Architectural Mockup Birch Panel 3.4mm
Birch outer ply plywood for building mockups and samples, with thin plies not exceeding 6 mm and a transparent finish. The panel dimensions are limited to 3.6 mm x 1.2 m x 2.2 m. This product falls under tariff item 4412.33.00 as it has a birch outer ply, a species explicitly listed.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the outer ply is tropical wood
Tropical wood outer plies are classified separately.
If the outer ply is coniferous
Coniferous outer plies fall under a different tariff item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify that the outer ply is birch and all plies are ≤6 mm to qualify for this tariff item
• Provide the exact dimensions and wood species to the CBSA in the import documentation
• Ensure the finish is transparent and does not obscure the grain
Related Products under Tariff item 4412.33.00
Birch Exterior Plywood for Wall Paneling
Plywood panels with a birch (Betula spp.) face ply, designed for interior wall paneling. All plies are non-coniferous and do not exceed 6 mm in thickness, with a transparent protective layer that preserves the natural birch grain. This product falls under tariff item 4412.33.00 as it has at least one outer ply of birch, a species explicitly listed in the item's description.
Birch Face Birch Plywood Panel 12mm
A plywood panel constructed solely from birch wood sheets, with each ply not exceeding 6 mm in thickness. The outer face ply is specifically from Betula spp. birch, and the surface is not covered or only covered with a transparent material that preserves the wood's appearance. This product qualifies under tariff item 4412.33.00 because the outer ply is birch, a listed non-coniferous species.
Birch Faced Aircraft Interior Plywood Panel 3.5mm
Lightweight plywood with a birch outer ply for aircraft cabin interiors, with all wood plies not exceeding 6 mm and dimensions limited to 3.6 mm thick x 1.2 m x 2.2 m. The panels are untreated or transparently coated. This product is classified under tariff item 4412.33.00 because the outer ply is birch, a listed non-coniferous species.
Birch Face Plywood Panel 3.6mm x 1.2m x 2.2m
A thin birch-faced plywood panel made from multiple plies of wood, each not exceeding 6 mm thick, with the outer ply being birch (Betula spp.). The dimensions are limited to 3.6 mm thickness, 1.2 m width, and 2.2 m length. This product falls under tariff item 4412.33.00 as it has a birch outer ply, a species explicitly listed.
Birch Plywood for Drawer Bottoms
Thin birch-faced plywood sheets designed for furniture drawer bottoms, with each ply not exceeding 6 mm in thickness. The outer ply is Betula spp. birch, and the surface is clear or uncovered to show the natural grain. This product falls under tariff item 4412.33.00 as it has a birch outer ply, a species specifically listed in the item.
Birch Top Poplar Core Plywood Sheet
Plywood with a birch (Betula spp.) face ply over poplar cores, with all non-coniferous plies not exceeding 6 mm in thickness. The surface has no grain-obscuring coating, making it suitable for furniture panels where the birch aesthetic is key. This product is classified under tariff item 4412.33.00 because the outer ply is birch, a listed species.