Hem-Fir Peeled Veneer
Hem-fir peeled veneer, sliced into sheets not exceeding 6 mm and sanded for structural panels, is classified under tariff item 4408.10.00. The hem-fir definition from subheading note 4 applies to mixed stands of Western hemlock and fir, but the veneer itself is coniferous.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the wood is sawn lengthwise into thick planks
Sawn wood over 6 mm thick falls under heading 44.07.
If the veneer is laminated into panels
Plywood panels are classified under heading 44.12.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Document the species composition if claiming hem-fir, as mixed stands may require verification
• Ensure the veneer is ≤6 mm thick
• Check for any anti-dumping or countervailing duties on softwood lumber products
Related Products under Tariff item 4408.10.00
End-Jointed Pine Veneer Sheets
End-jointed pine veneer sheets, sliced to a thickness not exceeding 6 mm, are processed to extend length without waste and planed for plywood lamination. This product qualifies under tariff item 4408.10.00 as coniferous veneer, with end-jointing being a permitted operation that does not alter its essential character as veneer.
FSC Certified Spruce Veneer
FSC-certified spruce veneer sheets, sliced and sanded to under 6 mm thickness, are used for eco-friendly plywood facing. The certification supports traceability but does not affect tariff classification; the product remains coniferous veneer under tariff item 4408.10.00.
Laminated Fir Veneer for Doors
Laminated fir veneer for doors, sliced thin (≤6 mm) and lightly laminated at edges for stability, is used in door skin production. The light lamination does not change its classification as coniferous veneer under tariff item 4408.10.00, as it remains a veneer sheet.
Loblolly Pine Veneer for Packaging
Loblolly pine veneer for packaging, peeled into sheets ≤6 mm and sanded for durability, is used in crate and box veneering. This product is coniferous veneer under tariff item 4408.10.00, meeting the thickness and processing requirements.
Pine Veneer Sheets
Pine veneer sheets, sawn lengthwise and sliced to a thickness not exceeding 6 mm, typically planed and sanded for smoothness, are used for veneering furniture and plywood panels. This product is classified under tariff item 4408.10.00 as coniferous veneer.
Planed Larch Veneer Sheets
Planed larch veneer sheets, peeled and planed to precise ≤6 mm thickness for high-end furniture veneering, provide durable and attractive grain patterns. This product is coniferous veneer under tariff item 4408.10.00, meeting the thickness and processing requirements.