Betula spp.) topped with a Khaya mahogany face veneer ply, all plies not exceeding 6 mm, finished with clear conversion varnish. Used for fine furniture and millwork, and classified under 4412.34.00.
4412.34.00Mahogany Face Veneer Plywood Panel
Plywood panel consisting solely of wood sheets, each ply not exceeding 6 mm thick, featuring a face ply of genuine mahogany (Swietenia spp.) with inner plies of mixed tropical hardwoods. Not surface-covered or covered only with a transparent finish, and classified under 4412.34.00.
4412.34.00Mahogany Outer Ply Structural Plywood
Structural plywood panels with mahogany (non-coniferous) outer plies over a softwood core, each ply 6 mm or less, with an untreated surface. Used for formwork and framing applications where the natural wood texture is preserved. The product consists solely of wood sheets.
4412.34.00Maple Outer Ply Cabinet Grade Plywood
Cabinet-grade plywood featuring maple (non-coniferous) face and back plies over a hardwood core, with each ply 6 mm or less. The surface is unsurfaced, displaying clear maple grain texture. Used for kitchen cabinetry where the maple appearance is desired.
4412.34.00Maple Plywood Hardwood Flooring
Engineered flooring made from plywood with a maple (non-coniferous) top ply over multiple wood plies each not exceeding 6 mm. A clear sealant allows visibility of the wood grain and texture, and the edges are tongue-and-groove for installation. This product is classified under 4412.34.00 as other plywood with a non-coniferous outer ply.
4412.34.00Mixed Hardwood Engineered Flooring
Engineered plywood flooring with a blended mix of non-coniferous hardwoods (e.g., oak and walnut) as the outer ply, over wood plies each not exceeding 6 mm. A clear matte finish shows the markings, and the planks are wide-format. This product falls under 4412.34.00 as other plywood with a non-coniferous outer ply.
4412.34.00Oak Engineered Wood Flooring Panels
Plywood-based engineered wood flooring with an outer ply of oak (non-coniferous wood) over multiple inner plies each not exceeding 6 mm. Designed specifically for floor installation, the surface is left uncovered or transparently coated. This product is classified under 4412.34.00 as other plywood with a non-coniferous outer ply.
4412.34.00Oak Face Birch Core Plywood Sheet
Plywood panel with an outer ply of oak (non-coniferous wood) over a birch core, with each ply not exceeding 6 mm in thickness. It is not surface-covered or covered only with a transparent coating. This product qualifies as other plywood with a non-coniferous outer ply.
4412.34.00Poplar Outer Ply Marine Grade Plywood
Marine-grade plywood with poplar (non-coniferous) outer plies and waterproof glue, with each layer 6 mm or less. The surface is unsurfaced, showing the poplar grain. Suitable for boat building where the grain visibility is required.
4412.34.00Premium Sen Plywood Speaker Cabinet Board
High-fidelity speaker enclosure plywood with a sen (Kalopanax spp.) face ply for acoustic panels, using wood sheets not exceeding 6 mm throughout. The surface is clear-coated to preserve the grain. This product is classified under 4412.34.00 as other plywood with a non-coniferous outer ply.
4412.34.00Sen Face Architectural Plywood Bulkhead
Architectural plywood for marine bulkheads with a sen (Kalopanax spp.) face ply, all wood plies not exceeding 6 mm, and a transparent sealant. This product is classified under 4412.34.00 as other plywood with a non-coniferous outer ply.
4412.34.00Sen Face Ply Cabinet Plywood Panel
A plywood panel with a face ply of sen (Kalopanax spp.) wood, all plies not exceeding 6 mm in thickness, and no obscuring surface covering. It is classified under tariff item 4412.34.00 as 'other plywood' with a non-coniferous outer ply not specified elsewhere.
4412.34.00Sen Face Plywood Picture Frame Moulding Blank
Unmachined plywood blanks for picture frame mouldings, with a sen (Kalopanax spp.) face ply and all wood plies not exceeding 6 mm. The surface is clear, ready for profiling, and classified under 4412.34.00 as non-coniferous outer ply plywood.
4412.34.00Sen Kalopanax Plywood Display Case Back
Plywood backing panels for museum display cases, featuring a sen face ply (Kalopanax spp.) and thin wood sheet construction with each ply not exceeding 6 mm. The transparent finish preserves the wood grain, and the product is classified under 4412.34.00.
4412.34.00Sen Kalopanax Plywood Wall Paneling Sheet
Plywood wall paneling with a sen (Kalopanax spp.) face ply, constructed from sheets of wood each not exceeding 6 mm, and clear-coated to show the grain. It is classified under 4412.34.00 as other plywood with a non-coniferous outer ply.
4412.34.00Sen Veneer Plywood Kitchen Door Skin
Laminated plywood sheet with a sen (Kalopanax spp.) face veneer for kitchen cabinet doors, consisting solely of thin wood sheets with each ply not exceeding 6 mm. The transparent finish preserves the wood appearance, and it is classified under 4412.34.00.
4412.34.00Spanish Cedar Drawer Bottom Plywood
Thin plywood sheets with a Spanish cedar face ply, used for furniture drawer bottoms, providing natural scent and lightweight strength. All plies are 6 mm or less, and the product consists solely of wood sheets. It is commonly used in high-end bedroom furniture.
4412.34.00Spanish Cedar Face Ply Plywood Panel
Plywood panel with a face ply of Spanish cedar (Cedrela spp.) and inner plies of mixed hardwood, each not exceeding 6 mm in thickness. Used for fine cabinetry and furniture where the aromatic grain of Spanish cedar is desired. The product consists solely of wood sheets and is not surface-covered.
4412.34.00Spanish Cedar Laminated Cabinet Panels
Plywood panels with an outer ply of Spanish cedar, designed for premium kitchen and bathroom cabinet doors. Each ply is 6 mm or less, and the natural oil content repels insects, making it ideal for storage applications. The product consists solely of wood sheets and is not surface-covered.
4412.34.00Spanish Cedar Veneer Plywood for Drawers
Laminated plywood sheet with a Spanish cedar face ply, ideal for constructing aromatic dresser drawers and storage boxes. Each wood sheet ply is under 6 mm, preserving the natural cedar scent and appearance. The product consists solely of wood sheets and is not surface-covered.
4412.34.00Teak Alternative Plywood Flooring
Plywood flooring that mimics teak grain but uses other non-coniferous species as the outer ply, with all wood sheets not exceeding 6 mm. A transparent lacquer finish is applied, and the edges are bevelled for floating installation. This product falls under 4412.34.00 as other plywood with a non-coniferous outer ply.
4412.34.00Teak Face Plywood for Exterior Use
Plywood with a teak (non-coniferous) outer ply for weather-resistant applications, with plies 6 mm or less and no grain-obscuring cover. The natural teak markings are preserved for decking substrates. The product consists solely of wood sheets.
4412.34.00Walnut Face Lauan Core Plywood Panel
Premium plywood panel featuring a walnut (non-coniferous) face veneer over lauan core plies, with all sheets not exceeding 6 mm in thickness. The surface is left uncovered or only transparently coated, preserving the natural wood grain. This product is used in high-end furniture manufacturing and qualifies under tariff item 4412.34.00 as other plywood with a non-coniferous outer ply.
4412.34.00Walnut Multi-Ply Wood Flooring
Laminated plywood flooring panels with a walnut (non-coniferous) outer face ply over inner wood sheets each not exceeding 6 mm. A transparent oil finish preserves the natural grain, and the panels are designed for residential use. This product is classified under 4412.34.00 as other plywood with a non-coniferous outer ply.