Virola Sliced Lumber for Cabinetry
Virola wood sliced to 9mm for cabinet doors and face frames, offering a cost-effective tropical alternative to mahogany. This product is sanded and exceeds 6mm thickness, qualifying under tariff item 4407.22.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the wood is not tropical
Non-tropical sawn wood is classified under other subheadings.
If the lumber is used in cabinet making
Joinery products fall under heading 4418.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the lumber is sliced lengthwise and exceeds 6mm thickness
• Provide species certification and dimensions
• Verify the wood is Virola and meets tropical wood definitions
Related Products under Tariff item 4407.22.00
Balsa Core Sawn Panels 15mm
Sawn Balsa panels, 15mm thick, for composite sandwich core construction in marine and wind energy applications. These panels are end-jointed and exceed 6mm thickness, qualifying under tariff item 4407.22.00 for tropical wood sawn lengthwise.
Balsa End-Grain Sawn Blocks
Balsa wood sawn into end-grain blocks, 20mm thick, for butcher block-style surfaces and modeling bases. These blocks are end-jointed and exceed 6mm thickness, meeting the criteria for tropical wood under tariff item 4407.22.00.
Balsa End-Jointed Lumber Strips
End-jointed balsa wood strips sawn lengthwise, sanded, 12 mm thick, for pattern-making and core stock. These strips are classified under tariff item 4407.22.00 as end-jointed tropical sawn balsa exceeding 6 mm in thickness, allowing length extension via finger joints.
Balsa End-Jointed Stringers
End-jointed Balsa stringers sawn to 25mm for wind turbine spar cores and aerospace doublers. These stringers are precision sanded and exceed 6mm thickness, qualifying under tariff item 4407.22.00 for tropical wood.
Balsa Sawn Guitar Soundboards
Specially sawn balsa wood blanks for acoustic guitar soundboards, bookmatched pairs, 4 mm thickness. Although the thickness is less than 6 mm, these blanks are classified under tariff item 4407.22.00 as sawn tropical balsa, as the heading allows for musical instrument components.
Balsa Sawn Planks 1x12
Balsa (Ochroma pyramidale) wood sawn into 1x12 wide planks, lightly sanded, thickness exceeding 6 mm. These planks are used for model-making and core materials and are classified under tariff item 4407.22.00 as 'other' tropical sawn wood, differentiated from unsawn wood.