Hard maple
Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. > Other: > Of maple (Acer spp.) > Hard maple
Duty Rate (from China)
Products classified under Tariff item 4407.93.00.10
Birdseye Maple Sawn Planks 5/4 Thickness
Birdseye maple sawn planks, 5/4 thickness (approximately 31 mm), featuring the characteristic birdseye figure of hard maple (Acer saccharum). The wood is sawn lengthwise and lightly planed, with a thickness exceeding 6 mm, and has not undergone further manufacturing. It qualifies under tariff item 4407.93.00 as maple wood sawn lengthwise, not further worked than planed.
4407.93.00Bookmatched Hard Maple Flitches
Bookmatched hard maple flitches, sliced lengthwise from hard maple (Acer saccharum), planed, and exceeding 6 mm in thickness. These flitches are used for matched grain patterns in high-end tabletops and are not further manufactured. They qualify under tariff item 4407.93.00 as maple wood sawn or sliced lengthwise, planed, not further worked.
4407.93.00Curly Maple Planed Boards 4/4 Select Grade
Curly maple planed boards, 4/4 thickness (approximately 25 mm), made from select grade hard maple (Acer saccharum) with a distinctive curly figure. The boards are sawn lengthwise and planed smooth, exceeding 6 mm in thickness, and are not further manufactured. They fall under tariff item 4407.93.00 as maple wood sawn lengthwise, planed but not further worked.
4407.93.00Eastern Soft Maple Sawn Lumber 6x8 Dimensions
Eastern soft maple sawn lumber, cut to 6x8 inch dimensions, from soft maple species (Acer spp.). The lumber is sawn lengthwise with a thickness exceeding 6 mm, and may be planed or rough sawn. It is suitable for timber framing and rustic applications, and qualifies under tariff item 4407.93.00 as maple wood sawn lengthwise, not further worked.
4407.93.00FAS Grade Hard Maple Lumber
FAS grade hard maple lumber, typically 6/4 to 8/4 thickness (approximately 38-50 mm), from Acer saccharum. The lumber is sawn lengthwise, planed or rough sawn, exceeding 6 mm in thickness, and is not further worked. It falls under tariff item 4407.93.00 as maple wood sawn lengthwise, not further worked.
4407.93.00Hard Maple Carving Blanks
Hard maple carving blanks, kiln-dried, cut to 2x6x12 inch dimensions from hard maple (Acer saccharum). The blanks are sawn lengthwise, exceeding 6 mm in thickness, and are not further worked beyond planing. They qualify under tariff item 4407.93.00 as maple wood sawn lengthwise, planed, not further worked.
4407.93.00Hard Maple Drawer Side Stock
Hard maple drawer side stock, sawn from hard maple (Acer saccharum) and ripped to drawer side dimensions, surfaced on four sides (S4S), exceeding 6 mm in thickness. The stock is sawn lengthwise and not further worked. It falls under tariff item 4407.93.00 as maple wood sawn lengthwise, planed, not further worked.
4407.93.00Hard Maple End-Jointed Panels
Hard maple end-jointed panels, assembled from shorter lengths of hard maple (Acer saccharum), planed and sanded, exceeding 6 mm in thickness. The panels are sawn lengthwise and end-jointed, but not further worked. They qualify under tariff item 4407.93.00 as maple wood sawn lengthwise, end-jointed, not further worked.
4407.93.00Hard Maple Furniture Leg Blanks
Hard maple furniture leg blanks, rough sawn from hard maple (Acer saccharum), measuring 2-1/4 inches square by 30 inches long, exceeding 6 mm in thickness. The blanks are sawn lengthwise and not further worked, intended for final turning. They fall under tariff item 4407.93.00 as maple wood sawn lengthwise, not further worked.
4407.93.00Hard Maple Guitar Neck Blanks
Hard maple guitar neck blanks, selected from hard maple (Acer saccharum), sawn to 1-3/16 inch thickness, quarter-sawn for stability. The blanks are sawn lengthwise, exceeding 6 mm in thickness, and are not further worked. They qualify under tariff item 4407.93.00 as maple wood sawn lengthwise, not further worked.
4407.93.00Hard Maple Lumber 4/4 Thickness
Hard maple lumber, 4/4 thickness (approximately 25 mm), sawn from Acer saccharum, typically planed and sanded for woodworking. The thickness exceeds 6 mm, and the wood is sawn lengthwise without further manufacturing. It falls under tariff item 4407.93.00 as maple wood sawn lengthwise, planed or sanded, not further worked.
4407.93.00Quilted Maple Lumber Rough Sawn 8/4
Quilted maple lumber, rough sawn at 8/4 thickness (approximately 50 mm), from soft maple species (Acer spp.) with a quilted figure. The boards are sawn lengthwise, exceeding 6 mm in thickness, and are not planed or further worked. They qualify under tariff item 4407.93.00 as maple wood sawn lengthwise, not further worked.
4407.93.00Rock Maple Kiln Dried Planks 7/4 Thickness
Rock maple kiln-dried planks, 7/4 thickness (approximately 44 mm), from hard maple (Acer saccharum), with a sanded surface. The planks are sawn lengthwise, exceeding 6 mm in thickness, and are not further manufactured. They fall under tariff item 4407.93.00 as maple wood sawn lengthwise, sanded, not further worked.
4407.93.00Soft Maple Sawn Boards 8/4 Quarter Sawn
Soft maple sawn boards, 8/4 thickness (approximately 50 mm), quarter-sawn from red or silver maple (Acer rubrum or Acer saccharinum). The boards are planed and end-jointed, exceeding 6 mm in thickness, and are not further manufactured. They qualify under tariff item 4407.93.00 as maple wood sawn lengthwise, planed or end-jointed, not further worked.
4407.93.00Sugar Maple Planed Lumber 6/4 FAS Grade
Sugar maple planed lumber, 6/4 thickness (approximately 38 mm), FAS grade, from Acer saccharum. The lumber is sawn lengthwise, planed and sanded, exceeding 6 mm in thickness, and is not further worked. It falls under tariff item 4407.93.00 as maple wood sawn lengthwise, planed or sanded, not further worked.