Other
Other articles of wood. > Coffins > Other, with at least one outer ply of non-coniferous wood of the species alder (Alnus spp.), ash (Fraxinus spp.), beech (Fagus spp.), birch (Betula spp.), cherry (Prunus spp.), chestnut (Castanea spp.), elm (Ulmus spp.), eucalyptus (Eucalyptus spp.), hickory (Carya spp.), horse chestnut (Aesculus spp.), lime (Tilia spp.), maple (Acer spp.), oak (Quercus spp.), plane tree (Platanus spp.), poplar and aspen (Populus spp.), robinia (Robinia spp.), tulipwood (Liriodendron spp.) or walnut (Juglans spp.) > Other
Duty Rate (from China)
Products classified under Tariff item 4412.33.00.90
Architectural Mockup Birch Panel 3.4mm
Birch outer ply plywood for building mockups and samples, with thin plies not exceeding 6 mm and a transparent finish. The panel dimensions are limited to 3.6 mm x 1.2 m x 2.2 m. This product falls under tariff item 4412.33.00 as it has a birch outer ply, a species explicitly listed.
4412.33.00Birch Exterior Plywood for Wall Paneling
Plywood panels with a birch (Betula spp.) face ply, designed for interior wall paneling. All plies are non-coniferous and do not exceed 6 mm in thickness, with a transparent protective layer that preserves the natural birch grain. This product falls under tariff item 4412.33.00 as it has at least one outer ply of birch, a species explicitly listed in the item's description.
4412.33.00Birch Face Birch Plywood Panel 12mm
A plywood panel constructed solely from birch wood sheets, with each ply not exceeding 6 mm in thickness. The outer face ply is specifically from Betula spp. birch, and the surface is not covered or only covered with a transparent material that preserves the wood's appearance. This product qualifies under tariff item 4412.33.00 because the outer ply is birch, a listed non-coniferous species.
4412.33.00Birch Faced Aircraft Interior Plywood Panel 3.5mm
Lightweight plywood with a birch outer ply for aircraft cabin interiors, with all wood plies not exceeding 6 mm and dimensions limited to 3.6 mm thick x 1.2 m x 2.2 m. The panels are untreated or transparently coated. This product is classified under tariff item 4412.33.00 because the outer ply is birch, a listed non-coniferous species.
4412.33.00Birch Face Plywood Panel 3.6mm x 1.2m x 2.2m
A thin birch-faced plywood panel made from multiple plies of wood, each not exceeding 6 mm thick, with the outer ply being birch (Betula spp.). The dimensions are limited to 3.6 mm thickness, 1.2 m width, and 2.2 m length. This product falls under tariff item 4412.33.00 as it has a birch outer ply, a species explicitly listed.
4412.33.00Birch Plywood for Drawer Bottoms
Thin birch-faced plywood sheets designed for furniture drawer bottoms, with each ply not exceeding 6 mm in thickness. The outer ply is Betula spp. birch, and the surface is clear or uncovered to show the natural grain. This product falls under tariff item 4412.33.00 as it has a birch outer ply, a species specifically listed in the item.
4412.33.00Birch Top Poplar Core Plywood Sheet
Plywood with a birch (Betula spp.) face ply over poplar cores, with all non-coniferous plies not exceeding 6 mm in thickness. The surface has no grain-obscuring coating, making it suitable for furniture panels where the birch aesthetic is key. This product is classified under tariff item 4412.33.00 because the outer ply is birch, a listed species.
4412.33.00Birch Veneer-Faced Cabinet Plywood
Laminated plywood sheets for cabinetry with birch (Betula spp.) as the exposed face ply, with all plies not exceeding 6 mm from non-coniferous woods. The panels are clear-coated to highlight natural birch markings without obscuring the grain. This product falls under tariff item 4412.33.00 as it has a birch outer ply, a species explicitly listed.
4412.33.00Birch Veneer Laminated Cabinet Plywood 3mm Thick
Laminated plywood sheet with a birch outer ply for kitchen cabinets, consisting solely of wood sheets each not exceeding 6 mm. The panel is sized at a maximum of 3.6 mm x 1.2 m x 2.2 m, and the natural birch grain is visible with no obscuring surface treatment. This product is classified under tariff item 4412.33.00 because the outer ply is birch, a listed species.
4412.33.00Clear Finish Birch Face Hardwood Plywood
Hardwood plywood with a birch (Betula spp.) face for premium furniture, with all plies non-coniferous and not exceeding 6 mm in thickness. The surface has a clear finish only, allowing the grain and texture to remain visible. This product is classified under tariff item 4412.33.00 because the outer ply is birch, a listed non-coniferous species.
4412.33.00Furniture Grade Birch Face Plywood 18mm
An 18 mm thick plywood panel with a birch face ply (Betula spp.) and inner plies from listed non-coniferous woods, each not exceeding 6 mm. A transparent UV coat preserves the birch texture. This product falls under tariff item 4412.33.00 as it has a birch outer ply, a species specifically listed in the item's description.
4412.33.00Furniture Grade Birch Plywood 3.6mm x 1220x2440mm
High-quality birch-faced plywood sheet for flat-pack furniture, composed of thin wood plies not exceeding 6 mm each and exactly fitting 3.6 mm x 1.2 m x 2.2 m limits. The natural grain is visible with no obscuring surface. This product falls under tariff item 4412.33.00 as it has a birch outer ply, a species explicitly listed.
4412.33.00Model Making Birch Plywood Sheet 2.5mm Thick
Ultra-thin birch-faced plywood for scale models and prototypes, with all plies not exceeding 6 mm and sized within 3.6 mm x 1.2 m x 2.2 m. The grain is exposed with no surface covering. This product is classified under tariff item 4412.33.00 because the outer ply is birch, a listed non-coniferous species.
4412.33.00Poplar Core Birch Face Underlayment Plywood 3.2mm
Plywood panel with a birch (Betula spp.) face ply over a poplar core, with each ply not exceeding 6 mm, for flooring underlayment or wall paneling. The panel is strictly sized at ≤3.6 mm x 1.2 m x 2.2 m with clear grain exposure. This product falls under tariff item 4412.33.00 as it has a birch outer ply, a species explicitly listed.
4412.33.00Premium Birch Face Maple Plywood
High-grade plywood with a birch (Betula spp.) face over maple inner plies, with all plies being non-coniferous wood sheets not exceeding 6 mm. The surface has no obscuring coating, and the grain is prominent. This product is classified under tariff item 4412.33.00 because the outer ply is birch, a listed species.