Kiln-Dried Keruing Planks
Kiln-dried Keruing planks, with a thickness exceeding 6 mm, are sawn from tropical Dipterocarpus wood and are often used for musical instruments due to their stability. These planks are classified under tariff item 4407.29.00 as sawn tropical wood, provided they are not further worked beyond planing or sanding.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (2)Show detailsHide detailsCFIAAll ProgramsRequiredECCCWildlife Enforcement - commodity may be regulated by ECCCRequired
- CFIA
All Programs · Required
CANADIAN FOOD INSPECTION AGENCY: CFIA All Programs requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Within Range 4406110000–4412990000).
- ECCC
Wildlife Enforcement - commodity may be regulated by ECCC · Required
ENVIRONMENT AND CLIMATE CHANGE CANADA: ECCC Wildlife Enforcement - commodity may be regulated by ECCC requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Starts With 4407).
CBSA Single Window matching criteria, unknown
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the wood is not a tropical species listed in the subheading
Other non-coniferous sawn wood is classified under this item.
If the planks are specifically shaped for musical instrument parts
Parts of musical instruments are classified under Chapter 92, not Chapter 44.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the kiln-drying process is documented, as it may affect moisture content requirements
• Classify as sawn wood, not as finished articles
• Check if the planks meet CFIA import requirements for wood packaging or dunnage
Related Products under Tariff item 4407.29.00
African Mahogany Flitch for Veneer Production
African Mahogany flitches for veneer production are large sawn flitches of Khaya spp. African mahogany, with thickness exceeding 6 mm, prepared for slicing into veneers. They fall under tariff item 4407.29.00 as tropical wood sawn lengthwise, not further manufactured beyond sawing.
African Mahogany Sawn Lumber 4/4 Thickness
African Mahogany sawn lumber 4/4 thickness consists of sawn lumber from Acajou d'Afrique (Khaya spp.), exceeding 6 mm thick, planed and sanded for furniture making. It falls under tariff item 4407.29.00 as tropical wood sawn lengthwise, not further manufactured beyond planing and sanding.
Anigre Sawn Lumber 8mm Thick
Sawn lengthwise Anigre wood planks exceeding 6 mm in thickness, planed and sanded for woodworking applications. This tropical wood of Aningeria spp. is classified under tariff item 4407.29.00 as 'other' tropical sawn wood, used for fine furniture and cabinetry.
Anigre Tropical Hardwood Beams 15mm
Sawn Anigre beams planed and end-jointed, 15 mm thick, for structural millwork. This tropical wood of Aningeria spp. is classified under tariff item 4407.29.00 as 'other' tropical sawn wood, offering durability for architectural moldings and trim.
Aningre Sawn Panels for Veneer Matching
Sawn Anigre panels over 6 mm thick, selected for consistent grain matching in veneer applications. This tropical wood of Aningeria spp. is classified under tariff item 4407.29.00 as 'other' tropical sawn wood, used in high-end furniture where solid wood matches bookmatched veneers.
Bookmatched Khaya Anthotheca Pair Sets
Bookmatched Khaya anthotheca pair sets are pairs of African mahogany (Khaya anthotheca) sawn lumber over 6 mm thick for tabletops. They fall under tariff item 4407.29.00 as tropical wood sawn lengthwise, not further manufactured beyond sawing.