Douglas Fir Bookmatch Veneer for Flooring Underlay
Sliced and bookmatched Douglas fir veneer sheets, not exceeding 6 mm in thickness, used as a decorative underlay for engineered flooring. The planed surfaces enhance adhesion during lamination, and the coniferous origin places this product under tariff item 4408.10.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the veneer is already bonded into plywood panels
Plywood with at least one outer ply of coniferous wood falls under heading 44.12, not veneer sheets.
If the veneer is from a non-coniferous species
Non-coniferous veneer sheets are classified separately under the same heading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the veneer thickness does not exceed 6 mm and that it is classified as coniferous wood
• Keep records of the slicing or peeling process to support the classification
• Verify if any anti-dumping or countervailing duties apply to Douglas fir products from your country of origin
Related Products under Tariff item 4408.10.00
Douglas Fir Rotary Cut Veneer Sheets
Thin Douglas fir wood sheets obtained by rotary cutting logs, with thickness not exceeding 6 mm, used primarily for plywood production and furniture veneering. The sheets are typically planed or sanded for smooth surfaces, and their coniferous nature qualifies them under tariff item 4408.10.00.
End-Jointed Pine Veneer Sheets
End-jointed pine veneer sheets, sliced to a thickness not exceeding 6 mm, planed for plywood lamination. The end-jointing extends length without waste, a process explicitly allowed under this tariff item.
FSC Certified Spruce Veneer
FSC-certified spruce veneer sheets, sliced and sanded to under 6 mm for eco-friendly plywood facing. The certification supports traceability but does not affect tariff classification.
Hem-Fir Peeled Veneer
Hem-fir peeled veneer sheets, sanded to under 6 mm for structural panels. Sourced from mixed hemlock-fir stands, where the proportion of each species varies and is unknown, consistent with the subheading note for Hem-fir.
Hemlock Veneer for Plywood
Western hemlock sliced veneer sheets, 4.2 mm thick, end-jointed and sanded specifically for plywood crossbands. The coniferous origin and thickness under 6 mm place this product under tariff item 4408.10.00.
Laminated Fir Veneer for Doors
Fir veneer sheets sliced thin (≤6 mm), lightly laminated at edges for stability in door skin production. The sanded surface is ready for finishing, and the lamination does not change its classification as veneer.